Cap, Lid & Cover

This part is a shield that is used on lawnmowers and lawn tractors. It is manufactured out of a high-quality and durable metal. The purpose of the shield is to protect the engine from any flying debris. This component is held in place by two bolts.A new shield may be needed if the current one is cracked, broken, bent, or damaged in any way. If the shield experiences an impact collision with a hard object, it could become damaged. A socket set may be needed during the replacement of the shield. Make sure the outdoor power equipment machine is cooled off prior to attempting to work on it. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment machines.This shield is a genuine Husqvarna part. It is sold individually. This particular shield is compatible with lawnmowers and lawn tractors that are manufactured by Husqvarna.

This is a leaf blower starter cover assembly that is part of the starter system. The part is responsible for keeping the starter pulley sitting on the motor. It protects the pulley and prevents debris from reaching the internal part of the leaf blower. If dirt and dust get into the starter, it can cause damage and create the need for expensive repairs. The starter cover assembly is made of strong components but can experience wear or impacts that cause damage.If the starter cover assembly is damaged or missing, it should be replaced. Turn off the leaf blower and make sure it has had time to cool down. Disconnect the spark plug wire so the leaf blower cannot power on. A screwdriver will be needed to remove the original starter cover assembly from the leaf blower. Save the screws and use them to install the replacement part. Reassemble, replace the spark plug, and use as normal.The starter cover assembly is used in leaf blowers manufactured by Husqvarna and Craftsman. This is an authentic OEM component that is priced on an individual basis. It is directly sourced from the manufacturer.

Replacement oil cap for chainsaw oil tank. Seals the oil reservoir to prevent leaks and keep debris out. Order when original cap is cracked or lost.

Replacement fuel cap for hedge trimmers and leaf blowers. Seals the fuel tank to prevent gasoline leaks. Replace if cracked, broken, or worn threads.

This is a standard fuel cap for a hedge trimmer, chainsaw, or weed eater. The fuel cap assembly goes into the tank then screws onto the top of the fuel tank. A fuel cap keeps dirt and debris from falling into the fuel tank and gunking up the engine, causing it to misfire or corrode. Fuel cap assemblies are made of plastic, so they can dry out and snap. If the rubber seal on the fuel cap assembly is no longer preventing fuel from leaking, it’s time to replace it. Installing a new fuel cap assembly is simple. Just push the stopper in and screw on the lid. This is a genuine OEM product shipped from Husqvarna, the manufacturer of this part. This part is also compatible with Craftsman and Poulan products. Part sold individually.

Replacement fuel cap assembly for gas leaf blowers and trimmers. Seals the fuel tank to prevent leaks and evaporation. Order when cap is cracked or missing.

Replacement fuel tank cap assembly for gas blowers and trimmers. Includes retainer connection. Replace if your cap is cracked, won't seal properly, or missing.

Protective gear cap for riding mowers and lawn tractors. Shields internal gears from debris and damage. Replace if cracked, broken, or missing.

Replacement fuel cap assembly for riding mowers and tractors. Seals the fuel tank to prevent leaks and contamination. Order when original cap is cracked or missing.

This replacement part is a dust wheel. This is a genuine replacement part made by MTD. This part is used to help prevent wheels from becoming too dusty or dirty when not in use. A new dust wheel might be needed if the current on is missing or damaged. If the dust wheel is torn or unable to close properly, it might be time to replace it. This is a fairy simple repair as the user should be able to slip the dust wheel on over the current wheels. Be sure to purchase the correct amount as these are sold individually. Refer to the user manual for more instructions on how to replace this specific part. This part is sold individually and is sourced directly from the manufacturer. This part is also a genuine OEM replacement part to ensure proper fit.

Covers and protects the wheel hub on chipper shredders and outdoor equipment. Replace if cracked, missing, or damaged to restore appearance and prevent debris entry.

This part is a replacement air cleaner assembly. This is a genuine OEM part made by MTD and has been sourced directly from the manufacturer. This part is intended for use as a replacement for a broken, worn, or defective air cleaner assembly on various models of blowers. This air cleaner assembly includes the base, cover, and the foam air filter itself. This part helps to make sure that dirt, debris, and contaminants are filtered out of the air as it enters the engine so it doesn't have a negative effect on the equipment. Air filters should be cleaned regularly and replaced when worn or old. Wear work gloves to protect the hands and check that equipment is powered off and cooled down before starting the repair process. For more accurate information on how and where to install this air filter assembly, the appropriate owner's manual and equipment diagrams should be referenced. This air filter assembly is a genuine OEM part made of durable materials and is sold individually. It is suitable for use with blower models that have been manufactured by MTD and Craftsman.

This genuine OEM air filter assembly is a complete unit that aids in filtering the air that comes into the engine while the trimmer is in use. The plastic housing protects a foam filter that catches dust and debris. Over time, air filters become clogged with regular use and are usually replaced as a part of routine maintenance. In the event that the air cover or base becomes damaged, however, a replacement of the entire assembly may be needed. This part can do the job for compatible machines. This OEM air filter assembly is manufactured by MTD and meets exact standards for original equipment manufacturing. It is compatible with many trimmers from MTD and Craftsman. The replacement of the air filter assembly requires a screwdriver to remove the mounting screws of the old base and secure the new unit in place. Be sure to allow the engine to cool completely before doing any repairs. Since air filters are known to clog, it may be a good idea to purchase an extra one to have on hand in case of emergencies. This is sold as an individual unit and includes the foam filter along with the plastic housing.

Air cleaner assembly cover for gas line trimmers. Protects the air filter from debris and damage. Replace if cracked, broken, or missing to maintain proper filtration.

Replace your cracked or damaged push mower engine shroud. This plastic cover protects the engine from debris and impacts. Essential when original is broken.