General Electric Agitator Parts

The Washer Agitator Coupler Kit is an OEM part for GE washing machines. This kit includes the coupler component that connects the agitator to the washing machine's transmission. It plays a pivotal role in the washing process by transmitting rotational force from the motor to the agitator, enabling it to move back and forth and effectively clean clothes.

Symptoms of a bad Washer Agitator Coupler include:

• The agitator failing to move or moving weakly during cycles, which can result in poorly washed clothes.
• Unusual noises from the washing machine during operation, indicating a mechanical issue.
• The agitator slipping or feeling loose when manually pushed or pulled.

Causes of a bad agitator coupler can include wear and tear from regular use, excessive load sizes that strain the agitator, or material fatigue that weakens the coupler over time.

This OEM replacement part is essential for restoring proper functionality to your GE washing machine and is also compatible with Hotpoint, RCA, and some Kenmore models.

The Agitator Coupler is an OEM part for GE washing machines. It connects the agitator to the drive shaft, enabling the agitator to move and clean clothes effectively during the wash cycle.

You should replace the agitator coupler if it becomes damaged or worn out. Causes of a bad agitator coupler can include excessive load sizes, wear and tear from repeated use, or damage from foreign objects caught in the washer.

Symptoms of a bad agitator coupler include:

• The agitator not moving or spinning properly
• Unusual noises during the wash cycle
• Poor cleaning performance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a genuine OEM replacement agitator coupling part for washing machines. The role of an agitator coupler is to act as a connector between the agitator and the agitator shaft in the washing machine.If a coupler is damaged, there are some common symptoms that may be noticeable including: a grinding sound during the wash cycle, the washer refusing to agitate or spin, or the washing machine shaking and moving during the wash cycle. Other signs may include very wet clothes or the motor spinning without the drum rotating. Above all, the most common symptom is simply a loud, unpleasant noise while the machine is operating.This replacement agitator coupling part is compatible with General Electric, RCA, JCPenney, and Hotpoint washers. This coupling is used specifically for 20 spline drive shaft transmissions. The agitator coupling piece comes with instructions to make the installation process as quick and simple as possible.

This small, flat washer belongs in the lint filter assembly of the washer. It maintains proper spacing and helps seal the area so the filter stays secure and can capture lint as designed. What it does:

• Seats under the lint filter fastener/cap to ensure a secure fit
• Helps seal the lint filter area to reduce drips or seepage
• Keeps the lint filter properly positioned during wash and spin
• Common symptoms: water dripping at the lint filter, loose/rattling filter, increased lint carryover

• One lint filter washer

• Disconnect power and turn off water supply before servicing
• Access the lint filter per your model's instructions; remove the cap/fastener and old washer
• Clean mating surfaces; install the new washer and reassemble—do not overtighten
• Run a short fill/agitate test and check for leaks around the filter area

This washer agitator assembly mounts on the drive shaft and creates the back-and-forth wash action that moves laundry through water and detergent. Replacing a worn or cracked agitator restores proper turnover and cleaning performance.

• Attaches to the drive shaft/transmission to produce the oscillating wash action
• Circulates clothes for even cleaning and reduced tangling
• Replace if the washer won't agitate, the agitator free-spins or slips, laundry stays on top, or it's visibly cracked/loose
• Can also help address squeaking, clicking, or grinding caused by a damaged agitator

• Unplug the washer and turn off water supply; wear cut-resistant gloves
• Remove the dispenser/cap if present, then the inner cap; take out the retaining bolt or nut
• Lift the old agitator straight up; if stuck, rock it gently to free it without damaging the tub
• Align the new agitator with the drive splines, press down fully, reinstall fastener and cap, then run a short cycle to ensure proper agitation

The Infusor Assembly is an OEM part for GE washers. It is responsible for efficiently infusing water into the tub during wash cycles. With a sophisticated internal design, the infusor helps to fully saturate laundry with water in a uniform, controlled manner.  

Causes of a bad infusor assembly can include mineral or limescale buildup interfering with water flow, cracks or breaks in the plastic from repeated use, or damage from large items lodged inside.

Symptoms of a bad infusor assembly include:

• Uneven or inadequate water levels in the tub during fill  
• Reduced water pressure 
• Leaks or water dripping from the assembly area

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.