Hotpoint Parts

Best Seller

Genuine Ge part

Hot Point Dryer Drive Belt

By: Ge

Part Number: WE12X10014

The Dryer Drive Belt is an OEM part for GE dryers that connects the motor to the drum, allowing the drum to rotate during the drying cycle. The belt measures approximately 87 inches long and 0.25 inches wide, with 4 ribs.

Over time, the Dryer Drive Belt can wear out or break, leading to the drum not turning.

Symptoms of a bad Dryer Drive Belt include:

The drum not spinning or rotating
A squealing or thumping noise coming from the dryer
The dryer stopping unexpectedly during a cycle

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Will not tumble
Won't start
Noisy

Do-It-Yourself Stories from Customers like You Was making a squeaking/squealing on start up Gerald G. • Nashua , NH • March 20, 2016

My GE dryer from the late 80's/early 90's was squealing when it would start up, belt or bearing I was thinking. I found a manual online that covered my model and I watched a video on this site that showed me how to take it all apart, mine was a bit different but the principles were the same. I took it apart and added some quick-disconnects to 2 wires so next time I can take the front panel off easily. When I got to the bearing it looked worn but not bad so I cleaned it and put it back. ... Read more

$15.38

Compare At:: $27.08
You Save:: $11.70

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Door Shelf Bar

4.9 (37)

By: Ge

Part Number: WR17X11890

The Freezer Door Shelf Bar is an OEM part compatible with GE refrigerators. This component serves as a support and retaining bar for the shelves located on the inside of the freezer door, ensuring they remain securely in place. This shelf bar measures 23” wide by 2” high and 5” deep

Symptoms that may indicate the need to replace the freezer door shelf bar include:

Shelves becoming loose or falling out of the freezer door
The bar itself becoming cracked, bent, or otherwise damaged

Causes of a faulty freezer door shelf bar can include physical impact or mishandling, excessive weight or force applied to the shelves, or general wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore refrigerator models.

Do-It-Yourself Stories from Customers like You Cracked and broken refrigerator door shelfs and vegetable trsy Phyllis W. • Indian Head , MD • December 09, 2016

Replaced with no problem. Exact fit. Less than 5 minutes. I will order from your company again. Arrived on scheduled date. Read more

$13.41

Compare At:: $15.82
You Save:: $2.41

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Rack Slide End Cap

4.9 (251)

By: Ge

Part Number: WD12X10304

The Rack Slide End Cap is an OEM replacement part for GE dishwashers. This small but essential component is designed to secure the end of the rack slide rail, preventing the dish racks from sliding off the track or becoming misaligned.

Symptoms of needing to replace a rack slide end cap include:

Dish racks sliding off the track or becoming dislodged
Difficulty in smoothly sliding the racks in and out
Visible wear, cracks, or damage to the end cap itself

Causes of a faulty rack slide end cap can include normal wear and tear over time, exposure to heat or moisture, or physical damage due to impact or mishandling.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.

This part fixes the following symptoms

Door latch failure

Do-It-Yourself Stories from Customers like You Water would not drain Paula M. • Crestview Hills , KY • November 14, 2014

Replaced the pump drain assembly Read more

$10.74

Compare At:: $24.73
You Save:: $13.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Surface Burner Terminal Block Kit

4.8 (88)

By: Ge

Part Number: WB17T10006

The Terminal Block Kit is an OEM replacement part for GE electric ranges. This kit replaces the points of connection delivering power to control circuits and surface coil elements atop the cooktop.

Causes of failure are prolonged heat cycling which slowly breaks down solder joints and insulator coating on terminals conducting power. Liquids spilled can seep into connection areas over time promoting electrical faults.

Symptoms of a faulty terminal block include:

Inability to ignite or regulate specific burners
Burners that glow intermittently or fail to respond
Tripped circuit breakers upon use of problematic zones
Buzzing or cracking noises from under cooktop areas

This genuine GE kit is also compatible with Hotpoint and RCA electric ranges.

This part fixes the following symptoms

Element will not heat
Won't start

Do-It-Yourself Stories from Customers like You THE TERMINAL BLOCK WAS BURN AND IT DOES NOT TURN HOT. Kenny W. • San Jose , CA • April 06, 2014

I ORDER THE TERMINAL BLOCK KIT, AND FOLLOW THE VIDEO HOW TO REPAIRE. IT IS VERY EASY.IT TOOK ME 10 MIN. Read more

$19.54

Compare At:: $25.40
You Save:: $5.86

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Timer

4.9 (296)

By: Ge

Part Number: WE4M533

The Timer is an OEM part for GE dryers that is responsible for ensuring that the dryer operates for the set amount of time, enabling different cycles and functions to occur at the correct intervals. The timer regulates the start, duration, and end of each drying cycle. Over time, timers can wear out or malfunction due to electrical issues or mechanical wear, leading to problems with the dryer's operation.

