Dishwasher Handle

This is a genuine door strike that is a replacement for several models of dishwashers. The door strike catches and latches the door so that the computer knows that it is safe to run the cycle and seal the unit. This door strike works by bending to catch the latch when closed, and can become worn over time. It may also be damaged by an object or bent in a way that affects its operation. If the door strike fails, the dishwasher may not operate until it is replaced. The unit may continue to work, but leak or not work properly. In any case, replacing the door strike with this OEM part will resolve the issue. This genuine door strike is made of durable metal and sold as an individual part. Hardware is sold separately. This door strike is manufactured to exact standards for use in select models by General Electric, including their Hotpoint brand. Be sure to wear gloves when working on appliances. A screwdriver will be needed to make this repair.

This door catch and strike work together to keep the door securely closed and engage the safety interlock switch. Replacing worn pieces restores a firm latch and reliable operation when the door is properly shut.

• Aligns and engages the latch so the door stays closed during operation
• Activates the door switch so cycles can start
• Helps prevent the door from popping open mid-cycle
• Common symptoms: door won't latch without force, unit won't start, visible wear or a bent strike

• Disconnect power to the appliance before servicing
• Open the door and remove mounting fasteners to swap the catch and strike
• Adjust strike alignment/depth so the latch engages fully and the door sits flush
• Restore power and test for smooth closing and proper cycle start

This door latch assembly secures the appliance door and engages the door switch so cycles start and run normally. It replaces a worn or broken latch to restore reliable door closure and operation. What it does

• Secures and holds the door closed during operation so the appliance can run
• Engages the door switch/lock circuit to allow the control to start cycles
• Prevents the door from opening mid-cycle, improving safety and performance
• Common symptom fix: door won't stay closed, won't latch, or appliance won't start

• Disconnect power (and water, if applicable) before beginning any work
• Removal of the outer door or access panel may be required for replacement
• Handle plastic clips and mounts carefully to avoid breakage during installation

Color: Black

This replacement door handle restores a solid, comfortable grip for opening and closing the refrigerator door. It replaces cracked, broken or loose handles so the door operates safely and reliably. What it does:

• Provides a secure gripping surface to open and close the refrigerator door
• Replaces cracked, broken or missing handles that make the door hard to use
• Restores proper engagement with the door hardware for reliable operation
• Helps prevent accidental drops or further damage from a failing handle

• Disconnect power to the appliance or unplug the refrigerator before starting any work
• Remove any trim or end caps to access mounting screws; retain original hardware unless stated otherwise
• Hand-tighten mounting screws, then snug—do not overtighten to avoid cracking the handle

This replacement door lock hook secures the appliance door latch assembly so the door stays closed during cycles, preventing interruptions and ensuring proper operation. Fits into the door/latch mechanism to engage the lock. What it does:

• Captures and holds the door strike so the door remains firmly closed during operation
• Helps the door lock switch engage properly to allow cycle start and prevent mid-cycle door openings
• Commonly replaced when the door won't stay closed, the latch feels loose, or the door intermittently unlocks
• Works as the mechanical mating piece for the door lock assembly

• Disconnect power and water before starting any repair
• Requires access to the door/latch area—some disassembly of the door or console could be needed
• Use basic hand tools and keep track of fasteners; avoid forcing plastic tabs to prevent breakage

This black replacement door handle restores a dishwasher's exterior grip and appearance, letting the door open and close securely. It matches factory fit and finish for compatible Bosch dishwasher models. What it does:

• Replaces a cracked, broken or missing door handle to restore normal door opening
• Provides a solid grip for pulling the dishwasher door open and closed
• Restores the appliance's exterior appearance when the original handle is damaged
• Fits the factory handle mounting locations and aligns with the door trim

• One black door handle

• Disconnect power to the dishwasher before starting any repair
• Support the door while removing fasteners to prevent it from closing unexpectedly
• Remove interior door panel or trim as required to access handle screws or clips
• Use manufacturer service manual or OEM instructions for step-by-step removal and reassembly

