Need Help?
Call
Burner won't heat or heats unevenly? This radiant surface element mounts under your glass cooktop to restore consistent heating. DIY-friendly repair.
I took some part numbers from the underneath side of the burner along with the stove model number and entered them on the internet and luckily found the part that I was looking for - I purchased it and it was delivered very quickly (faster than I expected). I took pictures of the burner before taking it apart and then removed the broken burner and replaced it with the new burner, put all the other parts back together and it worked perfectly the first time I turned it on. I feel like a real pro... Read more
Burner won't heat or only works on one setting? This surface heating element restores even heat to your cooktop. Simple plug-in replacement.
Ordered a new one from appliance pro got it fast and put it in work's great. Read more
Restore reliable, even heat to a single cooking zone with this surface heating element. It replaces a failed top burner element on an electric range or cooktop so pots and pans heat consistently for everyday cooking. What it does:
What's included:
Install notes:
Ordered new element from AppliancePartsPros.com. It came faster than I expected (two days). I saved $35 over buying it locally and they would of had to order it too. Read more
Burner not heating or heating unevenly? This 8-inch surface element restores reliable cooktop performance. Simple plug-in installation in minutes.
REPLACED NEW RIGHT FRONT POWER BURNER. THIS DID NOT FIX THE PROBLEM. I THEN REPLACED THE BURNER CONNECTING SWITCH BY FOLLOWING THE INSTRUCTIONS ON YOUR VIDEO. BURNER HEATS UP NORMALLY, BUT I DON'T KNOW YET IF IT WILL SUDDENLY GO TO THE HIGH SETTING. IT WAS A SPORADIC PROBLEM I WAS HAVING...SO I'M HOPING THIS SOLVES THE ISSUE. FINGERS ARE CROSSED....BUT IN EITHER CASE....I NEEDED A NEW BURNER. REPAIR WAS SIMPLE....THE INSTRUCTIONAL VIDEO WAS VERY EASY TO FOLLOW. Read more
Range burner not heating? This 8-inch surface element restores even heating to your cooktop. Simple plug-in replacement takes under 10 minutes with no tools.
I unplugged the old, plugged in the new, and started cooking. Read more
Fix a cooktop burner heating only on inner or outer ring, or not heating at all. This dual radiant element restores both heating zones. DIY repair.
I replaced the burner. The cook top had an exhaust fan attached which made the repair much harder. I know now you can remove the exhaust fan and duct from the bottom which would have saved me a lot of time. Read more
This replacement heating element restores consistent, reliable heat so your appliance reaches and maintains temperature as designed. A worn or open element can lead to long heat-up times or a complete loss of heat. What it does
The part was easy to install. Just plugged into the same holes. Wire feet attached to the bottom to keep it off the floor of the oven. It works great! Read more
Replace a failed 8-inch radiant surface element when your burner won't heat. Restores proper heating response. DIY-friendly with basic tools.
Replaced with new one Read more
Range not broiling or browning food evenly? A failed broil element is the likely cause. This radiant heating coil restores strong, even heat for searing.
Replaced with new ones ordered from your company Read more
Broil element won't heat or glow? This oven broil element restores intense top heat for browning and broiling. Easy DIY repair with two screws.
I watched a few video's online to see how others had fixed it, then I tried to do research on the element part number. Appliance Parts Pro's were very helpful. I had to submit my model number off the stove/oven and a very helpful Customer service rep named Dannette from APP sent my pictures to their research dept. The first try was not an exact match since my oven is much older, but upon a little more research on the internet by me, I determined the correct replacement part number. Dannette... Read more
Burner won't heat or heats unevenly? This 6-inch surface element restores consistent heating. Straightforward repair with minimal tools required.
Quick fix with parts from AppliancePartsPros.com. Very fast delivery. Read more
Bake element provides the oven's lower heating source so food cooks and browns properly; replacing a faulty element restores normal bake performance and addresses no-heat or uneven baking issues. What it does:
Searched the internet for a replacement and ordered it from APP and it arrived quickly. Removed three screws holding the original heating element in and disconnected the spade connectors and pulled out the old element. The spade connectors were a bit loose, so I tightened them up with a pair of pliers and re-installed the new element. Oven works great now. This is an old Frigidaire Wall Oven from the early 70's, so we were fortunate to be able to repair instead of having to replace. Read more
Oven won't heat or maintain temperature? A failed bake element causes uneven cooking and long preheat times. This lower heating element restores consistent heat.
Bake element def. replaced with new and now works great. Read more
Burner won't heat or stays on high? This dual radiant surface element restores proper heating. DIY-friendly repair—lift cooktop, disconnect wires.
Googled "How to fix Whirlpool flat surface element"? Up came a YouTube video of how to remove screws and lift top to remove part and order a new one. It was important to know the Model number and as soon as I had that it took a few minutes to google a parts replacement site. This site was very quick and easy and I had the part in 2 days and installed in just a few minutes. Read more
Replace a dual radiant element that won't heat, heats unevenly, or stays on when turned off. Compatible with many glass cooktops. Video guide included.
Majority of the time was removing and prepping the radiant cooktop with the protection tape and foam tape. Used the ordered replacement parts. Turns out that the old dual radiant element was cracked in multiple places and was truly functional. So ended up replacing it. The culprit was the switch. I had a previous one I had ordered years ago that I never used and replaced it. Viola, everything works. Read more
Broiler won't heat or oven won't preheat? A failed broil element is often the cause. This repair restores top heating and typically takes 30 minutes.
Did it myself Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.