Washer Dryer Combo Hose Or Tube

This external drain hose routes water from the appliance drain to the house drain or drip pan, helping prevent leaks and water buildup. It replaces a worn or damaged external drain line for proper draining. What it does

• Channels wastewater away from the appliance to the designated drain or pan.
• Restores proper drainage when the original hose is cracked, split, or clogged.
• Helps stop water pooling under or around the appliance.
• Supports normal defrost/drain cycles by providing an unobstructed path.

• Disconnect power (and water, if applicable) before beginning work.
• Inspect hose routing and secure with clamps; avoid sharp bends or kinks that restrict flow.
• Replace any worn clamps or seals; tighten clamps to prevent leaks without crushing the hose.
• After installation, run a short cycle or pour water through the drain to check for leaks.

This pressure-sensing hose connects the washer's water-level pressure switch to the tub, allowing the appliance to detect and control fill levels. Replacing a cracked or clogged hose restores reliable water-level sensing and cycle performance. What it does:

• Carries air pressure between the tub and the pressure switch so the control can detect water level
• Prevents overfill or underfill when intact and unobstructed
• A cracked, split, or blocked hose can cause improper filling, repeated fill/drain cycles, or error codes related to water level
• Simple, passive component—no electrical connections

• One pressure-sensing hose

• Disconnect power and turn off water supply before servicing
• Inspect and clear any blockages or lint before installing the new hose
• Ensure hose is routed without kinks and secured with the original clamps or retainer clips

This replacement hose drain routes wastewater from the appliance to the household drain, restoring proper drainage and helping prevent leaks caused by cracked or clogged tubing. Use it to replace a worn or damaged drain hose. What it does:

• Carries wastewater from the appliance to the drain connection
• Restores normal draining when the original hose is cracked, split, or blocked
• Reduces the chance of leaks or water pooling near the appliance
• Helps eliminate odors caused by standing water in a damaged hose

• Turn off power and water supply to the appliance before replacing the hose
• Disconnect the old hose at both ends, note routing and clamp locations, then install the new hose in the same position
• Use appropriate clamps or fittings to secure each end and check for leaks after reconnecting power and water