Refrigerator Dispenser Parts
Genuine Samsung part
By: Samsung
Part Number: DA66-00850A
The Refrigerator Dispenser Lever is designed to restore the functionality of your Samsung refrigerator's water or ice dispenser. This genuine OEM part ensures a perfect fit and reliable performance, maintaining the convenience you expect from your appliance. Crafted with durability in mind, the dispenser lever withstands daily use, providing smooth and consistent operation. Installing this lever is straightforward, allowing you to quickly get your refrigerator back to optimal working condition. By choosing the Refrigerator Dispenser Lever, you are ensuring compatibility with a range of Samsung refrigerator models, guaranteeing that your dispenser works seamlessly. Whether your original lever is broken, worn out, or missing, this genuine OEM part is the ideal solution to enhance your fridge's functionality and ensure a seamless user experience.
Do-It-Yourself Stories from Customers like You
Broken lever dispenser James W. • Kennesaw , GA • May 30, 2017
Once I found the hole for the spring arm to go in it took
1 min. Tip: make sure the spring is on the left side pin and, insert it
First to insure the spring aligns then use a screw driver to pry out the
Right side flange slightly to aide in inserting the right side pin into its hole
Read more
More
$27.77
- Compare At:
-
$33.05
- You Save:
-
$5.28
Genuine Samsung part
By: Samsung
Part Number: DA97-04952B
Replaces a cracked, broken, or missing water dispenser cover assembly on your refrigerator. Snaps into place over the dispenser area to restore appearance.
This part fixes the following symptoms
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
My samsung refrigerator's interior water dispenser stopped working Richard M. • Avalon , PA • July 21, 2015
I read an article concerning the same problem and ordered the interior lever, but the real issue was that the plastic piece that activated the water flow was broken off the interior of the water dispenser cover assembly. I popped out the dispenser cover (it is on very snugly) and replaced it with a new one (again, it went back on but with some force needed). I only needed a screwdriver to pop the cover and would suggest you use a towel as a buffer to prevent scratching the interior of the...
Read more
More
$50.43
- Compare At:
-
$60.52
- You Save:
-
$10.09
Genuine Ge part
By: Ge
Part Number: WR29X10109
Channels water from the fill tube into the icemaker mold. Replace if cracked, broken, or dislodged, causing water leakage or ice buildup in freezer.
Do-It-Yourself Stories from Customers like You
Ice jamming fill cup coming off Mark H. • Glendale , AZ • February 29, 2016
Replaced the stripper and fill cup - turns out that the fill cup came with the locking tab broken off. The stripper had a missing paddle, and ice cubes would jam and shut down the ice maker periodically.
Let the ice maker warm up after you remove it so the plastic is not so brittle. You have to pry the old stripper out. Make sure the new one locks all across the front. My refrigerator has the ice maker mount toe the side instead of from the hangers in back. I wasn't sure how to remove it,...
Read more
More
$10.95
- Compare At:
-
$13.03
- You Save:
-
$2.08
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10353848
Refrigerator dispenser pad installs on the control panel for water and ice operation. Replace if cracked, unresponsive, or causing erratic dispensing.
Do-It-Yourself Stories from Customers like You
Intermittent ice dispensing switch. Stan R. • Oceanside , CA • July 29, 2023
Order part and replaced switch.
Read more
More
$140.36
- Compare At:
-
$165.62
- You Save:
-
$25.26
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185234
The Pad is an OEM part for Whirlpool refrigerators. This part activates the dispensing mechanism for water and ice when pressed.
Causes of a bad pad can include repeated use leading to wear and tear, accumulation of dirt or debris, or damage from accidental impacts.
Symptoms of a pad include:
- No water or ice dispensing when the actuator is pressed
- The actuator feeling loose or unresponsive
- Intermittent or inconsistent dispensing
- Strange noises during activation
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Flapper for ice and water broke. Jack W. • Bandon , OR • December 02, 2017
Ordered new part, very easy to replace only took about 5 minutes to install new part and get everything going again. Part was a perfect fit and was shipped and received in only a few days. Thanks
Read more
More
$8.36
- Compare At:
-
$9.95
- You Save:
-
$1.59
Genuine Whirlpool part
By: Whirlpool
Part Number: 12001991
The Ice Door Fountain Kit is an OEM replacement part for Whirlpool refrigerators with built-in ice makers. It directs water to the ice molding trays and facilitates automated ice cube harvesting. Kit includes flapper, solenoid, strike arm, solenoid plunger, and instructions. Spring is not included. For the spring order 61004388.
