Need Help?
Call or text
This replacement part is a cable assembly. This is a genuine replacement part made by Husqvarna. Cable assemblies are typically found in lawnmowers and help connect certain parts inside the machine so that they are able to work together efficiently during use. A new cable assembly might be needed if the current ones are stripped or damaged. This can be due to normal wear and tear. The wires can become damaged after years of normal use, and if this is the case, they should be replaced. Be sure to wear work gloves as working with cables can be dangerous. It is also recommended that the power be completely off before replacing this part.This is a genuine OEM replacement part. This cable assembly is sold individually and is sourced directly from the manufacturer to ensure proper fit and long-lasting use.
Usually ships within 4 - 14 days
This clutch cable is part of the clutch assembly that controls the drivetrain in a tiller. When the clutch is engaged, the cable works with a spring to draw the clutch plate away from the flywheel. When the clutch plate is moved from the flywheel, forward movement occurs. Disengaging the clutch stops the forward motion. Normal wear and tear can cause the metal parts of the cable to rust or corrode. This replacement part is simple to install and requires very little time.A screwdriver, scissors, and wrench are needed to remove and install the new clutch cable. Empty the fuel tank and remove the spark plug before working on the clutch cable. Remove the gas tank. Locate the end of the clutch cable inside the clutch lever bracket. Pull the cable out and remove the spring attached to the end. Install the new cable, retracing the steps used to remove the old cable.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This clutch cable is designed to be compatible with tillers manufactured by Craftsman.
Control cable for gas and grass line trimmers. Connects handle controls to transmission. Replace if cable is frayed, broken, or binding during operation.
Drive control cable for walk-behind mowers. Connects handle controls to drive system. Replace if cable is frayed, broken, or no longer engages drive.
Control cable for gas walk-behind mowers. Connects handlebar lever to engine start/stop mechanism. Replace if cable is frayed, broken, or stretched.
Throttle control cable for gas line trimmers. Connects the throttle trigger to the engine carburetor. Replace if cable is frayed, kinked, or broken.
This engine zone control cable is a genuine Husqvarna replacement part for lawn mowers. The function of a lawn mower's engine zone control cable is to turn off the engine and preventing it from continuing to run when the lawn mower's handle is not actively being held. An engine zone control cable might have to be replaced if it suffers damage over time; it is relatively commonplace that an engine zone control cable will suffer damage from overuse, long-term use, or exposure to the elements. These cables can stretch, lengthen, and eventually tear; if there is visible damage to the control cable, it should be replaced immediately. Additionally, if the engine is continuing to run when the handle of the lawn mower is not being actively held, a replacement engine zone control cable part should be ordered and secured to mitigate any possible further damage to the lawn mower. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This engine zone control cable is compatible with the following lawn mower brands: Husqvarna and Craftsman.
Control cable assembly connects the bail control lever to the engine on walk-behind mowers. Replace if cable is frayed, broken, or detached.
Drive control cable for walk behind lawn mowers. Connects the drive control lever to the transmission. Replace if cable is frayed, broken, or stretched.
Throttle control cable for lawn tractors and tillers. Connects throttle lever to engine carburetor. Replace if cable is frayed, broken, or stuck.
Throttle control cable for gas leaf blowers and line trimmers. Replaces worn, frayed, or broken cables that prevent proper throttle operation.
Control cable for edgers. Connects the handle controls to the engine or blade mechanism. Replace if cable is frayed, broken, stretched, or disconnected.
Drive clutch cable that engages the drive belt to turn snowblower wheels. Replace if cable is frayed, stretched, or won't engage properly.
Clutch control cable for gas snowblowers. Connects the clutch lever to the drive mechanism. Replace if cable is frayed, stretched, broken, or detached.
Replacement drive control cable for gas walk-behind mowers. Connects handle lever to transmission. Replace if frayed, broken, or detached for restored control.
This part is a height adjustment cable that is used on lawnmowers. The height adjustment cable allows the lawnmower operator to adjust the height of the control bar to match his or her height.A new height adjustment cable will be needed if the original is no longer allowing the operator to adjust the height. If any portion of the height adjustment cable is cracked, broken, or damaged in any way, it will need to be replaced if the height of the control bar needs to be changed. Remember to wear gloves when operating or performing care and maintenance on any outdoor power equipment. Never perform care and maintenance on outdoor power equipment that is powered on.This height adjustment cable is a genuine MTD part. It is sold individually. This particular height adjustment cable is compatible with lawnmowers that are manufactured by MTD.