Crosley Washer Parts

Best Seller

Genuine Whirlpool part

Crosley Drain Pump

By: Whirlpool

Part Number: WPW10661045

The Washer Pump Assembly, Drain, is an OEM part for Whirlpool washing machines. This component is essential for removing water from the washer tub during the drain cycle, ensuring that clothes are properly rinsed and spun dry.

Common causes of a bad drain pump include blockages from lint, debris, or foreign objects, wear and tear from regular use, and electrical issues such as a burned-out motor. These problems can prevent the pump from effectively draining water.

Symptoms of a bad drain pump assembly include:

Washer not draining properly or at all
Unusual noises during the drain cycle
Water left in the washer after the cycle completes
Error codes related to drainage issues

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Drain pump did not work Lowell P. • North Bergen , NJ • July 09, 2017

Installed new pump Read more

$51.30

Compare At:: $61.05
You Save:: $9.75

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Female Dryer Door Catch

5.0 (8)

By: Whirlpool

Part Number: WP3389441

The Female Dryer Door Catch is an OEM part for Whirlpool dryers. It secures the dryer door in the closed position during operation, ensuring that the door remains firmly shut while the dryer is running. This catch works with the male door strike to provide a reliable latching mechanism.

Common causes of a bad door catch include repeated use leading to wear and tear, physical damage, or misalignment. A faulty door catch can prevent the dryer from operating correctly and may pose a safety hazard.

Symptoms of a bad female dryer door catch include:

The dryer door not staying closed
The dryer not starting due to the door not latching properly
Difficulty in opening or closing the dryer door
Visible damage to the door catch

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Door won't close

Do-It-Yourself Stories from Customers like You Dryer door would not stay closed without being taped shut Marceen W. • La Canada , CA • June 10, 2016

I chatted with a rep on Appliance Parts Pros and found out which parts I needed for my model of dryer. Ordered the 2 clips that held the door closed. They arrived the next day!! My dryer was very different than the video but we were able to figure out which screws to remove. The old clips popped out and the new ones popped in. Took about 30 minutes because of there being a top and bottom clip to remove and replace and line up the door parts to screw the screws back in. It works great!! I... Read more

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Belt And Isolator Kit

4.7 (44)

By: Whirlpool

Part Number: 12001788

The Belt and Isolator Kit is an OEM part for Whirlpool washing machines. This kit includes a drive belt and isolators that work together to transfer motion from the motor to the washer drum while dampening vibrations.

Over time, the belt can wear out, stretch, or break due to regular use, heavy loads, or friction. The isolators may also deteriorate, losing their ability to absorb shocks effectively.

Symptoms of a bad Belt and Isolator Kit include:

The drum not spinning or agitating
Excessive vibration or noise during operation
The washer failing to start or complete cycles

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not agitate
Spins slowly
Burning smell
Pumps but will not spin

Do-It-Yourself Stories from Customers like You Noisy spin cycle Gregory E. • Halifax , PA • April 17, 2017

I just wanted to put my experience here for all to see. I have a Maytag Neptune, MAH5500BWW, one of the original ones. I bought it back in 2002 and it has done many many loads of wash faithfully. So when the bearings started to get loud I thought it best to replace them, the seal kit and the belt. I did my research as best I could and decided to order the OEM parts from an appliance supplier. If you are replacing the bearings, watch on line videos prior to performing the job. It will... Read more

$28.95

Compare At:: $34.45
You Save:: $5.50

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Appliance Spray Paint

4.9 (35)

By: Whirlpool

Part Number: 350930

Color: White. Size: 13 oz can. Acrylic appliance aerosol can spray paint.

The Appliance Spray Paint is an OEM part for Whirlpool appliances, designed to provide a quick and effective way to touch up or completely refinish the exterior of various appliances. This specialty spray paint is formulated to adhere to metal surfaces, offering a durable and resistant finish that can withstand the routine wear and tear of kitchen environments, including heat, moisture, and everyday use.

The primary reason for using such a specialized paint is to maintain or restore the aesthetic appeal of your appliances while protecting them from further damage.