Causes of a bad ice door fountain kit can include wear and tear over time, buildup of ice or debris obstructing the door mechanism, or damage to the components from frequent use.
Symptoms include:
- Incomplete ice cubes or low ice yield
- Drips or leaks in the ice maker area
- The ice drawer fails to eject cubes fully
This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.
This part fixes the following symptoms
-
Door sweating
-
Ice maker won't dispense ice
See more...
Do-It-Yourself Stories from Customers like You
The ice door would not close all the way and would allow air to go up to the ice storage compartment this would cause a frosty build up which interfered with getting ice to come down the shute Thomas C. • Iowa , LA • August 29, 2015
We ordered the Ice Door Fountain Kit and ice door spring, which was delivered to our home within three or four days. I understood everything about how to change it except the placement of the
spring. A video on your website showed exactly how to put the spring in place and helped me get the job done quickly. It solved our problem and we really appreciate your services.
Read more
More
$130.95
- Compare At:
-
$155.83
- You Save:
-
$24.88
Genuine Ge part
By: Ge
Part Number: WR17X20449
The Ice Dispenser Paddle Assembly is an OEM part for GE refrigerators. It is a component located inside the ice chute that guides ice cubes from the freezer bin out through the dispenser and into a glass below.
Symptoms of a bad paddle assembly include:
- Ice cubes remaining stuck in the chute and not dispensing
- Incomplete dispensing with ice falling back into the freezer
- Blockages or backups occurring in the ice dispenser tube
Causes of a bad paddle assembly can include broken or cracked paddles, mineral buildup inhibiting proper movement, or damage over time like worn-out bearings.
This part is also compatible with select Hotpoint, RCA, and Kenmore refrigerator models.
Do-It-Yourself Stories from Customers like You
Broken ice dispenser paddle. Kent R. • Fort Worth , TX • April 28, 2020
Extremely easy to fix, not sure why I delayed in getting this fixed!!
Read more
More
$29.30
- Compare At:
-
$34.87
- You Save:
-
$5.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WP12562701
The Ice Chute Door is an OEM replacement part for Whirlpool side-by-side refrigerators. It provides access to the dedicated ice and water storage and dispensing compartment located on the refrigerator door.
Causes of a faulty chute door can include normal wear from frequent use. Internal temperature fluctuations may cause durability issues over several years.
Symptoms of problems include:
- Failure to fully close or form a tight seal
- Difficulty dispensing ice or water due to door misalignment
- Premature cooling loss from unsealed opening
- Physical damage preventing proper closing
This OEM door is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore side-by-side refrigerators.
Do-It-Yourself Stories from Customers like You
Teeth broke off of ice chute door Deanna N. • Bay Saint Louis , MS • March 01, 2018
Replaced ice chute door by watching video.
Read more
More
$9.41
- Compare At:
-
$11.20
- You Save:
-
$1.79
Genuine Ge part
By: Ge
Part Number: WR17X12910
The Grill Recess is an OEM replacement part for GE refrigerators. It is located in the dispenser area, acting as a catch tray to collect drips and spills from the water or ice dispenser. This component helps keep the dispenser area clean and prevents water from dripping onto the floor or refrigerator surfaces.
Over time, the grill recess can become cracked, discolored, or damaged due to regular use and exposure to moisture. Replacing it ensures a clean appearance and continued functionality of the dispenser area.
Symptoms of a bad grill recess include:
- Cracks or visible damage to the tray
- Difficulty fitting the grill securely in place
- Water pooling or dripping from the dispenser area
- Discoloration or wear from prolonged use
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
Replacing of ice dispenser paddle, dispenser arm spring, and grill recess Duarte A. • Beacon Falls , CT • April 29, 2024
Followed the instructions in your video. The demonstration is well done and easy to follow.
Read more
More
$17.58
- Compare At:
-
$20.92
- You Save:
-
$3.34
Genuine Frigidaire part
By: Frigidaire
Part Number: 241682001
Replacement actuator lever for refrigerator water dispensers. Installs on the exterior door panel. Needed when the paddle is cracked, broken, or missing.
Do-It-Yourself Stories from Customers like You
I had a broken water actuator. Osvaldo P. • Piscataway , NJ • April 09, 2014
I watched a video on YouTube that walked me step by step through the repair.
