Dishwasher Filter

This fine filter assembly sits in the bottom of the dishwasher tub and screens out small food particles so recirculating water stays cleaner. Replacing a torn or warped filter helps restore wash performance and protects the pump and spray arms from debris.

• Traps fine debris to reduce redeposit on dishes and glassware
• Supports proper water circulation and spray pressure
• Helps shield the wash pump and spray arms from clogs or damage
• Replace if the mesh is torn, warped, missing, or persistently clogged; common signs include gritty residue or food left on dishes

• Disconnect power at the breaker before servicing inside the tub
• Remove the lower rack; if required, remove the lower spray arm and release your model's retainer (nut/clip/screws) to lift out the old filter
• Clear debris from the sump; seat the new filter flat and lock/secure it fully, then reinstall any removed parts
• The filter is locked in place before running a test cycle

The Filter-Micro is an OEM part for Bosch dishwashers. This filter plays a critical role in trapping food particles and debris during the wash cycle, preventing them from recirculating and ensuring that the water used for cleaning is as clean as possible. By maintaining proper filtration, it helps improve the dishwasher’s cleaning performance and extends the life of the pump and other components.

Over time, the filter can become clogged with food particles, grease, or mineral deposits, which may reduce its effectiveness. Regular cleaning can extend its life, but eventually, it may need to be replaced if it shows signs of wear or damage.

Symptoms of a bad filter include:

• Poor cleaning results
• Water drainage issues
• Strange noises during operation
• Dishes remaining dirty after a wash cycle

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore dishwashers.

The Vent Filter is an OEM part for GE dishwashers. It helps to capture and filter out food particles, grease, and other debris. 

Causes of a bad vent filter can include clogging or blockage due to accumulated debris, wear and tear over time, or damage to the filter material.

Symptoms of a bad vent filter include:

• Lingering unpleasant odors during or after the dishwasher cycle
• Visible signs of debris or buildup on the filter surface
• Reduced effectiveness of the dishwasher's drying performance

Replace your worn-out or clogged vent filter with this genuine OEM GE part to restore your dishwasher. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This adapter tube assembly connects sections of the appliance's water line to create a secure, leak-resistant path for water flow. Replace it if the tube is cracked or the connection no longer seals properly to prevent leaks and restore flow.

• Connects water tubing between components within the appliance's water system
• Helps maintain a tight, leak-resistant seal at the joint
• Restores proper water flow when a tube or connector is damaged
• Typical symptoms: water leaking at the connection, reduced or no water flow, visible cracks/kinks, loose fit

• Disconnect power and shut off the water supply before servicing
• Relieve line pressure and place a towel or pan to catch any residual water
• Note routing and orientation before removal to ensure correct reassembly
• After installation, restore water and check all connections for leaks

The Dishwasher Filter Mesh Body is an essential component designed to effectively trap food particles and debris during each wash cycle. This genuine OEM part ensures seamless compatibility with your Samsung dishwasher, maintaining the appliance's optimal performance and longevity. Crafted from high-quality PP+Talc material, the filter mesh body provides reliable filtration, preventing clogging and ensuring your dishes come out sparkling clean. Its durable construction is resistant to heat and chemicals, maintaining integrity over countless wash cycles. The gray color seamlessly blends with your appliance, offering a discreet and functional solution. Easy to install, this Dishwasher Filter Mesh Body allows you to quickly replace a worn or damaged filter without hassle. By choosing this genuine OEM part, you can trust in its durability and precise fit, enhancing your dishwasher's efficiency and ensuring a superior cleaning experience every time. Whether youGÇÖre repairing your dishwasher or performing routine maintenance, the Dishwasher Filter Mesh Body is the perfect choice for maintaining cleanliness and efficiency in your kitchen.

The Dishwasher Filter Screen is an OEM part for Whirlpool dishwashers. As a key filtration component, the filter screen traps food particles and debris to prevent clogs and ensure optimal water circulation during wash cycles. It is responsible for filtering out contaminants and protecting internal pump components from damage.

Symptoms of a bad filter screen include:

• Reduced or uneven water pressure during wash cycles  
• Puddles or pooled water inside the dishwasher
• Food debris caught in the pump or other areas  
• The dishwasher fails to fill or drain properly
• Unusual noises emanating from the dishwasher

Causes of a bad filter screen can include clogging over time due to accumulated food waste and mineral deposits or damage such as cracks or tears in the screen material.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dishwashers.

This microfilter sits in the dishwasher sump to capture fine food particles so water recirculates cleanly. Replacing a torn or clogged filter can help restore wash performance and protect the pump and spray arms from debris.

