Need Help?
Call
Carries wastewater from your washer's drain pump to the standpipe or sink. Replace if cracked, kinked, clogged, or leaking to restore proper drainage.
Our washing machine door boot seal was getting moldy and causing odor problems. Cleaning tablets and bleach weren't helping so it was time to be replaced. While I had the top and front off I changed all the hoses that could be collecting soap scum and mold, all other wetted parts were removed and washed. The video on the door boot seal, and inlet valve assembly were extremely helpful in understanding how these parts are removed and reassembled. Although the door boot seal is the most visible... Read more
Replaces cracked, worn, or leaking internal water hose in your washer. Restores watertight water flow between drum and dispenser components.
I removed the top. I took a screwdriver and removed the plastic piece where the inlet hoses go. I twisted and removed the white pipe which had an arrow indicating how to (lock) it. Now I can remove the hose clamps that hold this hose in. The old hose has a hole, I don't know why. new hose goes in. tighten clamps. put everything back together. Read more
Connects sections of water tubing inside your refrigerator. Replace this adapter if cracked, leaking, or popping off to stop drips and water damage.
Ordered parts, watched videos and had it like new in five minutes! Read more
Replacement water supply tubing for refrigerators. Installs between water valve and ice maker or dispenser. Replace if original line is brittle, kinked, or leaking.
Routes water between internal dishwasher components. Replace this hose if cracked, leaking, or worn to prevent water damage and maintain proper flow.
Freezer drain tube that channels defrost water from the drain pan to the drip pan. Replace if cracked, leaking around the grommet, or causing floor leaks.
Replaced it Read more
Routes water from inlet valve to dispenser and ice maker. Replace if tube is cracked, leaking, kinked, or damaged to restore proper water routing.
The online video to change the water tube from the solenoid to filter was very helpful. It made the project straightforward. I had to replace the water tank tube as well. It was more challenging because there was no video for my model refrigerator (Frigidaire French Door) but a side-by-side unit video provided enough hints. The hardest part was getting the tube into the tank housing. The original water tank was smaller than the replacement. It required some serious persuasion to squeeze... Read more
Directs water from the inlet valve to the ice maker fill cup. Replace if cracked, kinked, frozen, or causing leaks inside your freezer compartment.
Watched the video that was available on your site appliancepartspros.com Was as easy as 1 2 3 ! Read more
Water inlet tube connects the water valve to your ice maker. Replace if cracked, leaking, or damaged. Installs at the back of your refrigerator.
I replaced the valve that turns the water flow on/off to the door and to the ice maker. It was allowing water to seep internally past it's seals. Replacing the valve solved both problems. Simple job, no more than 10 minutes start to finish.. Read more
Channels defrost water from the evaporator to the rear drain pan. Replace this tube if it's cracked, clogged, missing, or has become brittle over time.
Simply pushed the parts in place. Read more
Fan seal and drain tube kit for refrigerators. Includes rubber seal for condenser fan motor and drain tube. Replace if seal is torn or tube is cracked.
This is a flexible hose that connects the detergent or fabric softener dispenser to the wash tub, allowing dispensed products to flow into the drum during the wash cycle. If you notice detergent not dispensing properly, leaking near the dispenser area, or water pooling under the washer during the fill cycle, this hose may be cracked, clogged, or disconnected and needs replacement.
This is a flexible drain hose that connects the washing machine's pump to the household drain standpipe or laundry tub. It channels used wash and rinse water out of the machine during the drain and spin cycles. Replace this hose if you notice leaks at the connections, cracks or splits in the hose material, or if the washer is not draining properly due to a restricted or damaged hose.
Replacement fill tube that directs water from the inlet valve into your refrigerator's icemaker mold. Replace if cracked, damaged, or causing leaks.
Replaces a cracked, brittle, or damaged fluid transfer tube in your upright freezer. Restores secure connections and prevents leaks in the system.
Pressure tube connects washer tub to water level switch. Replace if cracked, kinked, or clogged to restore proper water level sensing in your laundry center.
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.