Maytag Heating Element

This heating element kit replaces a failed heating element to restore normal heating in compatible laundry or cooking appliances. It provides the core heating component needed to get your appliance producing heat again. What it does:

• Replaces a damaged or burned-out heating element that stops the appliance from heating
• Helps resolve symptoms like no heat, weak or inconsistent heating, or tripped thermal cutouts
• Restores the appliance's ability to reach and maintain operating temperatures for normal cycles
• Works as the direct replacement heating component shown in OEM parts listings

• One heating element kit as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock risk
• Handle the element and terminals carefully to avoid bending or damaging mounting tabs
• Confirm correct terminal connections and secure mounting per the appliance wiring diagram

This heater is the electric heating element that warms air or water so your appliance reaches the proper operating temperature. Replacing a failed heater restores normal heating performance and helps cycles finish correctly. What it does:

• Generates heat needed for normal drying or wash cycles
• Allows the appliance to reach and maintain operating temperature
• Common symptom: appliance runs but does not heat or takes much longer to finish
• Common symptom: cycles complete without expected temperature or sanitizing action

• One replacement heater element

• Turn power to the appliance off at the breaker before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Follow the appliance service manual for panel removal and wiring re-connection

This broil element replaces the oven's top heating element to restore browning and broiling performance. It provides the heating surface used during broil cycles so food cooks from the oven top as intended. What it does:

• Heats from the top of the oven during broil cycles to brown and crisp foods
• Restores heat when the broil function produces little or no heat
• Replaces elements that are visibly burned, broken, or open
• Works with ovens that use a tubular U-shaped upper heating element

• Disconnect power to the range at the breaker or unplug before starting.
• Allow the oven to cool completely and wear gloves to avoid sharp edges.
• Remove mounting screws and disconnect element terminals; install in reverse order.
• Verify secure connections and test the broil cycle after reassembly.

This surface heating element replaces a failed top burner to restore cooking heat on compatible electric ranges. It provides a direct, reliable heating source for everyday stovetop cooking. What it does:

• Heats cookware when the range burner control is turned on
• Replaces elements that no longer glow or produce heat
• Fixes uneven heating or intermittent burner operation
• Works when visible damage, breaks, or burned-out coils are present

• One surface heating element

• Disconnect power to the range before starting any repair
• Remove the old element by lifting and unplugging or detaching from the terminal block per your model's service instructions
• Handle the element carefully to avoid bending terminals or damaging the cooktop surface
• Restore power and test the new element on low heat settings after installation

This genuine surface heating element replaces a damaged or non-heating top burner so you can restore even cooking and safe stovetop use. Designed to match factory fit and function for compatible electric ranges. What it does:

• Heats cookware by providing a working coil burner for stovetop cooking
• Replaces elements that are visibly damaged, cracked, or won't heat
• Helps resolve burners that heat intermittently or not at all
• Restores normal temperature control when the element is the faulty component

• Disconnect power to the range before servicing to avoid shock hazard
• Remove burner trim or receptacle as needed; element typically lifts out of the socket
• Inspect the terminal/socket for damage and replace if corroded or loose

The Dryer Heating Element is an essential component designed to restore the efficiency and performance of your dryer. This genuine OEM part ensures reliable heating, allowing your clothes to dry quickly and evenly every time. Crafted to meet SamsungGÇÖs high standards, the Dryer Heating Element guarantees a perfect fit and seamless integration with your appliance. By replacing a faulty or worn-out heating element with this quality part, you can enhance your dryerGÇÖs functionality and extend its lifespan. Customers will appreciate the ease of installation and the immediate improvement in drying performance, reducing energy consumption and saving time. Whether your dryer has been struggling to reach the desired temperature or failing to dry clothes completely, the Dryer Heating Element offers a dependable solution. Trust in this genuine OEM part to maintain the optimal operation of your Samsung dryer, providing peace of mind and a better drying experience.