• Screens out fine debris to keep recirculating wash water cleaner
• Helps prevent redepositing and spray-arm clogs
• Common signs include gritty residue on dishes, poor cleaning results, visible tears/warping, or a filter that won't lock securely

• Disconnect power at the breaker before servicing.
• Open the door and remove the lower rack.
• Twist to unlock and lift out the old filter; clear any debris from the sump (locking direction varies by model).
• Seat the new filter fully and rotate to lock; ensure it's flush and secure.

The Pump Filter is an OEM part for Whirlpool dishwashers. This filter is a critical component that screens out food particles and other debris from entering the wash and drain pumps. It helps maximize the lifespan of the pumps and ensures efficient circulation of water during each wash cycle.

Causes of a bad pump filter can include clogging over time due to built-up food particles or mechanical damage from hard objects inadvertently entering the filter. 

Symptoms of a bad pump filter include: 

• Reduced or no water circulation in the dishwasher 
• Loud buzzing or grinding noises coming from the pump area
• Leaks emerging from the pump
• Inability to properly fill or drain water

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This Filter Screen is an OEM part for Bosch Dishwashers. This filter screen efficiently traps debris and food particles, ensuring optimal washing performance.

A common issue with a faulty Filter Screen is clogging due to accumulated debris and food residue. Over time, this can obstruct water flow, resulting in poor cleaning performance or potential drainage problems.

Symptoms of a malfunctioning Filter Screen may include:

• Dirty dishes after a complete wash cycle
• Standing water at the bottom of the dishwasher
• An unpleasant odor emanating from the dishwasher

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

The Drain Filter is an OEM component specifically designed for Frigidaire dishwashers. It is designed to trap food particles and debris from exiting the dishwasher and entering plumbing drains.

Causes of failure usually stem from normal wear and potential mineral deposits reducing pore size over many years of use. Hard water areas present additional stress. 

Symptoms of a clogged or ineffective drain filter include:  

• Slow or incomplete draining after cycles
• Gurgling noises from drain line blockages
• Potential plumbing backups and repairs from unfiltered waste

This OEM part fits Electrolux, Gibson and Kenmore models as well.

Cylindrical filter that helps trap sediment and debris to protect your appliance's internal components and maintain water flow. Replacing a worn filter restores filtration and helps prevent clogging-related performance issues. What it does:

• Captures sediment and particulates to reduce debris reaching valves, pumps, and dispensers.
• Helps maintain consistent water flow by preventing buildup in flow paths.
• Reduces risk of clogs that can cause noisy operation or degraded performance.
• Common symptom: reduced water flow or visible particles in water/dispensed liquids.

• Turn off power to the appliance and shut off the water supply before starting.
• Relieve pressure and drain water from the lines where applicable to avoid spills.
• Inspect and replace any worn O-rings or seals; ensure the filter seats properly.
• After installation, restore power/water and run a short cycle or check for leaks.

This replacement trap is a drain-path component that helps create a water seal and route water out of the unit, reducing backflow and odors. Replace a cracked, clogged, or deformed trap to restore proper drainage and leak protection.

• Forms a water seal in the drain path to help prevent air backflow and odors
• Directs water safely away from the appliance to the designated drain
• Can help alleviate leaks, standing water, or gurgling due to a damaged trap
• Typical symptoms: slow or no draining, water leaks at the drain outlet, musty odors

• Disconnect power; shut off water supply if applicable
• Place a towel or pan to catch residual water during removal
• Transfer any O-rings, seals, or fittings from the old part
• Ensure correct orientation and fully seat/secure connections; test operation and check for leaks

Filter only. Fine filter not included.

This fine mesh plastic screen filters debris from the water path to protect downstream components and help maintain proper wash performance.

• Traps fine particles to prevent clogs in the circulation/inlet path
• Helps reduce spray pressure loss and poor cleaning results
• Can address issues like gritty residue, reduced water flow, or noisy pump operation
• Wear, mineral buildup, or tearing can require replacement

• Disconnect power and shut off water before service
• Note orientation and seating of the original screen; install the replacement fully and evenly
• Inspect surrounding seals and mating parts; clean any sediment before reassembly
• Restore power/water and check for leaks and proper operation

This fine filter captures small food particles and debris from dishwasher wash water to help protect the pump and keep drains from clogging. Designed to fit into the dishwasher sump for reliable filtration and consistent wash performance. What it does

• Traps fine food particles and sediment before they reach the pump and spray arms
• Reduces the chance of drain clogs and pump damage from debris
• Helps maintain consistent wash and drainage performance when clean
• Common symptoms that indicate replacement: poor draining, recurring food remnants on dishes, or unusual pump/grinding noises

• Disconnect power to the appliance before servicing
• Remove the lower rack to access the sump and twist/lift the old filter assembly out
• Clean surrounding area and seating surface before installing the new filter; ensure it seats and locks correctly
• Do not force or over-tighten; reassemble racks and restore power before testing