Dishwasher Dispenser Parts
Genuine Bosch part
By: Bosch
Part Number: 00166632
This actuator lever assembly with springs replaces a worn or broken control lever to restore proper mechanical movement in the appliance. It helps the dispenser/latch mechanism operate smoothly for reliable everyday use. What it does:
- Transfers motion from a control cam or motor to the latch or dispenser linkage
- Restores proper engagement when a broken or fatigued lever prevents operation
- Helps stop intermittent or failed cycle starts caused by damaged mechanical linkage
- Works as a direct-fit replacement that re-establishes spring tension and lever action
What's included: One actuator lever assembly with attached springs. Install notes:
- Disconnect power before accessing internal components to avoid shock or injury
- Basic hand tools usually required; maintain original screw/hardware if reusing
- Inspect surrounding linkages and replace damaged clips or fasteners as needed
Do-It-Yourself Stories from Customers like You
Control panel was cracked. Janet C. • Loganville , GA • April 01, 2023
Ordered a replacement control panel and installed it according to the AppliancePartsPros.com YouTube video.
Read more
More
$8.10
- Compare At:
-
$8.91
- You Save:
-
$0.81
Out Of Stock
Usually ships within 4 - 14 days
Genuine Bosch part
By: Bosch
Part Number: 00166627
This plunger is a small push-style actuator that transfers motion between linked components, restoring proper mechanical engagement for the related mechanism. It's a direct-fit replacement designed to return a lever or latch to its resting position. What it does:
- Acts as the push/pull actuator in a latch, dispenser or control assembly to transmit motion
- Helps the related mechanism engage, release, or return smoothly when working correctly
- Common symptom: lever or latch fails to engage, stick, or does not return to home position
- Prevents intermittent operation caused by a worn or broken push rod
What's included:
Install notes:
- Disconnect power before beginning any repair to avoid electrical or mechanical hazards
- Access may require removal of trim or housing panels; keep small parts organized
- Inspect mating pivot points and bushings for wear; replace if excessively worn
More
$12.95
- Compare At:
-
$15.54
- You Save:
-
$2.59
Out Of Stock
Usually ships within 4 - 14 days
Genuine Danby part
By: Danby
Part Number: 17476000001465
$89.55
- Compare At:
-
$106.56
- You Save:
-
$17.01
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5300809898
$29.95
- Compare At:
-
$35.34
- You Save:
-
$5.39
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X10106
This rinse aid cap fits the dishwasher rinse aid dispenser and seals the reservoir to keep liquid in the dispenser until released during the wash cycle. Replacing a cracked or missing cap prevents leaks and improves rinse aid dispensing. What it does:
- Seals the rinse aid reservoir so the dispenser releases product only during the rinse cycle
- Prevents leaks or drips from the dispenser fill opening
- Helps maintain proper rinse aid levels for better drying and spotting control
- Fits the dispenser housing and snaps or screws into place per original design
What's included:
- One rinse aid dispenser cap
Install notes:
- Turn off and disconnect power to the appliance before servicing
- Remove any remaining rinse aid from the dispenser before replacing the cap
- Install by aligning and seating the cap securely; do not force if it does not fit smoothly
More
$24.95
- Compare At:
-
$47.27
- You Save:
-
$22.32
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X10251
Do-It-Yourself Stories from Customers like You
Liquid detergent draining from smartdispense reservoir John B. • Midland , TX • February 21, 2015
Very easy repair. Remove front door bottom panel (3 lowest screws from inside of door on left side and right side with #2 Philips screwdriver). Then remove 2 screws on bottom of door with socket set, I believe 1/4". I also used a mirror so I could see what I was doing. Remove cover and the detergent dispensing Asm has 2 screws to hold it down, a hose clamp to hold hose in place and a quick connect electrical connector. Just replace the part and re-install the door and that is it. Part # is...
Read more
More
$149.70
- Compare At:
-
$178.14
- You Save:
-
$28.44
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303351105
$21.68
- Compare At:
-
$22.86
- You Save:
-
$1.18
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5308015653
$10.95
- Compare At:
-
$11.73
- You Save:
-
$0.78
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X10028
$100.62
- Compare At:
-
$130.49
- You Save:
-
$29.87
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD16X315
$10.95
- Compare At:
-
$21.72
- You Save:
-
$10.77
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X10252
$4.10
- Compare At:
-
$8.36
- You Save:
-
$4.26
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WR02X10734
$18.95
- Compare At:
-
$22.74
- You Save:
-
$3.79
Out Of Stock
Usually ships within 4 - 14 days
Genuine Frigidaire part
By: Frigidaire
Part Number: 5303351110
$18.84
- Compare At:
-
$20.72
- You Save:
-
$1.88
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X5041
$33.60
- Compare At:
-
$33.83
- You Save:
-
$0.23
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD12X5048
$16.38
- Compare At:
-
$21.31
- You Save:
-
$4.93
Out Of Stock
Usually ships within 4 - 14 days
Genuine Ge part
By: Ge
Part Number: WD1X1387
$14.95
- Compare At:
-
$19.38
- You Save:
-
$4.43
Out Of Stock
Usually ships within 4 - 14 days