General Electric Baffle Parts

Mounted inside the dryer drum, this replacement baffle lifts and separates laundry as the drum turns to improve airflow and even drying. Replacing a cracked or missing baffle restores quiet, effective tumbling and helps prevent fabric damage. What it does:

• Lifts and tumbles clothes to promote even drying and airflow
• Helps prevent clumping or items sticking to the drum
• Common failure signs: thumping noise, poor tumbling, long dry times, or a loose/missing baffle
• Restores balanced operation inside the drum when replaced

• 1 drum baffle

• Disconnect power; allow the dryer to cool before servicing
• Access the drum per your model (remove top/front panel as needed)
• Align the new baffle with the drum's mounting holes and secure with existing hardware; tighten all fasteners
• Hand-rotate the drum to verify clearance before reassembly and testing

The Baffle is an OEM part for GE electric dryers. Located inside the dryer drum, it helps separate clothes and improves air circulation during tumbling cycles. 

To achieve consistent drying times, a dryer relies on balanced airflow penetrating all areas where clothes reside. The baffle creates divisions to ensure air fully surrounds each layer instead of bypassing some areas. Its raised ridges also help tumbling action by preventing clumps of clothes.

Symptoms of a bad baffle include:

• Slow, uneven drying requiring extra cycles  
• Certain areas of clothes remain damp while others over-dry
• Reduced airflow output from the vent due to blockage

Replacing it with the genuine GE baffle plate restores optimized air distribution within the drum. The part is also compatible with some Kenmore dryers that use GE elements.

A replacement broiler baffle that positions and shields the oven broil burner to promote safer, more consistent broiling and help prevent direct flame contact with the oven cavity. Restores proper broil heat direction and reduces soot buildup. What it does

• Directs and shields the broil burner flame for more even broiling.
• Protects the oven interior from direct flame and excessive soot/heat exposure.
• Helps prevent flare-ups and uneven browning caused by warped or damaged baffles.
• Common symptom: uneven broiling, visible soot, or flame misdirection around the broiler.

• One broil baffle

• Disconnect power and allow the oven to cool completely before servicing.
• Remove oven racks to access the broiler area; follow OEM diagram for proper orientation and fit.
• Use basic hand tools as required and avoid forcing the part; replace if warped or damaged.

A lower-rack lifter that secures and guides the dishwasher's bottom rack for smooth movement and correct positioning. Restores proper rack height and alignment so dishes load, wash, and drain without interference. What it does:

• Supports and raises/lowers the lower dish rack to the correct operating position
• Keeps the rack aligned on its track to prevent binding or rough movement
• Reduces rack rubbing against tub walls and helps ensure proper spray-arm clearance
• Commonly replaced when the rack drops, won't stay level, or moves unevenly

• Disconnect power and turn off water supply before servicing dishwasher
• Remove lower rack to access and replace the lifter; no special tools typically required
• Verify proper seating on the rack guide and smooth operation before returning unit to service
• If other rack components are damaged, inspect for worn wheels or track issues

This drum vane replaces a damaged or missing dryer drum lifter that helps lift and tumble clothes for even drying and gentle fabric movement. Restores proper tumbling and reduces fabric snags when installed correctly. What it does:

• Lifts and guides clothing as the dryer drum rotates to promote even tumbling.
• Prevents clothes from bunching or staying in one spot during a cycle.
• Reduces scraping, thumping, or uneven noise caused by a broken or missing vane.
• Helps maintain proper drum rotation and load distribution.

• Disconnect power to the appliance before starting any repairs.
• Access the drum per your model's service instructions (front panel or cabinet removal may be required).
• Align the vane with the drum mounting points and secure using the original fasteners; replace damaged clips or screws if needed.
• After reassembly, run a short no-heat cycle to ensure smooth drum rotation and correct installation.

This convection baffle directs airflow in the oven to promote even baking and protect internal components from direct heat. It restores proper air circulation and helps eliminate uneven cooking or hot spots. What it does:

• Guides convection fan airflow for more consistent oven temperatures
• Shields the fan motor and internal electronics from heat and debris
• Helps reduce hot spots or uneven baking when damaged or missing
• Replaces a warped, cracked, or missing baffle that rattles or interferes with the fan

• One convection baffle (single replacement part)

• Designed for rear oven mounting; verify orientation before fastening
• Disconnect power to the appliance at the breaker before starting work
• Minimal tools typically required; handle edges carefully to avoid cuts