Washer Knob, Dial & Button

The Knob Assembly is an OEM component specifically designed for Speed Queen dryers. This assembly includes the control knob and integrated electronic components that allow for cycle and setting selection.

Causes of a defective knob assembly include normal wear of constantly rotated buttons, sun damage to exposed plastic knobs, and general use degradation of sealed electronic sensors over time. 

Symptoms of a bad knob assembly include:

• Knobs or buttons that do not select cycles properly   
• Faulty digital displays for time and settings
• Erroneous buzzers or error messages
• Unresponsive or stuck control functions

This OEM Speed Queen part is also compatible with products from American Dryer Corporation. Replacing the entire knob assembly restores full functionality to reliably control cycles on your dryer. Proper maintenance ensures long-term durability.
 

The Knob is an OEM part for GE dryers. This component allows you to select various dryer settings and cycles by turning the control mechanism. It ensures that users can easily adjust and operate the dryer according to their laundry needs.

Causes of a bad knob can include wear and tear from frequent use, accidental damage from dropping or mishandling, or internal cracking and splitting that compromise its functionality.

Symptoms of a bad Knob include:

• Knob not turning or slipping
• Difficulty selecting dryer settings
• The knob becoming loose or falling off
• The dryer not responding to setting changes

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Knob is an OEM replacement part for Whirlpool dryers. This part is what you turn to select different drying cycles, temperatures, or settings on your machine. The knob is designed to fit onto the dryer's control panel and is used for manual operation of the appliance.

Symptoms of a bad Knob include:

• Difficulty in turning or setting the knob
• The knob slipping or coming off the control panel
• Inability to select or change cycles
• Visible cracks or damage to the knob itself
• Causes for a deteriorating knob can be frequent use, which may lead to wear and tear, or accidental damage from impact or mishandling.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM replacement part for Whirlpool washers and dryers. The control knob lets you control cycle settings. Remove the knob by pulling it straight off its post.

Causes of a bad knob can include wear and tear over time resulting in loose or unstable function, cracks or chips in the plastic housing, or damage due to impact or abuse during removal from the post.

Symptoms of a bad knob include:

• Difficulty rotating or selecting settings
• Settings that do not stay in place after selection
• Cracked or broken knob housing
• Knob constantly moving out of the desired setting

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and some Kenmore models.

The Control Knob is an OEM part for GE washing machines, crafted to seamlessly integrate with your appliance. This knob allows users to select and adjust various settings, ensuring precise control over the washing machine's operations.  

Signs that you might need to replace the Control Knob include it becoming loose, unresponsive, or breaking off, which can occur with age or from accidental damage.  

Symptoms of a bad Control Knob include:

• The knob not engaging with the machine's settings, leading to difficulty in selecting wash cycles.
• A loose or wobbly knob that does not securely fit onto the washing machine.
• Visible cracks or damage that prevent the knob from functioning correctly.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dial Assembly is an OEM part for GE washing machines. This component is used to select different wash cycles and settings on the control panel. It provides users with a tactile interface to customize their laundry experience according to their needs.

Common causes of a bad dial assembly include frequent use leading to wear and tear, physical damage from accidental impacts, or internal mechanical failure.

Symptoms of a bad dial assembly include:

• Difficulty in turning the dial
• The dial not staying in the selected position
• Unresponsive or erratic cycle selection
• Visible cracks or damage to the dial

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer Dial is an OEM part for GE washing machines. This dial allows you to set and adjust the cycle times for various washing functions, ensuring your clothes receive the proper cleaning.

Over time, the Timer Dial can become worn out or damaged. Causes of a bad timer dial include regular wear and tear, cracking or breaking from excessive force, or the internal mechanism becoming stripped or misaligned, leading to difficulty in setting the wash cycles correctly.

Symptoms of a bad Timer Dial include:

•  Difficulty turning the dial
• The dial not staying in the set position
• Inaccurate cycle timing
• The washing machine not starting or stopping properly

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This control knob assembly is the user interface for the timer/cycle selector on your washer. Replacing a cracked or stripped knob restores a secure grip and positive engagement so you can confidently choose wash cycles and settings. What it does:

• Attaches to the timer/cycle selector shaft to let you turn and set cycles
• Transfers rotation to the control without slipping when intact
• Helps maintain proper pointer alignment for accurate setting selection
• Common symptoms: knob cracked, loose, spins freely, falls off, or can't select/start cycles

• Includes: 1 control knob assembly

• Disconnect power before servicing
• Pull the old knob straight off the shaft; do not pry against the console
• Align the flat(s)/D-shape on the shaft with the knob insert and press until fully seated
• If your model uses a retaining clip, ensure it's properly positioned in the knob before installation

The Timer Knob Assembly is an OEM replacement part for Frigidaire electric dryers. This assembly incorporates the timer dial, stem, and mounting components that allow users to set desired drying periods.

