Spray Arm & Related

This cap secures the dishwasher wash arm to its support, helping keep the arm properly positioned so water jets can spin and spray effectively for consistent cleaning performance.

• Holds the wash arm in place on its hub/support
• Can help address a loose, wobbly, or detached wash arm
• Replacing a damaged or missing cap can restore stable arm rotation

• Disconnect power and turn off water before service
• Remove the lower rack for access; lift off the wash arm
• Unscrew/press off the old cap; seat and secure the new cap
• Ensure the wash arm spins freely by hand before reassembly

Color: light gray. Each prong goes out about 10 inches from the center.

The Wash Arm Bearing is an OEM replacement part for Frigidaire dishwashers. It is a crucial component that supports and facilitates the smooth rotation of the wash arm during the dishwashing cycle. The wash arm is responsible for spraying water and distributing detergent solution evenly throughout the dishwasher tub, ensuring thorough cleaning of dishes.

Causes of a bad wash arm bearing include wear and tear over time, exposure to debris or hard water buildup, or physical damage due to impact or mishandling. A faulty bearing can lead to issues with the wash arm's rotation and water distribution.

Symptoms of a bad wash arm bearing include:

• Excessive noise or grinding sounds during the wash cycle
• The wash arm not rotating or spinning properly
• Uneven or incomplete cleaning of dishes
• Water not being distributed evenly within the dishwasher tub

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore dishwasher models.

This nozzle assembly directs high-pressure wash water through its jets for even cleaning inside the dishwasher. Replacing it restores consistent spray coverage and wash performance. What it does:

• Distributes wash water through spray jets during wash and rinse cycles
• Uses water pressure to rotate and reach all rack areas
• Replaces broken, warped, or clogged nozzles that restrict flow
• Common symptoms include poor cleaning results, spray arm not spinning, unusual noise, or leaks at the spray hub

• 1 nozzle assembly

• Disconnect power and water supply before servicing
• Pull out the rack as needed; release the locking tab or nut to remove the old nozzle
• Inspect and transfer any O-rings/gaskets if present; seat the new assembly fully for a leak-free seal
• Run a short test cycle to check for leaks

Includes one sprayarm.

The Dishwasher Spray Nozzle Middle Assembly is designed to restore optimal spray performance in your Samsung dishwasher. This genuine OEM part ensures a perfect fit and reliable functionality, maintaining the efficiency of your appliance. Crafted with high-quality materials, the nozzle middle assembly delivers consistent water flow, enhancing the cleaning power for spotless dishes every cycle. Easy to install, it allows you to quickly replace a worn or damaged nozzle without the need for professional assistance. Compatible with various Samsung dishwasher models, this assembly supports the precise distribution of water, helping to eliminate stubborn food particles and ensuring thorough cleaning. By choosing this genuine OEM part, you can trust in the durability and performance that Samsung appliances are known for. Improve your dishwasherGÇÖs effectiveness and extend its lifespan with the Dishwasher Spray Nozzle Middle Assembly , providing a seamless and efficient solution for your appliance repair needs.

This adapter plate is a molded interface in the wash system that secures and seals components so water pressure is routed correctly. Replacing a cracked or warped plate helps stop leaks and restore proper spray performance.

• Connects and supports wash-system components at the sump/water-feed interface
• Maintains a reliable seal to help prevent leaks
• Helps direct wash water to the spray arms for effective cleaning
• Replace if cracked, warped, or stripped; symptoms can include leaks, weak spray, or a loose spray arm

• Disconnect power and water supply before servicing
• Remove the lower rack and related wash components to access the plate; note the order of parts for reassembly
• Reuse existing seals and fasteners in their original positions; seat the plate evenly and tighten hardware snugly, not overtight
• Run a brief test cycle and inspect for leaks before full use

This dispenser water tube routes water from the inlet to the refrigerator's in-door dispenser manifold, helping ensure a steady, leak-free flow to the dispenser.

• Directs water from the supply line to the dispenser manifold
• A damaged or cracked tube can cause leaks, low/erratic dispenser flow, or air in the water line
• Replacing a leaking tube can help restore normal dispenser operation and prevent water damage

• Unplug refrigerator and shut off water supply before service
• Have a towel/container ready to catch residual water
• Note tube routing and connections; push-to-connect fittings may require firm seating for a watertight seal
• After installation, turn water on and check all joints for leaks

The Top Spray Arm is an OEM part for Whirlpool dishwashers. It serves an important role on the upper rack, directing a spray of water across dishes during the wash cycle to thoroughly clean all surfaces. As a rotating component, the top spray arm endures constant motion which can cause wear over time.

Causes of a bad top spray arm include deterioration or cracks in the plastic from extended use, or blockages that restrict water flow.

Symptoms of a bad top spray arm include:

• Incomplete cleaning of upper rack dishes
• Buildup of food debris or grime that won't rinse away
• Noticeably weaker spray pattern from the arm nozzles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement part is a lower arm spray, and it is intended for use in different types of appliances. This is a genuine replacement part made by General Electric. The lower arm sprays are an important part of the cleaning process in many dishwashers. This spray arm is situated underneath the top dish rack and projects water downward for more sufficient cleaning.A new lower spray arm might be needed if the user notices the current one is failing to spin or expel water. If dishes are coming out of the dishwasher and are only partially cleaned, then it might be time for a new arm spray. Be sure the water is completely turned off from the appliance before attempting to repair this part. Refer to the user guide for more specific directions on how to replace the lower arm spray. This lower arm spray is sold individually and is sourced directly from the manufacturer. This dispenser is a genuine OEM part.

