Gas Conv Kit Parts

This orifice hood directs and stabilizes the natural gas flow to a single range/oven burner for reliable combustion and consistent heat. It helps restore proper burner performance when the hood is damaged or worn. What it does:

• Guides natural gas from the orifice to the burner for steady flame and efficient combustion
• Commonly used when burners have weak, uneven, or unstable flames
• Can resolve ignition problems tied to damaged or misshapen hoods
• Supports correct flame shape to reduce yellow tipping or sooting

• Turn off gas supply and electrical power before servicing; follow local codes
• Install on the burner tube/orifice assembly as shown in your service manual
• Inspect surrounding fittings and gaskets; replace any damaged components
• After installation, check for gas leaks and proper burner operation

Natural gas. Main burner.

Natural gas. High altitude. Simmer burner.

The LP Conversion Kit with Instructions is an OEM replacement part for Frigidaire gas appliances. This kit is designed to convert a natural gas appliance to operate with liquid propane (LP) fuel. It includes all necessary components and instructions for a safe and effective conversion, ensuring optimal performance with propane.

Causes for needing an LP conversion kit typically include a change in the type of gas supply, such as moving to an area where propane is the primary fuel source. Proper installation is crucial to maintain safety and efficiency during operation.

Symptoms indicating the need for this kit include:

• The appliance is not functioning due to an incompatible gas type
• Incorrect or inconsistent burner flames
• Relocation to an area with propane-only gas service

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The LP Conversion Kit is an OEM part for GE ranges. This kit allows the range to run on either liquid propane (LP) gas or natural gas and includes all necessary components for conversion.   

The LP Conversion Kit contains burner tubes, valves, and seals to adapt the range safely to run on liquid propane. Installation involves replacing components and adjusting gas pressure and burner flames accordingly.

Causes of a bad conversion can include worn burner tubes, seals, or valves that no longer properly regulate gas flow. 

Symptoms of an improperly converted or failing kit include:

• Incomplete ignition of burners   
• Unstable burner flames
• Gas leaks around valves or tubes
• Abnormal sounds or smells from the gas system

Replacing with this genuine OEM GE part ensures safe, reliable operation whether using natural gas or liquid propane. This conversion kit is also compatible with some Hotpoint, KitchenAid, and Kenmore ranges.
 

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

The LP Conversion Kit is an OEM replacement part for Whirlpool cooktops. It allows you to convert your cooktop from natural gas to LP gas, ensuring compatibility with your available fuel source. It includes all the necessary parts and instructions to safely and effectively convert your cooktop.

Causes of needing a conversion kit include:

• Switching from natural gas to LP gas as the fuel source
• Moving to a new location with different gas supply requirements

By using this LP conversion kit, you can enjoy the versatility and convenience of using LP gas on your Whirlpool cooktop.
This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Conversion Kit is an OEM part for Whirlpool gas ranges and cooktops. It allows the unit to be converted from natural gas to liquid propane fuel. The kit includes all 5 orifices.

Causes of needing a new conversion kit include a change in fuel source from natural gas to propane or vice versa. It may also be required if any gas system parts like valves or regulators become damaged or fail inspection. 

Symptoms of improperly converted or missing conversion components include:

• Incorrect burner flame pattern or color 
• Inefficient or irregular heating 
• Gas smell 
• Visible yellow flame instead of blue

This Whirlpool OEM kit is compatible for use on Whirlpool, Maytag, KitchenAid, and some Jenn-Air and Kenmore models.

The LP Cnvrsn-Kit is an OEM part compatible with Whirlpool ranges. It allows a range to use liquid propane gas instead of natural gas. The kit includes all necessary components to safely convert the range.

Symptoms of a bad conversion kit include:

• Gas leaks around pipe connections 
• Unable to light burners or ovens due to issues with gas flow
• Changes in flame color or uneven cooking performance

Causes of a bad conversion kit can include damaged or worn-out components that no longer regulate gas pressure properly or provide a secure connection. 

This replacement kit is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Conversion Kit is an OEM component specifically designed for LG gas ranges. This kit allows compatible electric and gas models to be converted between each type of fuel source.

Causes of needing a conversion kit include changing preferences between gas and electric cooking needs. Proper conversion maintains safety and performance. 

Symptoms of an incompatible fuel type include:

• Inability to ignite burners on a gas range  
• Lack of heating elements for an electric range
• Error codes or hazardous pilot light issues

This OEM LG part is also compatible with Sears/Kenmore ranges. Converting the fuel type with an official kit ensures the appliance operates as intended with its new power source. Dedicated expertise and parts maximize safety and efficiency.
 

This ignitor orifice assembly routes gas to the oven igniter so burners light reliably. It replaces a damaged or clogged orifice to restore consistent ignition and safe burner operation. What it does:

• Directs gas flow from the manifold to the igniter/pilot so the burner can light
• Helps restore proper ignition when the burner sparks but fails to light
• Replaces corroded, clogged, or damaged orifice hardware that can weaken flame
• Works with standard oven/range ignition systems that use a separate orifice assembly

• One ignitor orifice assembly

• Turn off gas supply and disconnect power before attempting service
• Basic hand tools required; avoid overtightening fittings to prevent damage
• Check for gas leaks with a non-corrosive leak detector after installation

This replacement nozzle assembly directs and controls water flow in the appliance, restoring proper delivery to the dispenser or ice-making components. It replaces a worn or damaged nozzle to help stop leaks and restore consistent flow. What it does

• Directs water from the supply line to the dispenser or ice-making fill tube.
• Helps stop spraying or leaking when the original nozzle is cracked or blocked.
• Restores steady water flow when the dispenser produces weak or intermittent water.
• Fits into the original mounting and seals the water path when properly installed.

• One nozzle assembly as shown.

• Turn off water supply and unplug the appliance before starting work.
• Inspect surrounding seals and tubing; replace any damaged parts to ensure a proper seal.
• Hand-tighten fittings and check for leaks after restoring power and water.