Causes of a faulty timer knob include wear and tear of internal gears from regular cycle selections. Damage to the outer dial or stem connection points may also occur.

Symptoms include: 

• Inability to rotate timer dial through full drying options   
• Timer selections not initiating or maintaining set programs
• Dial detaching from the front panel during adjustment

This OEM Frigidaire replacement part is compatible with Electrolux, Gibson, and various Kenmore dryer models as well.

This is a control knob for washing machines. This control knob is used to adjust the water temperature and level settings on the unit. It is manufactured out of a white plastic. The replacement is very easy and takes less than 15 minutes to complete. All that this process involves is pulling the old knob off and sliding the new knob on.A new control knob will be needed if the original is cracked, broken, or damaged in any way. Over time, the white plastic may begin to yellow, and the user may wish to replace the control knob for cosmetic purposes. If the knob is not actuating the desired cycle, it will need to be replaced.This control knob is a genuine SpeedQueen part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific control knob is compatible with washing machines that are manufactured by the SpeedQueen brand.

The Rotary Knob is an OEM replacement part for GE or Hotpoint washing machines. It provides the interface for selecting wash cycles and adjusting settings like temperature and spin speed.

Causes of a bad rotary knob include cracking, peeling, or damage to labeling from repeated use over time. The internal mechanisms can also wear out, preventing proper rotation.

Symptoms of a bad rotary knob are:

• Difficulty turning or clicking into set positions
• Loose, wobbly, or disconnected feel during use
• Faded or missing labels make settings unclear

It is also compatible with RCA, Westinghouse, Tappan, and some Kenmore models.

The Washer Control Knob is an OEM replacement part for Whirlpool washers.

Causes of malfunctions include stripped interior gears losing secure connection to circuit boards over hundreds of wash cycles. Repeated twisting motions can also crack fragile exterior ring structures.

Symptoms consist of:

• Refusal to rotate between settings
• Missing or faded graphics impairing readability
• Inability to start or stop washer cycles as needed

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

Color: Light gray used on platinum models. Measures about 1-2/3 inches in diameter. For blue order WP8181881. For dark gray used on pewter models order WP8182050.

The Timer Knob Insert is an OEM replacement part for Whirlpool dryers. This is a cap located on the timer knob on the control panel. Color: White. This is the timer knob cap only. For the complete assembly, you must also order the knob and skirt.

Causes of timer knob Insert failure can include cracked plastic from years of repeated turning motions. Wear on components also occurs due to extensive lifetime usage cycles.

Symptoms of a faulty timer knob insert include:

• Knob becomes loose, detached or inoperable for timings scrolling
• Cracks appear exposing internal timer parts

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

The Knob is an OEM part for Whirlpool washers. This part allows users to select and control the various wash cycles and settings by turning the knob to the desired position. It fits securely onto the washer's control shaft, providing an intuitive and reliable interface for managing the washing machine's functions.

Causes of a bad knob can include regular wear and tear, damage from repeated use, or breakage due to accidental impact. 

Symptoms of a bad knob include:

• The knob not turning smoothly or becoming difficult to turn
• The knob slipping off or not staying securely on the control shaft
• Inaccurate or unresponsive cycle and setting adjustments
• Visible cracks, breaks, or wear on the knob

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Timer Knob is an OEM part for Whirlpool washing machines. It enables users to select and adjust the various wash cycles and settings, ensuring proper control over the washer’s functions.

Causes of a bad timer knob can include wear and tear from regular use, cracking or breaking from frequent handling, or damage due to accidental impacts.

Symptoms of a bad timer knob include:

• Difficulty turning the knob or selecting cycles
• The knob feeling loose or not staying in place
• The washer not starting or cycling properly
• The knob appearing cracked or damaged

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Push Button is an OEM part for Whirlpool Laundry Centers. This part starts the wash or dry process, and making adjustments to settings. The push button is engineered for durability and a precise fit, ensuring it integrates seamlessly with the appliance's control panel.

Causes of a malfunctioning push button can include repeated use leading to wear and tear, accumulation of lint or detergent residue affecting its functionality, or damage to the button's contacts or the control panel circuitry. 

Symptoms of a bad Push Button include:

• Difficulty in engaging the desired cycle or setting
• The button feeling stuck or failing to return to its original position after being pressed
• The appliance not responding to button presses, resulting in an inability to start or modify cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.