Symptoms of a bad Timer include:

The dryer failing to start or stop at the proper times.
Only certain cycles working.
The dryer running continuously without shutting off.

Causes of a bad timer can stem from a variety of issues, including electrical shorts, worn contacts within the timer mechanism. Regular usage and age can contribute to these problems.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Shuts off too soon

Do-It-Yourself Stories from Customers like You Could not turn the timer to set the washer cycle Jay C. • Wadsworth , OH • November 12, 2014

After taking the timer apart to see why it would not turn I found the timer motor was jammed. Taking the motor apart I found a broken gear. Looked up the model number of the dryer and found a new timer assembly thru appliancepartspros.com I ordered, a very easy process, received the part 2 days later. Installed the assembly in about 5minutes and had the dryer back up and running Read more

$91.95

Compare At:: $108.50
You Save:: $16.55

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Water Tank Assembly

4.9 (154)

By: Ge

Part Number: WR17X11440

The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature.

Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water.

Symptoms of a bad Water Tank Assembly include:

Leaks or puddling water beneath the refrigerator
A noticeable drop in water flow from the dispenser
Unpleasant taste or odor in the dispensed water
Visible cracks or damage to the tank or its connections

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Water tank leak Gordon T. • Jonesboro , AR • January 27, 2017

Our refrigerator takes care of my wife and I, along with our children when they visit, and the grand kids. Over the years, it's seen its fair share of wear and tear. Thankfully, nothing major has happened that hasn't been able to be repaired right here in the home, and by me. Our refrigerator is a GE side-by-side with an ice maker/water dispenser, and has held up well. I've ordered parts for it from AppliancePartsPros.com for all of its repairs, and while GE/Frigidaire have been changing out a... Read more

$42.34

Compare At:: $50.81
You Save:: $8.47

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Pressure Sensor Assembly

5.0 (8)

By: Ge

Part Number: WD21X25468

The Pressure Sensor Assembly is an OEM part for GE dishwashers. It monitors the water level within the dishwasher, ensuring the correct amount of water is used during each wash cycle for optimal cleaning performance.

Causes of a bad pressure sensor assembly can include wear and tear over time, clogs or debris obstructing the sensor, electrical issues, or damage to the sensor housing. Malfunctioning sensors can result from exposure to hard water minerals or detergent residues that affect the sensor's accuracy.

Symptoms of a bad pressure sensor assembly include:

Dishwasher not filling with water properly
Overfilling or underfilling with water
Error codes related to water levels
Dishes not being cleaned effectively

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You H2o error code Joe D. • Lockport , NY • August 07, 2025

Tried to fix with a non GE part, didn’t work. Your GE brand pressure sensor worked like a charm Read more

$18.95

Compare At:: $22.55
You Save:: $3.60

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Door Gasket Insert

4.9 (143)

By: Ge

Part Number: WD08X10015

The Door Gasket Insert is an OEM part for GE dishwashers, specially designed to create a watertight seal along the dishwasher door's perimeter. This insert is crucial for preventing water from leaking out of the dishwasher during operation. It fits snugly into the door's groove, ensuring that the door closes securely and no water can escape during the washing and rinsing cycles.

Causes for a Door Gasket Insert to fail include regular wear and tear from daily use, exposure to harsh detergents and high temperatures, and physical damage from loading and unloading dishes.

Symptoms of a bad Door Gasket Insert include:

Water leaking from around the dishwasher door.
The dishwasher door feels loose or doesn't close as tightly as before.
Visible signs of wear, such as cracks, brittleness, or deformation in the gasket.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Water emptied out under the door of my 24 yr old GE dishwasher on to the floor. Andrea B. • Harrisburg , PA • September 22, 2018

After researching on the APP site, I decided what I thought I would need and purchased a new Gasket, Gasket Insert, Left & Right Corner Baffles from APP. The parts were shipped immediately. However, I’m an 80 yr. old female so I procrastinated for almost 6 weeks before deciding to 'tackle' the repair myself rather than hiring an appliance repair person or "handyman". I went back into the AppliancePartsPros site and reviewed the wonderful videos related to the repair since Matt had made it... Read more

$12.36

Compare At:: $19.38
You Save:: $7.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Lamp

4.9 (186)

By: Ge

Part Number: WE05X20431

Note: 10-watt bulb

The Lamp is an OEM part for GE dryers. This part illuminates the dryer's drum interior, enhancing visibility for loading and unloading garments. It ensures that users can easily see their clothes and any items inside the drum, particularly useful in low-light conditions.

Replacing a non-functional dryer lamp is important for maintaining the functionality and convenience of your GE dryer, ensuring you can effectively manage your laundry.