Symptoms needing for Appliance Spray Paint include:

Scratches, chips, or rust spots on the appliance's exterior that can lead to further damage or corrosion if left untreated
A desire to refresh or update the appearance of the appliance without the need for complete replacement
Discoloration or fading of the original finish due to age, exposure to sunlight, or cleaning agents

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Leaking diaphragm Herbert S. • Monroe Township , NJ • January 03, 2015

Replaced It With New One Read more

$24.95

Compare At:: $29.94
You Save:: $4.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Vacuum Break Inlet Hose

5.0 (29)

By: Whirlpool

Part Number: WP3357328

The Vacuum Break Inlet Hose is an OEM part for Whirlpool washing machines. This hose is designed to prevent backflow of water into the washer, ensuring that water flows in the correct direction during the wash cycle. It plays a crucial role in maintaining the efficiency and hygiene of the washing process.

Common causes of a bad hose include regular wear and tear, exposure to harsh detergents, or accidental punctures. A compromised hose can lead to water flow issues and potentially contaminate the wash water.

Symptoms of a bad vacuum break inlet hose include:

Water leakage around the hose area
The washer not filling properly
Backflow of water into the washer
Reduced water pressure during the wash cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018

First off I have to say that Appliance Parts Pro's saved me from hiring a repair person, and quite possibly just getting rid of my washing machine. Their video's helped out SOOOOOOOO much and the advice one of their agents gave me over their online chat helped me trouble shoot something when I got stuck. On top of this they shipped my parts fast enough that less than 12 hrs later they arrived, which allowed me to get my machine up and running way faster than the other options I had available.... Read more

$18.95

Compare At:: $22.55
You Save:: $3.60

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Agitator

4.9 (19)

By: Whirlpool

Part Number: W10836692

The Agitator is an OEM replacement part for Whirlpool top-loading washing machines. Situated vertically at the center of the wash basket, this post facilitates rotation and cyclonic movement of clothes during cycles.

Causes of an impaired agitator include cracking at mounting points allowing excessive wobble or detachment from the central drive shaft over multiple years of use. Mineral buildup can also scale components making smooth operation difficult.

Symptoms involve:

Uneven wetting and inadequate oscillations leave clothes soiled
Excessive vibrations and noise from an off-center agitator
Inability to properly distribute detergent throughout the load

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

Do-It-Yourself Stories from Customers like You Clothes washer agitator broke off Nicole L. • Sacramento , CA • May 29, 2018

Viewed YouTube video of AppliancePartsPros.com replacing the agitator to see if I could do it myself. I ordered part from Sears but they never delivered. Cancelled order with Sears, ordered from APP and was sent part within 24hrs by fedex for less than Sears charged. Will only go APP and would recommend APP to everyone. Using the video I easily replaced the part and our washer is back in business! Thank you APP!!!!! Read more

$77.95

Compare At:: $93.54
You Save:: $15.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Appliance Touchup Paint

4.9 (33)

By: Whirlpool

Part Number: 72017

The Appliance Touchup Paint is an OEM product for Whirlpool appliances. This touchup paint is used to cover scratches, chips, and minor blemishes on the surface of various appliances, helping to maintain their appearance and protect them from rust and other damage. It is specifically formulated to match the original color and finish of Whirlpool appliances, ensuring a seamless repair.

Causes of needing touchup paint include everyday wear and tear, accidental impacts that cause chipping or scratching, and exposure to harsh cleaning chemicals that can damage the finish. Regular use of touchup paint can help keep appliances looking new and extend their lifespan.

Symptoms indicating the need for Appliance Touchup Paint include:

Visible scratches or chips on the appliance surface
Areas of exposed metal prone to rust
Blemishes that affect the overall aesthetic of the appliance

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Chipped paint Thomas S. • Middletown , DE • September 03, 2014

Touch up paint Read more

$12.55

Compare At:: $15.06
You Save:: $2.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Door Strike

5.0 (10)

By: Whirlpool

Part Number: WPW10488048

The Door Strike is an OEM part for Whirlpool washing machines. This component engages with the door latch to securely close the washing machine door. Ensuring a tight seal, the door strike plays a pivotal role in the appliance's safety mechanisms, preventing the washer from operating if the door is not properly shut.