The Dishwasher Nozzle Assembly is an essential component designed to ensure optimal performance of your dishwasher. This genuine OEM part guarantees a perfect fit and reliable functionality, maintaining the efficiency of your appliance. Crafted with high-quality materials, the nozzle assembly effectively directs water flow, enhancing the cleaning power of your dishwasher and ensuring spotless dishes every cycle. Installing this part helps prevent leaks and maintains proper water distribution, contributing to the longevity of your dishwasher. Compatible with a wide range of Samsung dishwasher models, the Dishwasher Nozzle Assembly offers a seamless replacement solution for worn or damaged nozzles. By choosing this genuine OEM part, you can trust in its durability and precise engineering, making it a practical choice for restoring your dishwasherGÇÖs performance. Whether you're addressing minor issues or performing routine maintenance, this nozzle assembly provides the reliability and efficiency needed to keep your kitchen running smoothly.

The Upper Spray Arm Support is an OEM replacement part for GE dishwashers. It is installed within the dishwasher tub below the upper spray arm, and is responsible for securely mounting and holding the upper spray arm in place during operation.

Symptoms of a bad upper spray arm support include:

• Vibration or noise from an unsecured spray arm
• Improper alignment of water spray pattern  
•  Restricted rotation of the spray arm during washing
• Leaks at the tub connection point

Causes of a bad spray arm support can be from cracks or breaks that compromise its structure, or wear over extended use without replacement. 

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement upper spray arm restores strong spray coverage to the upper wash level of your dishwasher. It channels water through its jets and spins under pressure to help deliver consistently clean dishes on the top rack.

• Directs pressurized wash water to the upper wash level for thorough cleaning
• Rotates under water pressure for even spray coverage
• Helps clear food soils and detergent residue from dishes and glasses
• Common symptoms: poor cleaning on the upper rack, spray arm not spinning, clogged or cracked arm

• Disconnect power and shut off the water supply before servicing
• Open the dishwasher; remove the upper rack if needed for access
• Release or unthread the retainer and pull the old arm straight off; clear debris from the hub/feed port
• Seat the new arm and secure the retainer hand-tight; ensure the arm spins freely and run a test cycle

This mount secures the dishwasher's upper spray arm to its water feed, keeping the arm aligned and free to rotate so the upper rack receives consistent spray coverage and dependable cleaning.

• Supports and centers the upper spray arm at the correct connection point
• Helps maintain a solid connection to the feed tube/manifold for proper water delivery
• Wear, cracks, or looseness may lead to poor cleaning on the upper rack, arm wobble, or noise
• Replacing a damaged mount can help restore smooth spray arm rotation and wash performance

• Disconnect power and turn off water supply before servicing
• Pull out the upper rack; remove the upper spray arm from its mount
• Release the old mount's locking tabs or fasteners and remove it from the feed tube/tub
• Install the new mount fully, reattach the spray arm, and verify it spins freely before testing

The Dishwasher Upper Nozzle Holder is an essential component for maintaining your dishwasher's optimal performance. This genuine OEM part ensures a secure fit within your Samsung dishwasher, providing reliable support for the upper spray nozzles. Designed specifically for Samsung dishwasher models, it guarantees compatibility and seamless integration with your appliance. By securely holding the upper nozzles in place, this holder helps maintain consistent water flow, enhancing the cleaning efficiency of each wash cycle. Made from durable materials, it withstands the rigors of regular dishwasher use, ensuring long-lasting functionality. Installing the Dishwasher Upper Nozzle Holder is straightforward, allowing you to quickly restore your dishwasher's performance without the need for professional assistance. Whether you're replacing a damaged holder or upgrading your dishwasher parts, this genuine OEM part offers the quality and reliability you expect from Samsung. Improve your dishwasher's effectiveness and extend its lifespan with this reliable upper nozzle holder, ensuring your dishes come out sparkling clean every time.

This is a replacement upper tower rack. This is a genuine OEM part made by General Electric and has been sourced directly from the manufacturer. This part is intended to replace a defective, cracked, or broken upper tower rack on various models of dishwasher. The upper tower rack fits onto the upper rack of the dishwasher and helps to ensure that the upper spray arm functions properly and that dishes come out clean. Over time and with regular use, the upper tower rack may become cracked or damaged and will require replacement. For safety purposes, always ensure the dishwasher is completely unplugged from power and water before attempting this repair. Be sure to follow appropriate safety precautions when attempting to repair any appliances. For more accurate information on how and where to install this upper tower rack the appropriate owner's manual and included diagrams should be referenced.As an authentic replacement part, this upper tower rack is suitable for use on several different models of dishwasher manufactured by General Electric, Hotpoint, and other GE brands. This is a genuine part made of high-quality, durable plastic and is sold as an individual part.