Dishwasher Spray Arm & Related

Also considered middle sprayarm on some dishwashers having a rinse arm on the ceiling.

Also Order Spray Arm Seal

This is the upper spray arm that distributes wash water to the top rack. Replacing a cracked, warped, or clogged arm restores even spray coverage and helps the arm spin freely so glasses and bowls come out consistently clean.

• Directs high-pressure jets to the upper rack and rotates under water pressure for full coverage
• Maintains even water distribution to improve cleaning performance
• Common symptoms of a failed arm: top-rack items not getting clean, arm not spinning, uneven spray, cracks or clogged nozzles

• Disconnect power and water supply before servicing the dishwasher
• Remove or lower the upper rack if needed; release the retaining nut/clip and pull the old arm straight off
• Seat the new arm fully on the hub/manifold and secure the retainer; verify it spins freely
• Run a short test cycle to ensure proper spray and operation

This tower protector is a small plastic cover that fits over the dishwasher's spray tower. It helps keep dishes and utensils from obstructing the tower's spray outlets so water can circulate properly for consistent cleaning.

• Shields the spray tower to prevent items from blocking water flow
• Helps maintain proper spray pressure and coverage to upper areas
• Replaces cracked, melted, or missing protectors that can lead to poor cleaning
• Common signs it's needed: protector is broken/loose, deformed, or repeatedly falls off; dishes aren't getting clean due to blocked spray

• Disconnect power and water before service
• Allow the dishwasher interior to cool
• Open the door, remove the lower rack, and snap the protector into place per the tower/rack design
• Verify it seats securely and does not interfere with the spray tower movement

This is the dishwasher upper spray arm that delivers water across the top rack for effective cleaning. It replaces a worn or damaged spray arm to restore proper water distribution and rinse performance. What it does:

• Spins and sprays water across the top rack to help remove food and detergent residue
• Restores proper spray pattern when the original arm is cracked, clogged, or not turning
• Helps prevent poor cleaning, spots, or missed areas on top-rack dishes
• Works with the dishwasher's water delivery system to maintain rinse and wash coverage

• One upper spray arm

• Turn off power and water to the dishwasher before beginning any service
• Inspect and clear any debris from the spray arm and the mounting area before installation
• Hand-tighten or snap the arm into place per your model's instructions; avoid overtightening

This manifold is the OEM gas valve assembly that routes propane or natural gas from the regulator to the oven and burner valves so the appliance can ignite and heat properly. Designed as a direct-replacement service part. What it does

• Channels gas from the regulator to individual burner/oven valves so each burner can ignite.
• Replaces a worn or damaged manifold that can cause weak or no ignition.
• Addresses symptoms such as burners that won't light, oven failing to heat, or inconsistent flame across burners.
• Works with the appliance's existing regulator and control valves when installed correctly.

• Turn off gas supply and electrical power before attempting removal or service.
• Inspect fittings and gaskets; replace any damaged seals to prevent leaks.
• After installation, perform a gas-leak test and verify proper ignition and flame patterns.

The Lower Washarm is an OEM replacement part for Whirlpool dishwashers. Positioned at the bottom of the dishwasher tub, it rotates during the wash cycle, distributing water and detergent evenly across the lower rack. 

Over time, wash arms can become clogged with food debris or mineral deposits, reducing water flow. Physical damage such as cracks or warping can also impede the wash arm's rotation and affect its cleaning performance.

Color: Gray

Symptoms of a faulty lower wash arm include:

• Inadequate cleaning of dishes on the lower rack
• Uneven or inconsistent water spray
• Clogged or obstructed spray nozzles
• The arm not spinning or rotating correctly

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper spray arm sprays water across the top rack to help remove food and rinse dishes for better cleaning coverage. It replaces a damaged or clogged upper spray arm to restore normal spray pattern. What it does

• Directs pressurized water to clean dishes on the upper rack
• Helps reduce missed spots and improve rinse performance
• Replaces worn, cracked, or clogged upper spray arms
• Works with the dishwasher's existing spray system and fittings

• Disconnect power to the dishwasher (unplug or turn off circuit breaker) before servicing
• Turn off the water supply to the appliance if required by your model
• Remove the upper rack to access the spray arm; handle gently and avoid forcing fittings
• Run a short test cycle after installation to ensure proper fit and spray coverage

Includes both left and right arms.

Color: Gray

This guide casing helps support and align the appliance's moving components so they run smoothly and reduce wear. Replacing a worn guide casing restores proper fit and can help stop rubbing or uneven movement. What it does:

• Centers and supports the moving assembly to maintain correct alignment
• Reduces rubbing, squeaks, or grinding caused by worn or damaged guides
• Helps prevent premature wear on adjacent parts by keeping components on track
• Restores proper movement when the original casing is cracked, warped, or broken

• One guide casing

• Turn off power to the appliance before starting any repair to avoid shock or injury
• Inspect surrounding parts (fasteners, clips, bearings) and replace if damaged
• Use basic hand tools; handle the casing carefully to avoid breaking plastic tabs

Color: Gray

The Middle Spray Arm Kit is an OEM replacement part specific to GE dishwashers. It contains the rotating center arm component that helps distribute water, dishwasher detergent, and moisture across the middle rack shelves for enhanced cleaning.

Causes of a bad middle spray arm can include clogged spray holes inhibiting proper water coverage, worn ball bearings reducing spray force, or broken or missing spray arm attachment clips.

Symptoms of a bad middle spray arm include:

• Items on middle racks not receiving sufficient cleaning
• Dried food or soap scum buildup is visible on rack shelves and dishes
• The arm fails to rotate or spin during cycles
• Detached spray arm is no longer connected to the dishwasher tub

This OEM GE replacement is compatible with many GE, Hotpoint, and Profile dishwasher models.

The Lower Spray Arm is an OEM replacement part for GE dishwashers. It is responsible for distributing water and detergent during the wash cycle, ensuring thorough cleaning of your dishes. This lower spray arm delivers a consistent and powerful spray of water to effectively remove food particles and stains from your dishes.

Symptoms of a faulty lower spray arm include:

• Inadequate cleaning of dishes
• Visible food particles or residue after the wash cycle
• Reduced water pressure during the wash cycle

A bad lower spray arm can occur due to wear and tear over time, clogging from debris or mineral deposits, or physical damage. If you notice poor cleaning results, reduced water pressure, or the spray arm not spinning properly, it may be time to replace the old or damaged lower spray arm with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Upper Spray Arm is an OEM part for Whirlpool dishwashers. It is located below the upper rack and functions to spray water onto dishes during the wash cycle for thorough cleaning.

Causes of a bad upper spray arm include clogs or mineral buildup that reduce or block water pressure, or physical damage rendering the arm unable to spin properly.

Symptoms of a bad upper spray arm include:

• Dirty or inadequately cleaned upper rack dishes
• Spinning noises or clunking from the wash arm area
• Uneven cleaning results

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.