Symptoms of a malfunctioning dryer lamp include:

A lack of light inside the drum when the dryer door is opened or during operation
Flickering or intermittent light indicating a loose connection or nearing the end of the lamp's lifespan
Complete failure to illuminate, which could stem from a burnt-out bulb or electrical issues within the dryer

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You Light bulb in dryer Jeff P. • Bradenton , FL • September 03, 2017

It was an easy repair just screwed in. The ordering process and simple no hassle and got here fast! I will definitely order from you again Read more

$7.55

Compare At:: $8.91
You Save:: $1.36

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Dishwasher Door Gasket

4.9 (133)

By: Ge

Part Number: WD08X10057

The Dishwasher Door Gasket is an OEM part for GE dishwashers. It forms a seal around the dishwasher door to prevent water from leaking during the wash cycle. The gasket has an approximate length of 89 inches.

Causes of a bad door gasket can include wear and tear over time, improper cleaning or maintenance, or damage from sharp objects or harsh chemicals. These issues can cause the gasket to become brittle, cracked, or misshapen, compromising its sealing capability.

Symptoms of a bad door gasket include:

Water leaking from the bottom of the dishwasher door
Visible cracks or tears in the gasket
The dishwasher door not closing properly
Excess moisture around the dishwasher area

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Note: For the short 4" piece of gasket in the bottom middle, also order WD08X10015.

Do-It-Yourself Stories from Customers like You Water and soap leaking from door of our old GE profile performance dishwasher Wayne T. • Haines City , FL • June 10, 2018

My wife is attached to her old, simple, no bells and whistles dishwasher. When it started leaking from the bottom of the door, I looked up the possible fix and thought the price of the gasket probably out-valued the dishwasher. I thought that it was time to buy a new one. After looking at the prices of dishwashers (even with a Memorial Day sale) I was shocked at high they have gotten. The price of the gasket, which isn't even a third of the price of a bottom of the line DW, was looking even... Read more

$81.95

Compare At:: $107.94
You Save:: $25.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Dryer Timer

5.0 (18)

By: Ge

Part Number: WE04X25280

The Timer is an OEM part for GE dryers. It is responsible for controlling the duration of the drying cycles by regulating the electrical components within the dryer. This component ensures that the dryer runs for the correct amount of time based on the selected settings, enabling efficient and effective drying of clothes.

Causes of a bad timer can include electrical failures, worn-out contacts, or internal mechanical issues. A malfunctioning timer can lead to improper cycle durations, the dryer not starting, or stopping prematurely.

Symptoms of a bad timer include:

The dryer not advancing through the drying cycles
The dryer stopping mid-cycle or running continuously without stopping
The timer knob not moving or making unusual noises
Inconsistent drying times or clothes not drying properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer selector knob and timer broken John L. • Jacksonville , FL • June 11, 2019

The selector knob and timer quit working on our GE dryer. We noticed the plastic selector knob was cracked inside when we pulled it off. We decided to order a new timer along with the selector knob just in case the new knob didn't solve the problem. We put on the new knob as easy as we pulled it off and the dryer would turn on again, however it was not going off in the selected amount of time it was supposed to. So it turns out we did need the timer part as well. These parts came in the... Read more

$77.52

Compare At:: $93.02
You Save:: $15.50

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Drain Hose

4.9 (176)

By: Ge

Part Number: WH41X10096

The Drain Hose is an OEM part for GE washing machines. It plays a crucial role in expelling used water from the washer to the household drainage system. If you need to replace the drain hose clip as well, order part number WH16X513.

Causes of a bad Drain Hose can include physical damage such as splits or holes, clogging from lint and debris, or deterioration due to age and frequent exposure to water and detergents.

Symptoms of a bad Drain Hose include:

Water leaking from the back or underneath the washing machine,
Slow or incomplete drainage during or after the wash cycle,
Visible signs of wear or damage on the hose.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking washer drain hose Oliver C. • Linwood , NJ • July 16, 2014

Replaced hose with new one from Appliance Parts. Delivery was exceptionally fast. Appliance was up and running next day. Read more

$17.95

Compare At:: $24.06
You Save:: $6.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Lint Filter Assembly

4.9 (198)

By: Ge

Part Number: WE18X25100

The Dryer Lint Filter Assembly is an OEM replacement part for GE dryers. It serves as a crucial barrier, preventing lint and other debris from accumulating in the dryer's internal components and exhaust system. This filter helps ensure proper airflow and drying efficiency while reducing potential fire hazards caused by lint buildup.