This surface heating element restores dependable heat to a burner on your range or cooktop. Also called a surface burner or top burner element, it delivers the cooking temperature for that zone when the control sends power. What it does:

• Generates heat for one cooking zone on the cooktop
• Common symptoms: burner won't heat, heats unevenly or only partway, takes too long to heat, or shows visible damage
• Helps isolate a single-burner failure when other surface elements still work
• Replaces a damaged or open element to restore consistent heating

• 1 surface element

• Disconnect power at the breaker and allow the cooktop to cool completely
• Access the element per your model (remove burner pan or lift the glass top)
• Note/photograph wiring and transfer any brackets or clips; move wires one at a time to matching terminals
• Ensure the element sits flat and all connections are secure before reassembly and testing

This radiant surface element restores proper heat to a glass-ceramic cooktop burner. When the original element burns out or develops hot spots, replacing it brings back steady, controllable heat for everyday cooking. What it does:

• Generates heat for the selected cooking zone beneath the glass top
• Works with the surface control to cycle on/off and regulate temperature
• Helps deliver even heating across cookware
• Common fix for: burner won't heat, heats slowly or unevenly, only part of the burner heats, visible damage on the element

• 1 radiant surface element

• Disconnect power at the breaker and allow the cooktop to cool completely
• Support and handle the glass top carefully to avoid damage
• Note wire locations and transfer any mounting hardware from the old element
• After reassembly, test the burner on low and high settings

Bottom-mounted bake element that provides the primary heat for baking. Replace when burned out or damaged to restore proper preheat and even baking.

• Supplies radiant heat from the bottom of the oven during Bake cycles
• Helps the oven reach and maintain the set temperature
• Common failure signs: no heat in bake, slow preheat, uneven results, or visible cracks/blistering on the element
• A shorted element may trip the household circuit breaker when Bake is selected

• Disconnect power at the breaker or unplug; allow the oven to cool completely
• Remove racks; take out the element's mounting screws, gently pull it forward, and move the two wires to the new element one at a time using insulated pliers
• Don't let wires slip back through the rear panel; inspect terminals for heat damage, reassemble, restore power, and test preheat

This broil element is the oven's upper heating element that provides direct, high-heat cooking for broiling and browning. It restores the oven's broil function so foods brown evenly and cook from above. What it does:

• Heats the top of the oven cavity to produce direct radiant heat for broiling and browning
• Replaces a damaged, burned out, or non-heating upper oven element
• Commonly used when broil cycles fail or food doesn't brown on top
• Works with ovens that use a straight tubular broil element design

• Disconnect power to the range at the breaker or unplug before starting
• Element mounts with two screws accessible from inside the oven; handle glass and trim carefully
• Verify electrical connections are tight and correct before restoring power

This surface heating element replaces a damaged or nonworking stovetop burner to restore even heat for cooking. It fits most compatible electric ranges and gives you a direct replacement for a faulty top burner element. What it does

• Provides the heating element that transfers heat to cookware on the cooktop
• Restores proper burner heat when an element no longer warms or cycles correctly
• Helps eliminate uneven cooking or intermittent on/off heating from a failed element
• Works as a direct replacement for the corresponding top/burner element on compatible ranges

• Disconnect power to the range before removing or installing the element to avoid electrical shock
• Pull the element straight out of the terminal block; avoid bending terminals or damaging the receptacle
• Inspect the burner receptacle for damage and replace if corroded or loose
• After installation, test the element on low and high settings and watch for proper operation

This replacement grill (broil) heating element restores high, direct heat for broiling and browning in the oven. It lets you crisp and brown food quickly so broil functions work like new. What it does:

• Provides the intense direct heat required for broiling and grilling
• Replaces a burnt-out or broken upper oven element to restore broil performance
• Helps eliminate problems like food not browning or uneven broiling
• Visible breaks, blisters, or open circuits on the element are common failure signs

• Disconnect power to the appliance before starting any repair to avoid shock
• Handle element carefully to avoid bending or damaging the terminals
• Reconnect wiring securely