Control Cable

This part is a replacement zone control cable. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. This part can be used to replace a broken or defective zone control cable in a variety of lawnmower models. The zone control cable is critical to the safety and proper functionality of the lawn mower, as it enables the user to power off the engine when the handle is released. Cables can become stretched, snapped, worn, or otherwise defective over time, and thus should be replaced. It's important when working on or near any engine to make sure the equipment is powered off and completely cooled down before starting any repairs. For more accurate information on how and where to install this zone control cable, the appropriate owner's manual and equipment diagrams should be referred to. As an authentic replacement part, this zone control cable is suitable for use on several different models of lawnmowers manufactured by Husqvarna, Craftsman, Poulan and other brands. Please This is a genuine part made of high-quality, durable materials and is sold individually.

Control cable for gas walk-behind mowers. Connects handlebar controls to engine or drive mechanism. Replace if cable is frayed, broken, or worn.

Replacement throttle control cable assembly for gas line trimmers. Installs between trigger and engine. Needed when cable is frayed, broken, or kinked.

Control cable wire harness assembly for grass line trimmers. Replaces damaged, frayed, or broken wiring harnesses. Essential for restoring connections.

This is a lever set assembly that is used with many types of leaf blowers for use in the yard and garden. It is located near the throttle cable on the equipment. The purpose of a lever set assembly is to engage the throttle cable. This causes the carburetor to open so that additional air and fuel will be sent into the cylinder. This is a durable assembly that has many parts. If the wires or other components are damaged, the lever set assembly will need to be replaced.A socket set and screwdriver will be needed to replace the lever set assembly on a leaf blower. Take the leaf blower and put it on a level surface after making sure it is powered off. To prevent any chance of the engine coming on, the spark plug wire should be disconnected. Remove the nuts holding the lever set in so it can be taken out. Replace with the new component.This is a genuine OEM replacement part that is directly sourced from the manufacturer. It is sold as an individual part. The lever set assembly is made to be used with several leaf blowers made by Husqvarna.

This is a blade brake/clutch control cable that is a part of many lawnmowers and lawn tractors. The purpose of the control cable is to ensure the motor stops when the user removes their hands. It is located near the handle and made of plastic and wires. The main reason the control cable would need to be replaced is if the blades on the lawn equipment do not stop when the handlebar isn't being grasped.Several tools are needed to replace this part, including pliers, a socket wrench, a snap ring, a screwdriver, and scissors. When making the replacement, put the lawnmower on a level surface and power it off. The spark plug wire should be disconnected to prevent the engine from powering on. To replace the part, the plastic deck guard and blade will need to be removed. This gives access to the pulley connection where the control cable is located.The blade brake/clutch control cable is designed to be compatible with lawnmowers and lawn tractors manufactured by Husqvarna. It is an authentic OEM replacement part that is sourced directly from the manufacturer. The part is sold on an individual basis.

Drive control cable for walk-behind lawn mowers. Connects handle controls to transmission drive system. Replace if cable is frayed, stretched, or broken.

This transmission control cable is made for riding lawn mowers and garden tractors. It is the cable that engages the gear case to drive the equipment. Over time, it may wear out or become damaged, eventually requiring a replacement. Check the drive control cable when the lawn mower won't move or moves forward slower than usual, because the drive cable can stretch over time. The user won't be able to move the drive lever if the cable is too corroded to slide inside its sheath. If the cable is cut, the mower will not move. Replace the control cable if it's damaged or cut.Replacing the transmission control cable will require a selection of hand tools, including a screwdriver, ratchet, and sockets. Owner's should wear gloves when working on their lawn tractor, and always follow the owner's manual instructions.This transmission control cable is compatible with Husqvarna-branded lawn tractors. This replacement will also fit other Husqvarna produced brands, like AYP, Craftsman, Jonsered, McCulloch, Poulan, Poulan Pro, RedMax, Weed Eater. This is an OEM part and is sold individually.

Cable housing for walk behind lawn mower control cables. Replace if cracked, frayed, or damaged. Protects internal cable during operation.

This is a control cable that connects the drive engagement handle to the self-propel transmission on a walk-behind lawn mower. It transfers the lever action to engage or disengage the drive system. Replace this cable if the mower no longer self-propels, the drive is sluggish, or the cable is frayed, stretched, or broken.

This clutch cable is part of the clutch assembly that controls the drivetrain in a tiller. When the clutch is engaged, the cable works with a spring to draw the clutch plate away from the flywheel. When the clutch plate is moved from the flywheel, forward movement occurs. Disengaging the clutch stops the forward motion. Normal wear and tear can cause the metal parts of the cable to rust or corrode. This replacement part is simple to install and requires very little time.A screwdriver, scissors, and wrench are needed to remove and install the new clutch cable. Empty the fuel tank and remove the spark plug before working on the clutch cable. Remove the gas tank. Locate the end of the clutch cable inside the clutch lever bracket. Pull the cable out and remove the spring attached to the end. Install the new cable, retracing the steps used to remove the old cable.This is a genuine OEM replacement part sourced directly from the manufacturer. It is sold as an individual part. This clutch cable is designed to be compatible with tillers manufactured by Craftsman.

Mechanical clutch cable for riding mowers with lever-operated transmissions. Replace if cable is frayed, stretched, broken, or no longer engages smoothly.

Control cable for gas and grass line trimmers. Connects handle controls to transmission. Replace if cable is frayed, broken, or binding during operation.

Drive control cable for walk-behind mowers. Connects handle controls to drive system. Replace if cable is frayed, broken, or no longer engages drive.

Control cable for gas walk-behind mowers. Connects handlebar lever to engine start/stop mechanism. Replace if cable is frayed, broken, or stretched.

Throttle control cable for gas line trimmers. Connects the throttle trigger to the engine carburetor. Replace if cable is frayed, kinked, or broken.