Gas Conv Kit Parts

Liquid propane. High altitude. Simmer burner

Burner orifice spud for cooktop gas conversion or replacement. Installs on main burner valve. Replace if damaged, incorrect size, or missing.

Liquid propane. Main burner

Replace your range orifice spud if the original is cracked, damaged, or missing. This component installs in the burner assembly to regulate gas flow.

This LP gas orifice spud meters propane flow to your range burner. Replace if the original is clogged, damaged, or missing to restore proper gas delivery.

High altitude conversion kit for gas cooktops. Includes orifices to adjust gas flow for elevations above 4,000 feet. Replace if missing or incorrect.

This LP/NAT conversion kit contains the orifice spuds and instructions needed to convert a compatible gas range or oven between liquid propane (LP) and natural gas so burners operate with the correct fuel flow and combustion. What it does:

• Replaces factory orifice spuds to match the appliance to LP or natural gas
• Restores proper burner flame size and performance after conversion
• Helps prevent incomplete combustion caused by incorrect orifice sizing
• Use when appliance was shipped for a different fuel type or after regulator changes

• Turn off gas supply and electricity before servicing; leak-test all connections after installation
• Follow the appliance's service manual and conversion instructions exactly
• Use the correct orifice(s) for your fuel type
• Retain removed parts and documentation for warranty and service records

Leak limiter orifice for dryer gas conversion kits. Installs in the burner assembly to regulate gas flow. Replace if damaged, cracked, or missing.

Meters gas flow to the dryer burner. Replace if damaged, clogged, or when converting between natural gas and LP. Installs at the burner assembly.

This LP conversion kit lets a gas range or oven be converted for use with propane (LP) fuel, helping burners run correctly and safely after changing fuel types. Use the kit when converting from natural gas to LP. What it does:

• Replaces orifices and/or fittings needed to meter propane correctly for bake, broil and top burners
• Ensures proper fuel flow and burner combustion when appliance is set up for LP
• Helps stop symptoms of incorrect gas setup such as unstable flames, poor heating, or hard ignition after fuel change
• Works as the service kit needed during an official gas-type conversion

• Shut off gas supply and electrical power before starting work
• Follow the included instructions for replacing orifices/fittings and adjusting the regulator or air shutters if required
• After installation, check all connections for leaks and verify proper burner operation

Rear burner orifice for gas cooktops. Controls gas flow to the main burner. Replace if damaged, clogged, or when converting fuel types.