Symptoms of a bad dryer lint filter assembly include:

Longer drying times due to restricted airflow
Excessive lint buildup on clothing or in the dryer drum
Overheating or hot spots within the dryer
Visible signs of damage or wear on the lint filter housing or mesh

Causes of a bad lint filter can include excessive lint buildup, physical damage to the filter mesh or housing, or improper installation. A clogged or damaged lint filter can lead to decreased drying efficiency, increased energy consumption, and potential fire hazards.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Needed new lint filter for my ge dryer Ann L. • Bloomington , IN • August 01, 2014

I ordered the new filter on one day and it was delivered the next. Other web sites told me the part was no longer available and I was very surprised and pleased that Appliance Parts Pros had it in stock and shipped it so promptly. Thank you. Read more

$58.43

Compare At:: $69.53
You Save:: $11.10

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Door Switch

4.9 (155)

By: Ge

Part Number: WB24X829

The Microwave Door Switch is an OEM part for GE microwaves, designed to prevent the microwave from operating when the door is open by interrupting the power whenever the door is not securely closed. The door switch is an essential safety feature.

Symptoms of a failing Microwave Door Switch include:

The microwave not starting or heating
Running when the door is opened
Unusual noises when the door is closed

Causes of a bad Microwave Door Switch can result from repeated opening and closing of the door or slamming that can cause the switch to degrade or become misaligned, leading to intermittent or failure.

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

This part fixes the following symptoms

Doesn't shut off
No heat
Won't start

Do-It-Yourself Stories from Customers like You Ge microwave ran when turned off if door was shut Jason A. • Cary , NC • April 02, 2017

The first symptom was our microwave would continue to run after the time was up. The light would go out, the turn table would stop but you could still hear the microwave running and whatever was in it would continue to cook. The only way to stop it was to open the door. It was intermittent at first but eventually it would always run no matter what as long as the door was closed. Several other posts referenced these switches as the problem. I just replaced both and problem gone. It turns out... Read more

$26.54

Compare At:: $33.56
You Save:: $7.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Refrigerator Door Gasket

4.7 (19)

By: Ge

Part Number: WR24X10231

The Refrigerator Door Gasket is an OEM part for GE refrigerators. This essential component forms a seal around the perimeter of the refrigerator door, ensuring that cold air stays inside and warm air stays out.

Symptoms of a bad Refrigerator Door Gasket include:

Noticeable gaps or tears in the gasket that allow air to pass through.
Condensation or frost buildup around the edge of the door.
The refrigerator running more frequently than usual, indicating a loss of cooling efficiency.
Difficulty in keeping the door closed or having it pop open.

Causes of a bad door gasket can include regular wear and tear from opening and closing the door, material degradation over time due to exposure to the elements and cleaning chemicals, or physical damage from accidental pulling or stretching.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This part fixes the following symptoms

Door sweating

Do-It-Yourself Stories from Customers like You Needed a refrigerator gasket for fresh food section of a hot point fridge Michael C. • Presque Isle , ME • September 08, 2014

Watched the repair video you provided on line and it went perfect. really like those videos. this is the second gasket we put in. Read more

$74.95

Compare At:: $89.19
You Save:: $14.24

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Ge part

Hot Point Timer Knob Assembly

4.9 (360)

By: Ge

Part Number: WE1M654

The Timer Knob Assembly is an OEM part for GE dryers that is responsible for controlling the dryer's timer, allowing users to select the desired cycle duration and start the dryer. Over time, the timer knob can become worn or damaged due to frequent use or accidental impact, leading to difficulties in setting the dryer timer or starting the machine. If you need the bisque colored version of this knob, you can order it here: WE1M483.

Common causes of a bad timer knob include cracking or breaking due to frequent use, the internal mechanism wearing out, or the knob becoming loose and no longer fitting securely on the timer shaft.

This part fixes the following symptoms-

The knob slipping or failing to grip the timer shaft
Cracks or breaks in the knob
The knob coming off the timer shaft completely

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances.

Do-It-Yourself Stories from Customers like You I was unable to select a cycle knob wouldn't advance and stay Tamara I. • Hatfield , PA • September 23, 2014

I actually called a repair service in our area. The serviceman asked questions and detected that I didn't need a timer unit but thought it was just a knob that was required. He offered to come out but the expense would be considerable. I am SO relieved that it was indeed the knob, and the dryer was fixed. In this time in our lives, every penny counts. I must applaud the serviceman for his honesty and dedication to his trade. He directed me to this website, but also added if there were any... Read more

$26.95

Compare At:: $32.97
You Save:: $6.02

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Hotpoint Parts

Hot Point Dryer Drive Belt

Hot Point Door Shelf Bar

Hot Point Rack Slide End Cap

Hot Point Surface Burner Terminal Block Kit

Hot Point Timer

Hot Point Water Tank Assembly

Hot Point Pressure Sensor Assembly

Hot Point Door Gasket Insert

Hot Point Lamp

Hot Point Dishwasher Door Gasket

Hot Point Dryer Timer

Hot Point Drain Hose

Hot Point Lint Filter Assembly

Hot Point Door Switch

Hot Point Refrigerator Door Gasket

Hot Point Timer Knob Assembly

Appliance Type