Causes for replacement often stem from physical damage, such as breaking or bending due to forceful closing of the door, normal wear and tear, or manufacturing defects that prevent the door from latching correctly.

Symptoms of a bad Door Strike include:

The washing machine door won't latch or lock properly.
The washer fails to start due to the door not being recognized as closed.
Visible damage or wear to the strike, indicating it may not engage correctly with the latch.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You My son slammed the door to the washer closed and broke the striker latch Vernon S. • Harbor City , CA • June 02, 2014

Ordered the striker latch, it arrieved in two days, I removed the two screws holding the broken latch and installed the new latch, then put the two screws back in. Wam Bam, it was fixed, it was easy. Read more

$10.43

Compare At:: $12.41
You Save:: $1.98

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Front Leveling Foot

4.9 (19)

By: Whirlpool

Part Number: WPW10001130

The Front Leveling Foot is an OEM part for Whirlpool washing machines. It is designed to support and stabilize the washer by allowing users to adjust the height and level the appliance on uneven floors. Proper leveling ensures smooth operation and minimizes vibrations and noise during wash cycles.

Causes of a bad Front Leveling Foot can include physical damage from excessive force, wear and tear from frequent adjustments, or corrosion due to exposure to water or laundry chemicals. Over time, these factors can compromise the foot’s ability to maintain stability, leading to operational issues.

Symptoms of a bad Front Leveling Foot include:

The washing machine rocking or wobbling during operation
Increased vibration and noise
The washer being unlevel, affecting wash performance
Difficulty in adjusting the foot

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You It would act like its out of balance on the spin cycle even with no water or clothes in it no one had the answer even local repair people untill i found a youtube on out balance on spin cycle Carl W. • Glendale , AZ • June 27, 2015

REPLACING THE SUSPENSION PADS AND REPLACE THE BALNCE RING EVEN IF MY DIDN'T LEAK ANY FLUID OUT OF IT... IT SOLVE THE PROBLEM, IT WORKS BETTER NOW THAN IT EVER DID, THE ONLY THING I COULD COME WITH IS THE MANUFACTURE PUT THE WRONG BALANCE RING IN IT TO START WITH... MY IS A 400 KENMORE TOP LOADER, IT IS THE EASIES WASHER I HAVE EVER TAKEN A PART.. I WISH CARS WERE THAT EASY... IT TOOK ME OVER A MONTH FIGHTEN THIS PROBLEM UNTIL I FOUND IT ON YOUTUBE... WHAT BLESSING IT WAS... Read more

$6.95

Compare At:: $8.20
You Save:: $1.25

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Lid Hinge

4.9 (69)

By: Whirlpool

Part Number: WP35-2044

The Lid Hinge is an OEM part for Whirlpool washers. It is responsible for supporting and allowing the smooth opening and closing of the washer lid. Fits the female end of the washer lid hinge. For the male end order WP35-2045 and if you're unable to use the old mounting screw, order WP25-7893.

A bad Lid Hinge can occur due to regular use, wear and tear, or accidental damage. If the hinge becomes loose, bent, or broken, it can compromise the function and safety of the washer lid.

Symptoms of a bad Lid Hinge include:

Lid not staying open or falling shut unexpectedly.
Difficulty in opening or closing the lid.
Visible damage or deformation of the hinge.
Excessive movement or wobbling of the lid.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Lid or door will not open
Lid or door won't close

Do-It-Yourself Stories from Customers like You Broken door hinge James F. • Brownwood , TX • April 01, 2014

The greatest thing about Appliance Parts Pros is that when I ordered the part, I watched the 2 minute video on how replace it. When the part arrived, the next day by the way, I simply did as the video did. I love this site! I've repaired my washer and dryer and saved so much money simply by watching these videos and ordering the part. Customer service is amazing as well. They have always given me the correct information and I've never had to wait longer than a couple of minutes for... Read more

$12.53

Compare At:: $15.04
You Save:: $2.51

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Hose Clamp

5.0 (24)

By: Whirlpool

Part Number: WP596669

The Hose Clamp is an OEM part for Whirlpool appliances. It secures hoses in place, ensuring a tight connection and preventing leaks in various systems such as washing machines, dishwashers, and refrigerators. This clamp is crucial for maintaining the integrity of the water or air lines it secures.