This stainless steel door handle restores a damaged or worn handle to bring back a secure grip and the refrigerator's finished look. It's a direct replacement designed for the matching Whirlpool appliance series. What it does:

• Replaces cracked, bent, loose or cosmetically damaged door handles
• Provides a solid grip to open and close the door reliably
• Restores the appliance's stainless finish for a consistent appearance
• Matches OEM fit and mounting points when installed correctly

• One stainless steel replacement door handle

• Support the door while removing/installing the handle to avoid damage or injury
• Some installations require removing the door trim or top hinge screws—use common hand tools
• Do not overtighten fasteners; thread engagement should be secure but not forced

Color: Bisque

This genuine-style refrigerator door handle provides a secure grip for opening and closing the fridge door and restores the appliance's appearance after a broken or worn handle. Durable finish matches common Whirlpool styling. What it does:

• Replaces a damaged, cracked or loose refrigerator door handle to restore proper door operation and appearance
• Provides a comfortable, sure hand grip for opening and closing the door
• Helps prevent further cabinet or door damage caused by using a compromised handle
• Fits the OEM mounting points for a clean, factory-like fit

• Use basic hand tools; disconnect power only if panels or lighting need removal for access
• Support the door while removing/installing to avoid strain on hinges or other components
• Keep fasteners and trim pieces organized to ensure correct reassembly
• Replace any damaged clips or screws with OEM parts to ensure secure mounting

This door latch cover is a direct-fit replacement trim piece that protects and conceals the dishwasher door latch assembly while restoring a finished appearance. Keeps the latch area tidy and helps ensure the door closes cleanly. What it does:

• Covers and protects the door latch mechanism from debris and wear
• Helps the door latch engage and the door sit flush when closed
• Restores the appliance's cosmetic finish around the latch area
• Can address symptoms such as a loose-looking latch area or an unsealed door edge

• Disconnect power to the appliance before installing; follow lockout/tagout practices
• Basic hand tools (screwdriver or trim tool) are typically required to remove the old cover
• Align the new cover over the latch assembly and snap or fasten into place per OEM diagram
• If the latch mechanism or strike is damaged, replace those parts as needed for full repair

This door handle replaces a worn or broken appliance door grip to restore a secure, comfortable surface for opening and closing. Designed to match the original fit and appearance for easy cosmetic repair. What it does:

• Provides a sturdy grip for opening and closing the appliance door
• Replaces cracked, loose, or cosmetically damaged handles
• Restores proper leverage to reduce stress on the door latch and hinges
• Helps improve the look of the appliance by replacing a worn handle

• One door handle

• Refer to your appliance model's service manual for step-by-step removal and installation instructions
• Installation typically requires basic hand tools; disconnect power (and water if applicable) before servicing
• Handle may attach with screws or snap-fit clips—keep removed fasteners for re-use unless replacements are provided

This keeper latch assembly is the replacement latch that secures the appliance door or drawer in the closed position, restoring a proper seal and reliable closing action. It helps stop doors from popping open and keeps contents contained. What it does:

• Acts as the catch that holds the door or drawer closed
• Restores proper latching when worn, broken, or misaligned
• Helps prevent cold air loss and items shifting during use
• Reduces rattling or intermittent opening caused by a damaged latch

• One keeper latch assembly

• Disconnect power (or unplug) and empty the door/drawer area before starting
• Inspect surrounding trim and strike for damage; replace if needed for proper engagement
• Install by aligning latch with mounting holes and securing fasteners; verify proper catch engagement

This towel bar assembly replaces a worn, cracked, or loose oven door handle to restore a secure grip and clean appearance. Designed to mount to the oven door so you can open and close the door safely and easily. What it does:

• Provides a sturdy handle for opening and closing the oven door
• Replaces broken, bent, or loose towel bars or mounting tabs
• Restores proper alignment and grip for safe operation
• Helps maintain the oven door's finished appearance

• Disconnect power to the appliance before beginning any repair
• Handle hardware may require removal of the oven door or access panel; keep fasteners for reassembly
• Use appropriate hand tools and avoid overtightening to prevent stripping threads or cracking mounting tabs