Kenmore / Sears Control Board

This main PCB is the control board that manages your appliance's functions and user interface, restoring reliable cycle selection, timing, and display feedback when the original board fails. What it does:

• Interprets user commands and runs wash/dry cycles, timers, and program logic
• Powers and communicates with the control panel/display and sensors
• Regulates valve, motor, heater, and other component signals
• Resolve symptoms like no power to controls, unresponsive panel, error codes, or erratic operation

• Disconnect power and follow lockout/tagout before starting work
• Handle the board carefully; avoid electrostatic discharge and touching components
• Installation typically requires removing the control panel and connectors; keep track of fasteners and wire locations
• Verify model compatibility and wiring harness orientation before powering on; refer to the service manual

This electronic control board replaces the appliance's main logic module to restore keypad/display operation and cycle control. It ensures the unit responds correctly to user inputs and runs programmed cycles when the original board fails. What it does:

• Manages user interface signals, timed cycles, and electronic controls for normal operation
• Resolves symptoms such as unresponsive buttons, blank or erratic display, or appliances that won't start or complete cycles
• Replaces a failed or intermittent main circuit board to stop random resets or control errors
• Works as the primary control for coordinating sensors, timers, and relays

• One electronic control board

• Disconnect power before accessing or replacing the control board to avoid shock or damage
• Handle the board by its edges and avoid touching components or connector pins
• Some models require removing the console or control panel; keep track of screws and grounding straps
• If connectors are tight, gently pry straight out—do not force or bend pins

This electronic clock timer assembly replaces a failed range/oven console clock and timed-cook control so the oven clock, kitchen timer and timed cooking functions work correctly. It restores visible time display and timer control for scheduled cooking. What it does:

• Displays the oven/range time and runs the kitchen timer
• Enables timed start/stop and delayed-cook settings when supported by the console
• Replaces a clock that is blank, frozen, or showing incorrect time
• Resolves unresponsive timer controls or intermittent display issues

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle the control assembly and ribbon/connectors carefully to avoid damage
• Verify electrical connections and secure mounting during reassembly

This electronic control board manages the refrigerator's core functions so the appliance runs on schedule and responds to user commands. Replaces a failed board to restore control of cooling cycles, displays, and timed functions. What it does:

• Controls compressor, evaporator fan, defrost timing and other automated cycles to maintain proper cooling.
• Processes user inputs and display signals for temperature settings and mode changes.
• Can stop appliance operation or cause error lights when the original board fails.
• Common-symptom linkage: fridge not cooling, display or controls unresponsive, frequent or unexplained defrost cycles.

• One electronic control board

• Disconnect power to the appliance before attempting service to avoid shock or damage.
• Handle the board carefully; avoid static discharge and do not touch component leads.
• Reconnect all wiring harnesses exactly as removed; ensure connectors are fully seated.

This generator is the OEM replacement rotary cam assembly that times and drives mechanical sequences so your appliance operates correctly. It restores proper cycle sequencing to help eliminate failures caused by a worn or damaged cam. What it does:

• Rotates and indexes internal cams/gears to control mechanical switching and timing
• Ensures correct sequencing of cycles and component engagement
• Commonly replaces noisy, stuck, or non-indexing cam assemblies
• Helps resolve symptoms like intermittent operation, failed cycle changes, or mechanical binding

• One generator (rotary cam assembly) as shown

• Disconnect power before servicing to avoid shock or injury
• Access may require panel removal and basic hand tools
• Verify alignment and timing marks during installation for proper operation

Electronic control board that manages the range hood's fan, lights and user controls to restore normal operation when the original board fails. Use this direct-replacement board for symptoms like unresponsive buttons, lights that won't turn on, or a fan that won't run. What it does:

• Controls fan speeds, on/off functions and light operation via the hood's user interface
• Processes button/relay signals to activate motors and lighting circuits
• Replaces a faulty board causing intermittent or no response from controls
• Stops erratic behavior caused by failing electronic components

• Disconnect power to the appliance at the breaker before starting work
• Handle the board carefully; avoid contact with circuit traces and use anti-static precautions if available
• Verify the part number on the existing board before installing

This washing machine main control board is manufactured by Whirlpool. This board is responsible for monitoring and managing all the functions of the washer, such as filling, agitating, spinning, and draining. A control board can suffer from corrosion and degradation due to exposure to heat, moisture, and other factors.Signs that the main control board may be faulty include erratic operation, failure to finish a cycle, or even complete failure of the appliance. The washer's display may also show error code F1 E1. To get the washer back in working condition the board will need to be replaced. After replacing the main control board, the washing machine will need to be recalibrated.This genuine OEM part is sold individually and is compatible with Whirlpool and Kenmore washing machines.

The Cntrl-Elec is an OEM part for Whirlpool dishwashers. As the control and electronic component, it governs all of the major functions and operations of the dishwasher. The control board contains integrated circuits, microprocessors, and electronic components that facilitate cycles, temperature regulation, safety features, and user input.

Over time, the electronic components inside the controller can degrade or become damaged. Environmental factors like surges, fluctuations in power, and other electrical issues may also potentially cause failure. 

Symptoms of a bad controller can include:

• Not operating or cycling at all
• Inability to start or stop cycles
• Fault codes displayed
• Issues with heating or drying
• Buttons or control panel not responding

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.