Kenmore / Sears Control Board

This electronic clock timer is the oven control interface that displays time and manages timed bake and self-clean functions, restoring clock and timer features for normal oven operation. It replaces a faulty or unresponsive control display. What it does:

• Displays clock and countdown timer so you can set and monitor cooking times
• Controls oven timed functions (delay start, timed bake/clean) when the interface is responsive
• Replaces units that show a blank display, have unresponsive buttons, or fail to keep time
• Works as the user-facing control for programming and confirming oven settings

• One clock timer assembly

• Disconnect power to the range before starting; verify power is off at the breaker
• Expect to remove the control panel to access the module; save screws and mounting hardware
• Handle the display and ribbon/connector carefully to avoid damage; avoid bending contacts

This main electronic control board manages refrigerator functions and user commands, restoring coordinated operation of the compressor, fans, defrost cycle and display when the original board is faulty. Replacing a failed board returns control signals and timing to the appliance. What it does:

• Regulates compressor, fan and defrost timing to maintain proper temperatures
• Processes user inputs and displays status messages or error codes
• Sends/receives signals to sensors and other modules for coordinated operation
• Common symptoms of a failing board: no display or lights, unit not cooling, erratic cycles, or persistent error codes

• One main electronic control board

• Disconnect power before starting any repair to avoid shock or damage
• Handle the board by the edges and avoid static discharge; wear an ESD strap if available
• Verify connector orientation and seat all harnesses fully during reinstallation

This electronic control module manages a range of oven/cooktop functions so the appliance responds correctly to front-panel commands and control inputs. Replacing a failed module restores normal control and display operation. What it does:

• Receives input from touchpads/knobs and sends signals to heating elements, relays, and sensors
• Controls oven timing, temperature setpoints, and cycle sequencing
• Powers or drives the display and indicator lights when working properly
• A failed module can cause unresponsive controls, blank or erratic displays, or interrupted heating cycles

• Disconnect all power to the appliance before starting work to avoid shock or damage
• Handle the board by its edges and avoid static discharge; wear a grounded wrist strap if available
• Verify connector orientation and seating; do not force connectors or components

This electronic control board manages the appliance's functions and timing, restoring proper operation to controls and cycles when the original board fails. Replaces a failed or unresponsive control module to help the appliance run correctly. What it does:

• Regulates user inputs, cycles, and timing signals for the appliance's functions
• Communicates with sensors and relays to start and stop motors, valves, and heaters
• Can resolve symptoms like unresponsive controls, incorrect cycles, or intermittent operation
• Helps stop erratic behavior caused by damaged or shorted circuit components

• One electronic control board

• Disconnect power before accessing the control board to avoid shock or damage
• Handle the board by its edges and avoid touching components or connector pins
• Verify wiring harness connectors match and are fully seated before restoring power

The Control Board is an OEM component specially designed for Frigidaire wall oven/microwave combo units. Responsible for interfacing with electronic controls, it precisely manages cooking programs.  

Prolonged exposure to elevated microwave oven temperatures causes typical deterioration reducing functionality over many years. Baking flexibility suffers without responsive command processing.

Causes involve normal electronic component fatigue from heat exposure across thousands of cooking cycles. Impacts introduce abrupt damage risks.

Symptoms indicating board issues involve:

• Unresponsive touch controls and display errors  
• Failure to initiate preprogrammed cooking functions
• Inability to accurately monitor temperature or time

Replacing with this OEM Frigidaire board restores versatile touchscreen guidance. Compatibility also fits some Kenmore, Electrolux, and Gibson combos renewing advanced bake settings for consistent, hands-free results through authorized maintenance. 

This mechanical selector timer controls the wash cycle sequence and timing, restoring reliable cycle advancement and automatic transitions. It replaces a worn or non-advancing control to bring consistent cycle timing back to the appliance. What it does:

• Advances washer cycles and engages appropriate motor and valve circuits at set intervals
• Ensures timed transitions between fill, agitate, drain and spin stages
• Commonly needed when cycles won't advance, stop mid-cycle, or settings don't change
• Works as the electro-mechanical clock/controller that coordinates cycle operations

• One mechanical timer assembly

• Disconnect power before attempting service to avoid shock or injury
• Removal typically requires access to the control panel and disconnecting wiring harnesses; note wire locations or take a photo before removing
• Handle the timer gently; install only if identical to the original and fully secured before restoring power

This inverter converts the refrigerator's incoming power and controls compressor speed so the cooling system runs efficiently. Replacing a failed inverter restores proper compressor operation and helps return normal cooling performance. What it does

• Converts incoming AC power to the DC signals the variable-speed compressor needs
• Regulates compressor speed for temperature control and energy-efficient operation
• Works with the fridge's main control systems to manage compressor operation

• Disconnect power to the appliance before beginning any service to avoid shock
• Handle the board by its edges and avoid touching components; observe ESD precautions
• Mount and connect using original-style fasteners and harness connectors; verify secure, corrosion-free connections
• Check compressor, main control board, and harness for related issues if symptoms persist after replacement.

