Door, Door Glass & Parts

The Glass-Door is an OEM replacement part for Whirlpool built-in microwaves. It allows for viewing of food as it cooks and is the primary access point for loading and unloading. Color: Black or Dark Stainless

Symptoms of a faulty microwave glass door include: 

• Moisture or mineral deposits adhering inside the glass surface
• Difficulty closing securely or sealing properly 
• Chips, cracks or breaks reduce visibility
• Discoloration or warping appearance issues

Causes can involve impacts over time compromising integrity. Regular opening and closing also subject the pane to stresses from pressure changes. Improper ventilation may result in deposits obstructing visibility.

This genuine OEM Whirlpool door is also compatible with built-in microwaves from Maytag, KitchenAid, Jenn-Air, and Kenmore.

This is a replacement glass door assembly made by Frigidaire. It is made of tempered glass and allows the user to see into the oven and observe food as it cooks. It also prevents heat from escaping.Glass oven doors can be damaged by contact with cold liquids that cause the glass to contract rapidly. If the glass is cracked or broken, the door will need to be replaced. To replace the oven door, locate the screws under the door lip. Remove the bolts holding the handle to the front, and the door should lift away. Reverse these steps to install the new door. The door is quite heavy and may require two people to safely uninstall/install.This is an OEM part. It is sold individually and is compatible with Kenmore and Frigidaire ovens.

Replacement inside door panel that restores the refrigerator's inner door lining and helps secure door bins and insulation. Durable molded plastic improves interior appearance while protecting internal parts from moisture and daily wear. What it does:

• Serves as the refrigerator's inner door surface and mounting area for door shelves and bins.
• Protects insulation, wiring, and components inside the door from spills and debris.
• Replaces cracked, warped or stained inner door liners to restore a clean, finished look.
• Helps maintain proper door sealing by supporting the door structure and components.

• Disconnect power and empty the door before starting; some models require removing door shelves or the door assembly first.
• Panel may secure with screws or snap-in tabs—retain original fasteners and follow model-specific instructions.
• Handle edges carefully to avoid cuts; inspect door gasket and bin hardware after installation.

This inner oven door glass is the replacement inner panel that restores the oven door's sealed viewing surface and helps maintain proper heat retention and safe viewing. It fits behind the outer door glass and is a direct-fit OEM-style panel. What it does

• Replaces cracked, chipped, or fogged inner door glass that impairs viewing or creates safety concerns
• Restores a proper sealed door surface to help keep oven heat contained
• Stops rattling or vibration caused by damaged or loose inner glass
• Improves visibility into the oven cavity when the existing inner glass is cloudy or broken

• One oven door inner glass panel

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Handle glass with care and use gloves/eye protection to prevent cuts
• Installation may require removing the oven door and separating inner and outer glass panels — follow the oven's service manual

This inner oven door glass replaces a cracked, broken or fogged inner door panel to restore thermal performance and visibility into the oven cavity. It helps keep heat in the oven and prevents direct exposure to the internal cavity. What it does:

• Replaces damaged or cracked inner oven door glass that can compromise heating and safety
• Restores the oven door's insulating layer to reduce heat loss and improve cooking consistency
• Provides a clear viewing window to check food without opening the door
• Stops rattling or vibration caused by loose or broken glass

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Wear cut-resistant gloves and eye protection when handling glass to avoid injury
• Some installations require removing the oven door and disassembling door screws or clips; keep fasteners organized

This control panel is the exterior front panel that houses the oven/range controls and provides a finished look while protecting the underlying electronics. It restores a secure mounting surface and normal control access. What it does:

• Provides the user interface area and mounting surface for control buttons, knobs, or touch controls
• Protects internal control electronics from spills, heat, and debris
• Restores a flush, finished appearance when the original panel is cracked, dented, or missing
• Resolves issues where buttons or switches sit unevenly or are difficult to operate due to damaged trim

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Remove adjacent trim and mounting screws to access and replace the panel; handle carefully to avoid scratching or bending
• Keep all original fasteners; replace only parts explicitly required
• If controls or electronic modules are mounted to the panel, verify attachment and wiring connections before restoring power

Color: Black

Color: White

Color: Stainless

This is a Glass Door part for Whirlpool ranges and ovens. It is a durable and heat-resistant glass panel that allows you to monitor the cooking process while keeping the oven interior sealed.

Causes of a malfunctioning Glass Door can include impact or physical damage, exposure to extreme temperature variations, and general wear and tear from repeated opening and closing. 

Symptoms of a bad Glass Door include:

• Cracks or shattered glass
• Difficulty opening or closing the door smoothly
• Gaps or leaks causing heat loss and energy inefficiency
• Discoloration or clouding of the glass over time

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This inner oven door glass panel replaces a cracked, broken or fogged inner door surface to restore safe viewing and help the oven seal against heat loss. Fits inside the oven door assembly as the interior glass layer. What it does:

• Replaces damaged or cracked inner door glass to prevent glass shards and improve safety
• Restores clear viewing of the oven cavity for monitoring food without opening the door
• Helps maintain proper door sealing and effective heat retention when installed correctly
• Reduces heat transfer to the outer door surface compared with a broken or missing inner panel

• Allow the oven and door to fully cool and disconnect power before beginning work
• Handle glass with heavy gloves and eye protection to avoid cuts from edges or breakage
• Door disassembly is typically required; keep track of screws, fasteners and any insulating materials

This oven door glass assembly replaces damaged or cracked door glass to restore visibility and a sealed cooking cavity. It provides a clear viewing area and helps maintain proper oven temperature and safety while cooking. What it does:

• Replaces cracked, chipped, or shattered oven door glass that impairs visibility or creates a safety hazard
• Restores the oven door's sealed surface to help maintain consistent cooking temperatures
• Reduces drafts and heat loss caused by damaged or missing glass
• Improves oven appearance by replacing scratched or clouded viewing glass

• Disconnect power to the appliance and allow the oven to cool completely before starting.
• Handle glass with heavy-duty gloves and eye protection; glass edges may be sharp.
• Installation typically requires removing the oven door and a few screws; follow the OEM service manual for model-specific steps.

This front control panel is the exterior trim piece that covers and protects the appliance's user controls and display, restoring the unit's appearance and keeping the control area sealed from dirt and moisture. What it does:

• Covers and protects push buttons, touch controls, and the display area from damage and debris
• Provides the visible interface and trim around the control electronics
• Restores a clean, finished appearance when the original panel is cracked, scratched, or discolored
• Helps maintain a proper seal around controls to reduce dirt and moisture intrusion

• Disconnect power before starting work to avoid electrical shock
• Remove the old panel by following the appliance's service guide to avoid damaging clips or adjacent parts
• Handle the replacement panel carefully to avoid scratching the finish during installation

This is a replacement drawer and door panel kit that restores the exterior appearance and function of the appliance's lower drawer and adjacent door. It fits as a direct-fit cosmetic panel kit to refresh worn or damaged fronts. What it does:

• Replaces damaged, cracked, or faded drawer and door panels to improve appearance
• Restores a flush, secure fit for the lower drawer and adjoining door
• Helps keep contents protected by providing a properly aligned front surface
• Matches OEM fit and attachment points for straightforward replacement

• Disconnect power before beginning any repairs and take care when moving heavy panels
• Installation may require removal of the drawer, trim screws, and clips; keep fasteners organized
• Use caution to avoid scratching surrounding surfaces and follow model-specific instructions