Range Hood Parts

Replacement carbon (charcoal) filter that helps reduce cooking odors when your range hood is set to recirculate instead of venting outside. Restores odor-capture performance for non-vented installations and keeps kitchen air fresher. What it does:

• Adsorbs and reduces common cooking odors produced during frying, grilling, and sautéing
• Intended for use in recirculating/ductless hood configurations where air is returned to the kitchen
• Replaces a worn or saturated carbon/charcoal filter that no longer controls smells
• Symptom link: persistent or increased kitchen odors when the hood fan is running

• Turn off power to the hood and follow the owner's manual before servicing
• Access the filter housing per the hood model instructions, remove the old filter, and install the new one in the same orientation
• Dispose of the used filter according to local regulations; do not attempt to wash or regenerate disposable carbon filters

This light bulb restores dependable illumination in your ventilation appliance, improving visibility for cooking and cleaning. Replace a burned-out lamp to bring your range hood or fan back to normal lighting performance. What it does:

• Provides light for the cooktop or workspace under your hood/fan
• Replaces a failed, dim, or flickering bulb
• Helps maintain safe visibility during cooking and cleanup
• Direct replacement for the original lamp specified for the unit

• 1 light bulb

• Disconnect power at the breaker or unplug the unit before servicing
• Allow the existing bulb and lens/cover to cool completely
• Remove the lens/cover as directed in your model's instructions and install the new bulb without exceeding the wattage/voltage on the unit's rating label
• If your unit uses a halogen capsule, avoid touching the glass with bare hands; use gloves or a clean tissue

This replacement light bulb restores illumination in your microwave, making it easier to see food and controls during use. Installing a new bulb brings back dependable lighting for the cavity or cooktop area, depending on your model. What it does:

• Supplies light when the appliance calls for it
• Improves visibility to monitor cooking progress and the work area
• Typical symptoms: no light, dim or flickering light, intermittent operation, blackened or broken bulb
• Normal wear item that eventually burns out and needs replacement

• Includes 1 light bulb

• Disconnect power at the outlet or breaker before servicing
• Allow the old bulb and surrounding area to cool before handling
• Remove the lens or access cover per your model's manual; install the new bulb fully seated without forcing
• Handle by the base and keep oils off the glass; use only the bulb type and wattage specified for your model

This Filter is an OEM part for Frigidaire range hoods. It plays a vital role in maintaining the efficiency and cleanliness of your range hood by trapping grease, smoke, and other airborne particles during cooking. 

The effectiveness of a range hood filter can diminish over time due to the accumulation of grease and debris, which can impede airflow and reduce the hood's ability to extract unwanted cooking fumes.

Symptoms of a dirty or failing filter include:

• Reduced suction and efficiency in smoke and odor removal.
• Grease buildup on the filter is visible upon inspection.
• The range hood becoming noisier, indicating strain on the motor.
• Persistent odors in the kitchen, not effectively cleared by the hood.
• Poor overall air quality in the cooking area.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This factory replacement plate provides a rigid, stable mounting surface inside your unit. Replacing a bent or damaged plate helps keep internal components securely positioned and operating smoothly.

• Supports and locates attached components for correct fit and function
• Helps maintain alignment to reduce rubbing, vibration, or rattling noises
• Restores secure mounting when the original plate is bent, cracked, or missing
• Direct-fit replacement built to match the original footprint

• Disconnect power at the breaker before servicing
• Wear cut-resistant gloves; metal edges can be sharp
• Support attached parts and transfer any brackets or hardware from the old plate
• Tighten fasteners evenly before restoring power

This is a genuine OEM replacement grease filter for use on cooktops. The air filter is used during cooking to filter smoke, grease, and other air contaminants from the air. When food is overheated, and smoke fills the kitchen, the air filter will pull the smoke from the air through the filter and out the exhaust. This helps to keep the air in the house odor and smoke-free. Odors can alter the way food tastes, so keeping the air and grease filter changed can help when serving food and how it is received. This filter also catches grease particles when cooking food in oil. These spatters will eventually clog the filter and necessitate the need to remove and replace it. If the filter is not removed, the air will not be able to circulate through it, and the filter will not work efficiently. Removal does not require tools. The filter is simply pulled out of the cavity and a new one placed in the cavity. The old filter should be discarded; this is not a filter that can be washed and reused. This filter is a black metal part that is sold individually. It is designed for stovetops and ranges manufactured by General Electric.

This grease filter is a genuine Bosch part, sold individually. This grease filter can be used as a replacement part for a range vent hood. This part prevents the accumulation and buildup of external grease in the internal aspects of the range vent hood. A grease filter can be subject to damage within the lifespan of a range vent hood. This damage can manifest in the form of punctures, scrapes, nicks, tears, and erosion to the material that can allow external grease to slip into the range vent hood and gunk up its inner workings. A grease filter might become damaged from general wear and tear or due to a collision with a hard object that warps the component beyond functionality. If this occurs, the grease filter should be removed and replaced with this genuine OEM replacement part. It is a simple replacement process that will require no special tools.This is an OEM part sourced directly from the manufacturer. It is sold individually. This grease filter is compatible with the following appliance brands: Bosch and Thermador.

This grease filter traps airborne grease and cooking particles before they reach the blower and ductwork. Replacing a saturated or damaged filter helps restore vent performance, reduce lingering odors and smoke, and protect the ventilation system from buildup.

