General Electric Tub Or Basket

This basket assembly is a genuine OEM replacement part sourced directly from the manufacturer for use in front-load washing machines. This assembly is part of the washer's drive system. It is on top of the clutch and transmission system. It contains the spin tube shaft and brake system for the spin basket. If the washing machine is making loud noises during the spin cycle or won't spin at all, the basket assembly should be replaced. A screwdriver, socket wrench set and ratchet, hammer, and spanner wrench are needed to make this repair. Disconnect the water and power to the washing machine. Wear work gloves when making these repairs. Make sure the machine is pulled away from the wall, and there is plenty of room to work while disassembling the machine. Remove the top console and then the washing machine cabinet. Take the tub ring and agitator off the machine. Remove the spin basket and drive block and release the drive block. Remove and replace the basket drive. Reverse the order and reassemble the washing machine. Reconnect the power and water. This basket assembly is sold individually. It is designed for washing machines manufactured by General Electric.

This part is the outer tub assembly for washing machines. It is often used in washer dryer combo units. This particular part houses the spin basket. It also holds the water during the washing cycles. In the event that the washing machine is leaking water, do a visual inspection of the outer tub to check for any cracks. If the tub has been damaged in any way, it will allow water to leak out. If this is the case, it will need to be replaced with this durable part. Make sure to unplug the washing machine from the outlet prior to attempting to replace this part. Wear work gloves to protect the hands.The tub is compatible with washing machines and washer dryer combo units that are manufactured by GE and Kenmore. It is a genuine OEM part this is sourced directly from the manufacturer. It is sold individually.

This 27" basket assembly replaces a damaged or worn dishwasher rack so you can securely load dishes and slide the rack smoothly. It restores stable support for plates, bowls and glassware and improves rack alignment. What it does:

• Provides the main lower/upper dish support surface so items sit securely during wash cycles
• Restores smooth in-and-out rack travel when original basket is bent or worn
• Prevents dishes from shifting or contacting each other due to damaged tines or walls
• Helps reduce clattering, scraping or poor wash coverage caused by a misshapen rack

• One 27" basket assembly as shown

• Disconnect power to the appliance and shut off the water supply before beginning any work
• Remove remaining dishes and carefully lift out the old basket; handle edges and glassware with care
• Align the basket on the rack rails and slide into position; verify rollers/wheels engage the track
• If the basket is large or awkward, have a second person assist to avoid dropping or damaging the part

This tub front is the front bulkhead that supports the dryer drum and front drum seal, restoring proper drum alignment and helping reduce rubbing, squeaks, and wear on rotating components. What it does:

• Supports the dryer drum at the front and provides a mounting surface for the front drum seal.
• Keeps the drum centered to allow smooth, even tumbling.
• Prevents clothes from catching or rubbing on the cabinet by maintaining correct drum clearance.
• Commonly replaced when the front surface is cracked, warped, or the seal area is damaged, causing noise or rubbing.

• One tub front (front bulkhead) as shown.

• Disconnect power to the appliance before starting any repair.
• Replacement typically requires removing the dryer front panel and drum; keep fasteners and note seal orientation.
• Use basic hand tools; some models may require lifting the drum slightly to set the tub front.
• If seals, bearings, or felt guides are worn, replace them at the same time for best results.

This tub rear assembly replaces the dryer drum's rear support and seal to restore proper drum alignment and airflow. It helps reduce rubbing noises and prevents air leaks that can affect drying performance. What it does

• Supports the drum's rear edge and maintains correct drum rotation alignment
• Houses the rear drum seal and helps direct airflow through the drum
• Reduces metal-on-metal rubbing, squeaks, and unusual rear-drum noises
• Helps prevent exhaust air leaks that can lengthen dry times or lead to hot spots

• One tub rear assembly as shown

• Recommended for installers or experienced DIYers; follow your appliance's service manual
• Disconnect power before beginning any repair
• Inspect adjoining seals, rollers, and fasteners while the unit is open and replace if worn
• Reassemble panels and verify proper drum rotation and spin before returning the dryer to service

This tub assembly is the washer's outer tub that holds water and supports the inner wash basket, restoring a watertight wash chamber and proper drum alignment for normal operation. What it does

• Houses and seals the wash water to prevent leaks during cycles
• Supports and centers the inner basket to reduce vibration and wobbling
• Helps maintain proper spin performance and load balance
• Can address symptoms such as visible leaks from the cabinet base, excessive vibration, or rubbing/metallic noises during spin

• Disconnect power and shut off water supply before starting any repairs.
• Installation typically requires removing the washer cabinet and separating the basket from the tub; have a second person available for handling.
• Inspect seals, gaskets, and suspension components while installing; replace any worn parts to prevent future leaks.