Read more
More
$63.95
- Compare At:
-
$75.46
- You Save:
-
$11.51
Genuine Samsung part
By: Samsung
Part Number: DA97-08519A
The Refrigerator Dispenser Lever Assembly is an essential component for maintaining the functionality of your Samsung refrigerator's dispenser system. This genuine OEM part ensures a perfect fit and seamless operation, allowing you to easily access chilled water, ice, and other beverages. Crafted with durability in mind, the dispenser lever assembly is designed to withstand daily use, providing reliable performance over time. Installing this assembly is straightforward, making it an ideal choice for DIY repairs without the need for professional assistance. By replacing a faulty or worn-out dispenser lever with this high-quality genuine OEM part, you can restore the convenience and efficiency of your refrigerator's dispensing feature. Compatible with a wide range of Samsung refrigerator models, this dispenser lever assembly guarantees compatibility and ease of installation. Enhance your refrigerator's functionality and enjoy uninterrupted access to your favorite chilled items with the Refrigerator Dispenser Lever Assembly .
Do-It-Yourself Stories from Customers like You
The ice maker stopped dispensing ice found out that the little switch ingagement arm that is attached to the top back side of the ice dispensing paddle broke off and would not engage ice augar switch Andrew L. • New Bern , NC • May 06, 2015
Had to replace the (assembly lever dispenser; AW3) unit because the ice and water paddles could not be bought separately.
Hold the touch screen child lock icon for at least three seconds until the lock indicates a locked position, this will allow you to disassemble and reassemble the electrical connections on the old and new dispenser without having to unplug or turn power off to the frig.
Remove the one phillips screw located to the right of the dispensing paddles on the bottom of the...
Read more
More
$166.95
- Compare At:
-
$198.67
- You Save:
-
$31.72
Genuine Frigidaire part
By: Frigidaire
Part Number: 240563639
Controls ice and water dispensing from your refrigerator door. Replace if the module housing is cracked, broken, or if mechanical parts are worn or missing.
Do-It-Yourself Stories from Customers like You
Ice dispenser was broken. William H. • Frederick , MD • October 12, 2022
Replaced the broken dispenser with a new one.
Read more
More
$160.35
- Compare At:
-
$190.82
- You Save:
-
$30.47
Genuine Ge part
By: Ge
Part Number: WR17X12125
Replacement paddle for refrigerator ice dispenser. Press to activate ice release. Replace if cracked, broken, or won't spring back after pressing.
Do-It-Yourself Stories from Customers like You
The ice dispenser on my GE refrigerator would no longer activate the switch to dispense ice nor water James T. • Ft. Thomas , KY • November 18, 2018
I order both the paddle and spring and watched a video on how to remove the operating panel to replace them
Read more
More
$10.95
- Compare At:
-
$13.14
- You Save:
-
$2.19
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2255432W
White plastic lever that activates refrigerator water dispensing. Replaces stained, discolored, cracked, or loose levers on door dispenser assembly.
Do-It-Yourself Stories from Customers like You
Stained and etched dispenser paddles needed to be replaced Josh R. • Corpus Christi , TX • February 04, 2015
Once the parts arrived, I followed the help video that was emailed to me with my order confirmation step by step. Super useful! The video quality and editing were well done and the instructions were very specific. I felt like a pro!
Read more
More
$51.95
- Compare At:
-
$61.30
- You Save:
-
$9.35
Genuine Frigidaire part
By: Frigidaire
Part Number: 240563638
Dispenser module housing for refrigerator doors. Holds valve assemblies, switches, and tubing for ice and water delivery. Replace if cracked or broken.
Do-It-Yourself Stories from Customers like You
Ice dispenser flap was removed. Ronald P. • Boca Raton , FL • August 14, 2017
I ordered the new replacement housing and switched it out.
Read more
More
$160.32
- Compare At:
-
$189.18
- You Save:
-
$28.86
Genuine Whirlpool part
By: Whirlpool
Part Number: WP2255431W
White paddle that activates your refrigerator's ice dispenser. Replace if cracked, broken, stained, or worn to restore a clean appearance and smooth operation.
Do-It-Yourself Stories from Customers like You
Stained and etched dispenser paddles needed to be replaced Josh R. • Corpus Christi , TX • February 04, 2015
Once the parts arrived, I followed the help video that was emailed to me with my order confirmation step by step. Super useful! The video quality and editing were well done and the instructions were very specific. I felt like a pro!
Read more
More
$51.95
- Compare At:
-
$61.82
- You Save:
-
$9.87