• Captures grease and particulates from cooktop exhaust to keep the vent path cleaner
• Helps maintain proper airflow and smoke/steam capture
• Common replacement signs: weak suction, visible saturation, tears/warping, or sagging

• Disconnect power and allow the appliance and filter area to cool before starting
• Open the filter panel/grille; support the filter while releasing tabs or latches
• Note orientation and seating; install the new filter securely without bending it
• Do not operate the vent without a grease filter; test fan operation after installation

The Lamp Holder is an OEM part for Bosch range hoods. It secures interior lighting fixtures in place above the stovetop, managing connecting wires neatly out of the way. Proper holder positioning ensures consistent task illumination.

Causes of failure can include normal wear from sustained vibration in the kitchen environment. Periodic replacement preserves essential visibility above the cooktop.

Symptoms of a faulty lamp holder are:

• Interior hood light failing to illuminate or flickering inconsistently
• Visible damage or deterioration of mounting clips/anchors
• Loosening of lighting unit from repeated cleaning

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Mount, Vibration Rubber Range Hood is an OEM part for Bosch range hoods. It plays a crucial role in mounting the range hood itself and reducing noise and vibrations produced during operation. The rubber vibration mount is designed to absorb shocks and isolate noises, providing a smooth, quiet ventilation experience.  

Symptoms of a bad mount can include looseness or detachment of the range hood, increased vibration transfer to surrounding cabinetry, or failure of the rubber material itself.

Symptoms of a bad mount include:

• Noisy operation from the range hood that transfers to cabinets
• Visible vibration of the range hood body during ventilation  
• Eventual detachment or loosening of the range hood mount
• Reduced vibration damping translating to a rougher ventilation cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
 

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

This replacement motor restores reliable rotation to the component it powers, helping your appliance operate smoothly and as designed. Swap out a worn or seized motor to bring motion and performance back to normal.

• Supplies rotational power to the attached mechanism inside the appliance
• Common failure symptoms: no movement, humming without turning, grinding/squealing noises, or intermittent/slow operation
• A failed motor can lead to loss of function and unusual noise from the driven part
• Replacing the motor restores proper motion and helps maintain overall performance

• Disconnect power to the appliance before servicing
• Access the motor area; note wire locations and the motor's orientation before removal
• Transfer any brackets, grommets, or screws from the old motor as needed; beware of sharp edges
• After mounting, ensure the shaft/attached part spins freely and clear of obstructions before reassembly and testing

Replacement rocker switch that restores manual control of the range-hood fan or light, providing straightforward on/off operation. Use this switch to replace worn, stuck, or non-responsive controls for safer, more reliable operation. What it does

• Replaces a failed or damaged rocker-style on/off control so the fan or light will operate when switched.
• Use when the hood fan or light won't turn on, the switch feels loose or sticks, or the control works intermittently.
• Fits into the original switch location and connects to existing wiring/quick-disconnect terminals.
• Restores simple user control without replacing the entire hood control assembly.

• One rocker switch.

• Always disconnect power at the breaker before servicing electrical components.
• Turn off power, label or photo the wiring for reference, then remove the old switch and attach the replacement to matching terminals.
• Secure the switch and restore power; test fan and light operation.

Note: This filter is approximately 12" x 17". (Qty of one)

This Grease Filter is an OEM part for GE range hoods. As a key filtration component, this rectangular filter works to capture cooking emissions like grease, smoke and odors above the cooktop. It prevents these contaminants from recirculating back into the kitchen or home.

Causes of a bad filter can include excessive use over time, washing with improper cleaning solutions, or damage during removal/installation.

Symptoms of a bad filter include:

• Reduced airflow and suction from the range hood
• Grease or smoke escaping from the hood despite ventilation usage
• Unpleasant cooking smells lingering in the kitchen

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Switch Speed Control is an OEM component specifically designed for select Bosch downdraft ventilation hoods requiring variable ventilation levels. As an adjustable regulator, it modulates blower velocities responding to modes selected by end users. 

Causes requiring replacement involve cumulative use wearing down switching components through continuous cycles. Physical impacts risk separating connections or shorting protected circuitry.

Symptoms signaling the need for a new speed control switch include: 

• Inability to adjust air exchange rates matching different cooking methods
• Erratic transitions between programmed velocities disrupting performance  
• Failure to consistently apply expected power levels to blowers

This OEM Bosch replacement component is also compatible with Thermador, Gaggenau, and some Kenmore ventilation hoods employing adjustable exhaust capacities. Correct installation restores intended variable operational control.
 

This filter traps cooking grease and airborne particles as air moves through your appliance's ventilation system. It helps protect the blower and internal surfaces and supports proper airflow for effective venting during everyday cooking.

• Captures grease and debris from cooking vapors to reduce buildup on internal components
• Helps maintain ventilation airflow and fan performance
• Replace if the mesh is torn, warped, heavily clogged, or no longer stays seated
• Common symptoms include reduced airflow, lingering smoke or odors, and visible grease accumulation

• Disconnect power and allow surfaces to cool before servicing
• Access the filter from the underside of the hood or over-the-range unit
• Release retaining tabs or screws, remove the old filter, and slide the new filter into place
• Ensure the filter is fully seated and secured before restoring power