Spray Arm & Related

This top spray arm, also called the top wash spinner, restores proper water distribution to the top of the tub. It helps deliver even spray coverage so glasses and dishes on the upper rack come out clean. What it does:

• Rotates under water pressure to spray jets across the upper rack area
• Improves wash coverage and rinsing for items on the top level
• Common failure signs: poor cleaning on the top rack, arm not spinning, clogged jets, or visible cracks/warping
• May also cause uneven spray patterns or debris buildup if the spinner is damaged

• 1 top spray arm

• Disconnect power at the breaker and turn off the water supply before servicing
• Open the door; remove the upper rack if needed for access
• Release the retainer or screw, remove the old spinner, and clear any debris from the hub/feed area
• Install the new spinner and ensure it spins freely before running a test cycle

Color: white. It measures about 20 inches wide by 14 inches high when fully extended.

This ring nut with gasket secures and seals a dishwasher connection point. If the nut cracks or the gasket hardens, leaks can develop—replace this part to restore a tight, reliable, watertight seal.

• Creates a watertight seal at a threaded dishwasher connection
• Secures the fitting/component so it stays tight during operation
• Helps correct leaks caused by a cracked nut or worn/flattened gasket
• Replace if the connection drips, the nut is stripped, or the gasket is brittle

• Disconnect power and turn off the water supply before servicing
• Place a towel or shallow pan to catch residual water
• Seat the gasket evenly and start the nut by hand to avoid cross-threading
• Snug the nut—do not overtighten. Run a short cycle and check for leaks

This side blaster assembly mounts to the dishwasher's tub wall and directs a focused spray into the wash cavity to help scour stuck-on residue. Replace if the nozzle is cracked, clogged, or leaking to restore proper cleaning performance.

• Provides targeted side-wall spray to supplement the main wash arms
• Helps flush debris and improve coverage along racks and corners
• Common failure signs: weak or no side spray, poor cleaning near the side wall, visible cracks, or leaks at the side jet
• Restores intended spray pattern and water distribution when the original is damaged or blocked

• Disconnect power and turn off the water supply before servicing
• Remove the lower rack to access the side blaster location
• Release the retainer/screw, disconnect the hose/tube, and install the new assembly; ensure the sealing surface is clean and properly seated
• Reconnect, secure, and run a test cycle to check for leaks and proper spray

Dishwasher lower wash arm and spray tower support.

The Dishwasher Middle Spray Arm is an essential component for maintaining the cleaning efficiency of your Samsung dishwasher. This genuine OEM part is specifically designed to ensure a perfect fit and seamless operation within your appliance. The middle spray arm plays a crucial role in distributing water evenly throughout the dishwasher, reaching all areas to effectively remove food residues and leave your dishes sparkling clean. Constructed from durable materials, the Middle Spray Arm is built to withstand regular use, providing long-lasting performance and reliability. Its easy installation process allows you to replace a damaged or worn spray arm without the need for professional assistance, saving you time and effort. By choosing this genuine OEM part, you can be confident in the compatibility and functionality with your Samsung dishwasher, ensuring optimal performance and extending the lifespan of your appliance. Enhance your dishwashing experience with the Dishwasher Middle Spray Arm , and enjoy consistently thorough cleaning results every time you run a cycle.

The Dishwasher Middle Spray Nozzle Assembly is essential for maintaining optimal cleaning performance in your dishwasher. This genuine OEM part ensures precise water distribution, allowing for thorough cleaning of your dishes and utensils. Designed specifically for Samsung dishwashers, it guarantees a perfect fit and seamless integration with your appliance. The durable construction of the Middle Spray Nozzle Assembly enhances the longevity of your dishwasher, reducing the need for frequent replacements. By restoring the functionality of your spray system, this part helps to eliminate stubborn food residues and ensures spotless results every wash cycle. Installing the genuine OEM part is straightforward, making it a convenient solution for DIY repairs. Compatible with a range of Samsung dishwasher models, this Middle Spray Nozzle Assembly provides reliable performance and supports the overall efficiency of your appliance. Choose this genuine OEM part to maintain the high standards of your Samsung dishwasher and enjoy consistently clean and fresh dishes with every use.

The Dishwasher Lower Nozzle Assembly is essential for maintaining efficient water circulation in your dishwasher. This genuine OEM part is crafted to seamlessly integrate with a variety of Samsung dishwasher models, ensuring a perfect fit and dependable performance. By replacing a worn or damaged lower nozzle assembly with this high-quality component, you can restore optimal water spray patterns, enhancing the cleaning power of your appliance. This results in spotless dishes and a more effective wash cycle, saving you time and effort. The Dishwasher Lower Nozzle Assembly is designed for easy installation, allowing you to quickly get your dishwasher back to peak functionality without the need for professional assistance. Investing in this genuine OEM part not only prolongs the life of your dishwasher but also ensures that it operates smoothly and efficiently. Trust in the reliability and precision of this genuine OEM part to deliver consistent and thorough cleaning performance every time you run your dishwasher.

Tall item spray head.
This Spray Head is an OEM part for Bosch Dishwashers. It plays a role in distributing water evenly during the dishwasher's washing cycles. Continuous exposure to hard water, debris, or mineral deposits can cause issues with this component.

What Causes a Bad Spray Head:
Hard water deposits, debris, or mineral buildup can clog or block the spray head, affecting its performance. Physical damage can also impair its functionality.

