Washer Knob, Dial & Button

The Timer Knob is an OEM part for Whirlpool washers and dryers. It is located on the control panel that allows you to set and adjust the timer for different wash and dry cycles.

A bad timer knob can be caused by regular use, accidental damage, or wear and tear over time. If you notice cracks, a loose fit, or difficulty in turning the knob, it may indicate a problem with the knob itself.

Symptoms of a bad timer knob include:

• Cracked or damaged knob surface
• Loose or wobbly fit of the knob on the control panel
• Inability to set or adjust the timer accurately

Replace your faulty timer knob with this genuine OEM part to restore your appliance. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Knob is an OEM part for Whirlpool washers and dryers. This control knob allows users to select various settings and cycles for the appliance, providing precise control over washing and drying operations. 

Causes of a bad knob can include regular wear and tear, accidental impacts, or exposure to moisture and heat.

Symptoms of a bad knob include:

• Knob not turning smoothly or becoming stuck
• Cracks or breaks in the knob
• The knob slipping or not staying securely on the control shaft
• Difficulty selecting or changing cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dryer Timer Knob is an OEM replacement part for Whirlpool dryers. It allows users to set the drying time and cycle, providing control over the dryer's operation. This knob fits securely onto the timer shaft, and it allows for the selection of the desired drying cycle and time.

Color: White with Blue Trim

Cap Sold Separately

Over time, wear and tear, excessive force when turning, or accidental impact can cause the timer knob to crack, loosen, or lose its grip on the timer shaft. This makes it difficult to select and maintain accurate drying cycles.

Symptoms of a faulty Dryer Timer Knob include:

• Difficulty turning the knob to select the desired cycle
• Knob slipping or turning loosely
• Cracks, breaks, or missing parts

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer Knob is an OEM part for Whirlpool washers. This knob allows users to set and adjust the washing cycle by turning the timer to the desired position. 

Causes of a bad timer knob can include regular wear and tear, accidental impacts, or over-tightening.

Symptoms of a bad timer knob include:

• Knob not turning smoothly or becoming stuck
• Cracks or breaks in the knob
• The knob slipping or not staying securely on the timer shaft
• Difficulty setting or changing the washing cycle

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This dial assembly is the labeled control ring used on a washer's control panel. It restores clear cycle selection and secure indexing when the original dial becomes cracked, stripped, or unreadable.

• Provides the printed cycle/setting indicators and aligns with the knob for accurate selection
• Replaces a damaged or missing dial that wobbles, slips, or no longer shows settings
• Helps ensure your chosen cycle is indicated correctly on the panel
• Typical symptoms include a loose dial face, misaligned pointer, or difficulty selecting a cycle

• Disconnect power to the washer before servicing
• Pull the control knob straight off; remove any retaining clip if present
• Release the old dial's locking tabs and lift it away from the panel
• Align the new dial and press to lock in place; reinstall knob (and clip, if used)

This button tree is the group of selector buttons behind the control panel. It restores reliable button action so you can choose cycles and options when keys stick, feel mushy, or stop responding.

• Provides the push-button interface for cycle and option selections on the control panel
• Helps address unresponsive or intermittent keys
• Resolves sticking or jammed buttons
• Restores proper alignment and tactile feel

• Disconnect power to the appliance before servicing
• Remove the console/control panel to access the button tree
• Seat the new button tree so each button aligns with the control board switch positions and the overlay
• Handle the user interface board and wiring gently; do not force clips or tabs

Color: almond. Measures about 2 inches in diameter.

Color: white. Measures about 1-1/2 inches in diameter.

This timer knob assembly restores smooth, accurate cycle selection on your top-load washer. Replace a cracked or stripped knob to regain positive control of the timer without slipping or forcing the shaft.

• Attaches to the timer stem so you can select wash cycles and start the washer
• Replaces a knob that is cracked, stripped, loose, or missing
• Helps when the timer won't turn properly with the knob or the knob won't stay on
• Restores positive engagement with the timer for consistent operation

What's included: 1 timer knob assembly Installation notes:

• Disconnect power before servicing
• Pull the old knob straight off; some models use a small retaining clip
• Align the new knob with the timer stem and press firmly until fully seated
• Do not force the timer shaft; inspect for damage if the knob won't seat

Color: Chrome

This washer timer knob attaches to the timer shaft so you can select cycles and start the machine. Replace a cracked, stripped, or missing knob to restore positive engagement and reliable cycle selection.

• Engages the timer shaft to choose wash cycles and settings
• Restores proper feel and control when turning the timer
• Common symptoms: knob cracked or missing, spins without moving the timer, difficult to start or select a cycle
• If the timer can be turned with pliers but not with the knob, the knob is likely worn

• Unplug the washer before servicing
• Pull off the old knob; retain any cap or spring clip from the original if present
• Align the new knob with the timer shaft and press firmly until fully seated
• Rotate through settings to ensure solid engagement

Restore easy, precise cycle selection with this washer control knob. The rubberized knob replaces a cracked or stripped original so you can securely grip and turn the selector without slipping or wobbling.

• Replaces the washer's main control/selector knob
• Rubberized surface improves grip and control
• Mounts on the D-shaped control shaft to turn the timer/control
• Common symptoms: knob cracked, loose or spinning freely, missing, can't change cycles

• Disconnect power before servicing the appliance
• Pull the old knob straight off; avoid prying against the control panel
• Align the flat on the new knob with the shaft and press until fully seated
• The knob engages the shaft and rotates the control smoothly

Color: Blue. For gray order WP8181859.

Front load washer control knob. Color: Pewter. For gray order WP8181859. For Biscuit order WP8182049. For blue order WP8181881.

This replacement control knob restores smooth, reliable turning on your appliance's control panel so you can select settings accurately again. It's designed to slide onto the control shaft and provide a secure, easy-grip interface. What it does

• Attaches to the control shaft to let you select settings
• Replaces cracked, stripped, or missing knobs
• Helps ensure the switch or valve engages properly when turned
• Improves grip and appearance on the front panel

• 1 control knob

• Disconnect power; if servicing a gas appliance, also shut off the gas supply
• Pull the old knob straight off the shaft—do not pry against the panel
• Align the new knob with the shaft flats/splines and press straight on without forcing
• Test operation to ensure the knob fully engages the control

This control knob assembly replaces a worn or broken knob on your washer's control panel, restoring positive engagement with the control shaft so you can accurately select cycles and settings without slipping, wobbling, or misalignment.

• Attaches to the control shaft to select wash cycles and options
• Provides a secure grip and pointer alignment for accurate settings
• Restores proper feel to the dial and prevents free-spinning

• Disconnect power to the washer before servicing
• Pull the old knob straight off the shaft; if tight, gently pry while supporting the panel
• If a spring clip or insert is present on the old knob, transfer it to the new knob
• Align the flat/D-shaped hub with the shaft and press firmly until fully seated; verify pointer alignment