Causes of a bad hose clamp include wear and tear over time, exposure to water and detergents, or mechanical stress from repeated tightening and loosening.

Symptoms of a bad hose clamp include:

Leaks at the hose connection points
Hoses slipping off the connections
Visible rust or damage on the clamp
Reduced appliance efficiency due to leaks

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not stop filling with water
Leaking

Do-It-Yourself Stories from Customers like You My washing machine smelt horrible Bryan W. • Ogdensburg , NY • August 20, 2018

$7.95

Compare At:: $9.54
You Save:: $1.59

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley Drain Pump

4.9 (83)

By: Frigidaire

Part Number: 137108000

The Drain Pump is an OEM part for Frigidaire washing machines. It's engineered to efficiently remove used water from the washer at the end of each wash cycle, playing a critical role in the appliance's ability to prepare for the next load.

Causes of a bad drain pump include blockages from small items or debris, mechanical failure due to wear and tear, or electrical issues preventing the pump from operating.

Symptoms of a bad Drain Pump include:

Water not draining from the washer
Unusual noises coming from the pump area, indicating a blockage or failure
The washer not completing its cycle
Error codes displayed on the washer related to draining issues

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

This part fixes the following symptoms

Will not drain

Do-It-Yourself Stories from Customers like You Washing machine wasn't draining properly and the drain pump sounded loud and whiny Chris S. • Boulder , CO • March 30, 2014

Replace the drain pump after watching a video demonstrating the process. The washing machine had run properly and emptied, so I was surprised how much water remained in the pipe after disconnecting the old pump. Plan on having 2-3 large towels underneath before removing it. The most difficult part (and most irritating) was replacing the intake and outtake hoses with the existing spring clamps. The drain hose into the pump took almost twenty minutes to attach properly. If the hardware store was... Read more

$130.62

Compare At:: $156.74
You Save:: $26.12

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley High Temperature Adhesive

4.8 (23)

By: Frigidaire

Part Number: 5308027429

The High Temperature Adhesive is an OEM part for Frigidaire appliances. This adhesive is specifically formulated to withstand high temperatures and is used in various repair applications within appliances such as ovens, ranges, and dryers.The 1-ounce tube contains adhesive formulated to withstand the extreme heat inside dryer drums and cabinets

Causes of a bad adhesive can include exposure to extremely high temperatures over extended periods, contamination by dirt or grease, or the natural aging and drying out of the adhesive.

Symptoms of a bad high temperature adhesive include:

Components or parts becoming loose or detached
The adhesive becoming brittle or cracked
Inability to properly bond surfaces exposed to high heat
Visible deterioration or peeling of the adhesive

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Marks left on clothes
Noisy

Do-It-Yourself Stories from Customers like You Clothes getting stuck in front of dryer then later on a grinding and loud noise when spinning Michael G. • Chicago , IL • August 23, 2020

I'm new to how a dryer works, so I just started taking it apart to see what exactly was causing it. The video examples on the APP website were all amazing. It gave me a good idea of what I was getting into and showed me the common repair issues. The dryer being 12 years old, I was on the fence about repairing or replacing. However, once I got a list of parts I might need and getting the confidence by watching the videos, I said "what have I got to lose." The cause of the scraping and loud... Read more

$49.95

Compare At:: $58.94
You Save:: $8.99

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Crosley Drain Pump Assembly

4.9 (88)

By: Whirlpool

Part Number: WP35-6465

The Drain Pump Assembly is an OEM part for Whirlpool washing machines. This component is responsible for efficiently removing water from the washer's tub during the drain cycle. It plays a crucial role in ensuring that the washing machine operates smoothly by pumping out dirty water, thereby preparing the machine for the rinse and spin cycles.

Over time, drain pumps can become clogged or fail due to debris build-up, wear and tear from regular use, or electrical malfunctions. When the drain pump is compromised, it can lead to water drainage issues, affecting the overall performance of the washing machine.