Symptoms of a Bad Spray Head:

• Inadequate cleaning of dishes
• Uneven water distribution
• Reduced water pressure during washing cycles

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
 

This spray arm assembly distributes high-pressure wash water inside the dishwasher and spins to cover the racks. Replacing a cracked or clogged arm restores proper spray coverage for cleaner dishes and consistent wash performance. What it does:

• Rotates as water flows to spray dishes evenly across the tub
• Channels water from the circulation pump through precision jets
• Helps resolve poor cleaning results or spots left on dishes
• Addresses issues like a spray arm that won't spin, clogged nozzles, or visible damage

• 1 spray arm assembly

• Disconnect power at the breaker and turn off the water supply before servicing
• Remove the rack if needed to access the arm
• Release the locking tabs or unthread the retaining cap to remove the old arm
• Seat the new arm fully, secure the retainer, and confirm it spins freely before a test cycle

This conduit assembly carries wash water from the pump to the dishwasher's tiered spray system for consistent rack coverage. Replace a damaged or clogged conduit to restore spray performance and minimize leaks or spray loss inside the tub.

• Channels water to the upper/tiered spray jets for proper coverage
• Helps maintain correct flow and spray pressure to the upper wash system
• Common symptoms: poor cleaning on the upper rack, weak/no spray from upper jets, or leaks/spray from the rear conduit area
• Visible cracks, warping, or broken tabs can prevent a tight, leak-free seal

• Disconnect power and shut off the water supply before servicing
• Remove racks as needed; release interior screws/tabs to detach the conduit and note original orientation
• Seat all connections and seals fully to prevent leaks; secure mounting points
• Run a short test cycle and check for leaks and proper spray action

Lower wash arm redirects pressurized water across the dishwasher's lower rack to rinse and remove food and residue, restoring intended wash coverage and improving cleaning performance. What it does:

• Directs jets of water through multiple spray holes to rinse dishes on the lower rack.
• Helps remove stuck-on food, film and spotting on plates, bowls and cookware.
• Replaces cracked, clogged or broken lower spray arms that can cause poor cleaning or leftover residue.
• Works with the dishwasher's pump flow to maintain proper spray pattern across the lower rack.

• Refer to your model's parts diagram and instructions; the arm commonly snaps or threads onto the lower spray arm mount and procedures vary by model.
• Always disconnect power to the dishwasher before servicing; follow basic safety precautions.
• Clean the filter and any debris from spray holes before installing to avoid re-clogging.
• Inspect the mounting clip or retaining nut when removing the old arm and replace if damaged.

This hub mounts on the pump outlet to secure and center the dishwasher's lower spray arm, allowing smooth rotation and even water distribution for consistent cleaning on the bottom rack.

• Anchors the lower spray arm to the pump/sump assembly
• Provides the pivot point so the arm spins freely
• Helps channel wash water into the spray arm
• Typical symptoms: arm not spinning, poor cleaning on the lower rack, wobbling/falling arm, scraping or grinding at the hub

• Disconnect power and water supply before servicing
• Remove the lower rack; lift off the spray arm and any retainer/screw if present
• Remove the old support from the pump outlet; seat the new support fully; reinstall the spray arm and fastener
• Verify the arm spins freely and clears obstructions; run a short test cycle to check operation

Upper spray arm with heatseal that restores water distribution to the dishwasher's upper rack for improved cleaning and rinsing. Replace a worn, cracked, clogged, or leaking upper spray arm to recover normal spray coverage. What it does:

• Directs pressurized spray to the upper rack so dishes and glassware rinse and wash more effectively; use when cleaning is inconsistent.
• Replaces cracked, bent, or clogged spray arm that no longer spins or sprays evenly.
• Includes a heatseal to help maintain a proper seal at the mounting area and prevent dripping or loss of water pressure.
• Helps eliminate symptoms like poor cleaning, visible water pooling, or uneven rinse patterns.

• Always disconnect power to the dishwasher (unplug or switch off the circuit breaker) before servicing.
• Empty and remove the upper rack to access the spray arm; inspect the mounting area and rotor for debris before installing.
• Installation is typically straightforward; confirm the attachment method for your model and use only OEM-recommended orientation.
• After installation, run a short cycle to check for leaks.

The Dishwasher Nozzle Top Assembly for DW80F800UWS, DW80F60 is designed to restore optimal spray performance in your Samsung dishwasher. This genuine OEM part ensures that water is evenly distributed throughout the dishwasher, providing a thorough and efficient clean for your dishes. Crafted with high-quality materials, the nozzle top assembly is built to withstand regular use, maintaining consistent performance over time. Its precise engineering guarantees a perfect fit for compatible Samsung models, making installation straightforward and hassle-free. By replacing a worn or damaged nozzle top assembly with this genuine OEM part, you can extend the life of your dishwasher and avoid the expense of purchasing a new appliance. Enhanced water distribution not only improves cleaning results but also contributes to the overall efficiency of your dishwasher, potentially lowering water and energy consumption. Trust in the reliability of this genuine OEM Dishwasher Nozzle Top Assembly to keep your Samsung dishwasher functioning smoothly, ensuring that your kitchen remains spotless and your dishes come out sparkling clean every cycle.

Also considered middle sprayarm on some dishwashers having a rinse arm on the ceiling.