Dishwasher Filter

This replacement fan blade circulates air inside the appliance to help maintain proper cooling and airflow. A direct-fit blade restores air movement for consistent temperature distribution and efficient operation. What it does:

• Spins on the motor shaft to move air across the evaporator or condenser for cooling
• Helps prevent hot or cold spots by promoting even airflow through the compartment
• Can reduce frost buildup and assist the compressor by improving heat exchange
• Worn or damaged blades may cause vibration, noise, or reduced cooling performance

• One replacement fan blade

• Disconnect power before servicing to avoid electrical shock or injury
• Handle the blade carefully to avoid bending; balance issues can cause noise or motor strain

The Pump Filter is an OEM part for Whirlpool dishwashers. It is a filter that screens debris from entering the pump and wash arms during the dishwashing cycle.

The pump filter is responsible for catching food particles and other residue, preventing clogs and maintaining optimal water flow throughout the dishwasher. It ensures the pump and other internal components are kept clean.

Symptoms of a clogged or damaged pump filter include:

• Excessive noise or vibrations coming from the pump area
• Slow or reduced water drainage
• Built up residue in the filter housing or sump area
• Incomplete cleaning or drying results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Fine Filter is an OEM part for GE dishwashers. Located at the bottom of the dishwasher tub, the fine filter traps small food particles and debris to prevent clogs in the wash pump and other components. It is a critical filter that helps optimize cleaning performance and protect internal mechanisms.

Symptoms of a bad fine filter include:

• Reduced or inefficient water spraying from the arms  
• Accumulation of debris inside the tub
• Foul odors emitting from the dishwasher
• Drainage or water flow issues 

Over time, particles can accumulate in the fine filter mesh causing it to become clogged. Choosing this genuine GE replacement ensures optimal filtration. It upgrades your dishwasher with a new filter to once again trap particles and keep the wash system running smoothly. This OEM GE part aligns with specifications for Crosley, KitchenAid, and select Kenmore dishwashers as well.
 

The Plastic Coarse Filter is an OEM replacement part for GE dishwashers. It refers to a screen fitted over the wash impeller that traps soil and food debris. Subject to constant exposure to water and detergents, plastic parts can wear down over many cycles. 

Symptoms of a bad coarse filter include:

• Clogged or blocked mesh no longer prevents large particles from entering the wash arm spray jets  
• Cracks along seams or mounting points where water can seep behind
• Brittle or broken crosspieces within the screen compromising structural integrity

Causes of failure relate to the chemical deterioration of plastic combined with physical stresses as debris repeatedly builds up and then dislodges during high-velocity rinse cycles.

This GE replacement part is also compatible with some Hotpoint and RCA models.

This replacement filter screens out debris within your appliance to protect key components and keep performance steady. Swap in a new filter when the old one is damaged or clogged to restore proper flow and efficiency. What it does:

• Captures debris and particles to help prevent blockages
• Supports proper flow/circulation for consistent performance
• Helps limit residue buildup and related odors when maintained
• Typical symptoms include slow or restricted flow, unusual noises, or visible damage/clogging

• 1 filter

• Disconnect power; shut off water supply if your appliance uses water
• Access the filter per your model's instructions and note its orientation
• Transfer any reusable seals or clips from the old filter if applicable
• After reassembly, run a brief test and check for leaks or abnormal sounds

This fine screen is the small mesh filter that sits in the dishwasher sump to catch food particles and help protect the pump and wash system. It keeps debris from circulating so dishes rinse more effectively. What it does:

• Traps food and debris in the sump to prevent clogging and pump damage
• Helps maintain proper water flow for consistent wash and drain performance
• Reduces risk of food redepositing on dishes during cycles
• Commonly replaced when torn, heavily clogged, or missing

• One fine mesh sump screen

• Turn off power and disconnect the dishwasher before servicing
• Remove the lower dish rack and access the sump area to replace the screen
• Inspect surrounding seals and housing for damage while servicing
• No special tools typically required; handle mesh gently to avoid deformation

This pump sump screen filters lint, debris and small objects from wash water before it reaches the drain pump, helping prevent clogs and pump damage. Replace a cracked or clogged screen to restore proper draining. What it does:

• Captures lint, coins, hair and small debris before the drain pump
• Helps prevent pump blockages that cause poor draining or standing water
• Reduces wear on the drain pump by stopping larger debris
• Improves overall drain performance when the existing screen is damaged or clogged

• Disconnect power and water before accessing the pump area
• Remove the washer access panel or cabinet per your model's service instructions to reach the sump
• Inspect and clean surrounding areas and the pump inlet when replacing the screen

This filter assembly is the water-filter housing that secures and connects the refrigerator's replaceable cartridge to the water supply, helping deliver filtered water and ice for everyday use. Fits inline with the fridge's dispenser/ice system. What it does:

• Holds and seals the replaceable water filter cartridge so water is routed through the filter media
• Enables filtered water to reach the dispenser and ice maker, improving taste and clarity
• Prevents leaks at the cartridge connection when properly installed and sealed
• Can cause no water from dispenser, reduced ice production, or leaking if damaged or worn

• Shut off the refrigerator's water supply before removing or installing the assembly
• Disconnect power or unplug the appliance when accessing internal components for safety
• Check and replace O-rings or seals as needed to ensure a watertight connection
• After installation, turn water back on and flush per filter manufacturer's instructions to clear air and loose carbon fines