Symptoms of a bad drain pump assembly include:

Water not draining from the washer
Unusual noises such as grinding or humming during the drain cycle
The washer stopping mid-cycle or displaying error codes related to drainage
Visible leaks from the pump area

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Will not drain
Burning smell
Noisy

Do-It-Yourself Stories from Customers like You Loud knocking and rattle while in spin cycle. Daniel K. • Grafton , WI • July 30, 2017

18 year old Maytag Atlantis top load washer had a load knocking and rattle sound with excessive vibration when the tub was spinning, but not when it was agitating. They was no water leaking. I took the front panel off and carefully listened while I ran a cycle and the loud sound sounded like it was coming from the drain pump. So I took off the drive belt and noticed that it was glazed and that there was belt material on the drain pump and tub transmission pulleys. I removed the drain pump and... Read more

$80.52

Compare At:: $96.62
You Save:: $16.10

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley Drum Drive Belt

4.7 (19)

By: Frigidaire

Part Number: 134051000

The Drum Drive Belt is an OEM part for Frigidaire dryers. It connects the drum to the motor, enabling the drum to rotate and tumble the clothes during drying cycles. The belt is 54 inches long and 5/8 inches wide

You should replace this drum drive belt if it becomes worn out, frayed, or broken due to the high heat and friction involved in the drying process. Additionally, improper loading or overloading of the dryer can cause the belt to stretch or snap.

Symptoms of a bad drum drive belt include:

Dryer drum not turning
A loud thumping or squealing noise during operation
Dryer stopping mid-cycle
Clothes remaining wet after the drying cycle

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This part fixes the following symptoms

Spins slowly

Do-It-Yourself Stories from Customers like You Severe banging during spin cycle Vince V. • Benson , AZ • March 03, 2019

With more difficulty and frustration than expected but it works fine now. Things learned: 1. Order only 3 replacement pins. One comes with the shocks that you can't be sure you see in the picture. 2. A circuit board in a plastic box mounted to the floor, left rear, must be removed by two screws to be able to get pliers onto the head of the pin more easily. This helps installation too. 3. A 1/2" deep socket pushed onto the retaining tab of the pin stays there while you pull with pliers from the... Read more

$21.95

Compare At:: $30.17
You Save:: $8.22

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Best Seller

Genuine Frigidaire part

Crosley Drain Pump

4.9 (31)

By: Frigidaire

Part Number: 137240800

The Drain Pump is an OEM replacement part for Frigidaire front load washers. Located inside the base of the washing machine tub, it actively pumps out water through the drain hose after each cycle completion. Efficient drainage is vital for preventing standing water issues.

Causes of a bad drain pump can include mineral or scale buildup within the pump chamber or impeller over time. The water valve may fail to open fully, blocking drain flow. Bearings may wear, causing the impeller to jam.

Symptoms of a bad drain pump are:

Incomplete water draining after the cycle
An accumulation of water remaining in the tub
Leaking from the base
Error codes could indicate drainage problems.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore.

Do-It-Yourself Stories from Customers like You E21 water not pumping out fast enough (eiflw55hmb washer) Helmut D. • Rancho Palos Verdes , CA • April 20, 2020

Replaced pump. All components are accessible from the front of the machine. You have to remove two screws in the back that hold on the top cover, then slide the cover back. This will allow access to the screws that hold on the control panel. Remove the control panel (unplug cable), then remove the spring/wire that holds on the door bellows to the front panel (removing and installing that is the most difficult part of the job) and carefully remove the bellows from the front panel. Then remove... Read more

$126.95

Compare At:: $152.34
You Save:: $25.39

IN STOCK

Ships Tomorrow Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Crosley Washer Parts

Crosley Drain Pump

Crosley Female Dryer Door Catch

Crosley Belt And Isolator Kit

Crosley Appliance Spray Paint

Crosley Vacuum Break Inlet Hose

Crosley Agitator

Crosley Appliance Touchup Paint

Crosley Door Strike

Crosley Front Leveling Foot

Crosley Lid Hinge

Crosley Hose Clamp

Crosley Drain Pump

Crosley High Temperature Adhesive

Crosley Drain Pump Assembly

Crosley Drum Drive Belt

Crosley Drain Pump

Related Parts

Common Problems

Popular Crosley Washer Models