This is a Frigidaire washer/dryer combo timer. The washer or dryer timer controls all the timed functions of the appliances, including the cycles and draining. Without a working timer, there is no way for the machine to judge when to start certain parts of the cycle, when to drain water, start rinsing, switch from hot to normal air, and many other tasks. When a timer goes out on these machines, a replacement needs to be ordered immediately. To replace this part, first unplug the appliance from the main power source. This timer is a genuine OEM replacement part sourced directly from Frigidaire. This part is only available individually and is not included with other parts or the main appliance. This product is compatible with Frigidaire appliances.

This electronic console control replaces a failed or unresponsive control module so your appliance can send and receive commands reliably. It restores user input and cycle control for normal operation. What it does:

• Serves as the main control interface to manage cycles, timing, and functions
• Interprets button/knob inputs and sends signals to motors, valves, and heaters
• Prevents erratic behavior caused by failed or damaged control electronics
• Commonly used when displays, lights, or cycle selection stop responding

• One electronic console control module

• Disconnect power before attempting replacement to avoid shock or damage
• Handle the board by edges; avoid touching electronic components or solder joints
• Check connectors for proper seating and secure mounting per service manual

This electronic clock timer assembly replaces a failed oven clock and timer so you can set, monitor and control timed cooking functions. It restores the display and timer features that help keep your oven on schedule. What it does:

• Displays the oven clock and kitchen timer so you can track cooking time
• Enables timed bake and delay-start functions on compatible ranges/ovens
• Provides user input for setting cook times and timer alerts
• Restores control-panel timekeeping and timer countdown functionality

• One electronic clock timer assembly

• Disconnect power to the appliance before beginning any work
• Remove the control panel or trim as required; handle the new assembly and ribbon/connector with care
• Reconnect the wiring harness securely and verify the clock and timer functions after power is restored

This clock timer is the oven's electronic timer and time-of-day display, letting you set cook times, delayed starts, and monitor remaining bake/roast time for accurate cooking. Replaces a failed or unresponsive oven clock. What it does:

• Displays the time of day and countdown for timed cooking functions
• Enables delayed start and automatic shutoff for set cook cycles
• Sends timing signals to the oven control so timed operations start/stop properly
• Common symptoms: blank or flashing display, timer won't keep time, or timed bake/auto-stop doesn't work

• Disconnect power to the appliance before starting any work
• Access typically requires removing the control panel or console—use appropriate hand tools
• Handle the display and ribbon/connector gently to avoid damage

This is the electronic control board that governs the appliance's main functions and user interface, replacing a failed board to restore normal control and cycle operation. It fits the OEM form and connects to factory wiring. What it does:

• Manages timed cycles, user inputs, and electronic commands for the appliance
• Controls display and indicator responses so settings register correctly
• Helps resolve symptoms like unresponsive controls, incorrect cycle behavior, or blank/error displays
• Interfaces with sensors and relays to coordinate heating, motor, and valve operation

• Disconnect power to the appliance before attempting service to avoid shock
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available

This electronic control board is the refrigerator's main logic board that manages temperature, defrost cycles and user controls so the appliance responds correctly to settings and sensors. What it does:

• Controls compressor, fans and defrost timing based on sensor inputs
• Interprets user commands from the control panel and display
• Can cause no cooling, erratic temperatures or nonresponsive controls when faulty
• May affect defrost operation and timed cycles if the board fails

• One electronic control board (main)

• Always disconnect power to the appliance before starting work
• Handle the board by edges and avoid static discharge; ground yourself before touching electronics
• Verify connectors and sensor harnesses are fully seated and undamaged before reassembly

This electronic control board manages the oven/range user interface and core control functions so your appliance responds correctly to settings, timers and bake/broil commands. It replaces a failed or unresponsive control module. What it does:

• Interprets user inputs and runs oven cooking cycles, timers and clocks
• Sends signals to heating elements, relays and safety controls to regulate temperature
• Powers and updates the display and touchpad/controls
• Common symptom fixes: blank or error display, unresponsive keypad, oven not heating or not following selected cycles

• Disconnect all power at the breaker before starting work; this part is live-voltage sensitive
• Handle the board by the edges and avoid static discharge; wear an anti-static wrist strap if available
• Confirm the board PN and appliance model before ordering; mounting screws and wire harnesses must match