Gas Conv Kit Parts

This LP conversion kit lets a compatible gas range use liquid propane by replacing factory orifices and related components for correct burner performance and safe operation after fuel changeover. What it does:

• Replaces orifices and parts needed to change burners from natural gas to LP
• Ensures proper flame shape and heat output when using propane
• Prevents poor combustion, uneven heating, or hard-to-light burners after conversion
• Enables safe, manufacturer-specified fuel change when installed per instructions

• Read and follow the included instructions exactly; only install on appliances specified by the manufacturer
• Shut off the gas supply and electrical power before beginning work
• After installation, check all fittings for leaks and verify proper flame and operation before regular use

The 5 Orifice LP Conversion Kit is an OEM part for Whirlpool gas ranges. It allows you to convert your range from natural gas to liquid propane fuel, providing flexibility in fuel options for your cooking needs.

Symptoms of a bad LP orifice can include:

• Incorrect orifice type for new gas hookup
• Inconsistent flame or yellowish flame color
• Unusual odors or gas leaks

Restore your gas range by using this genuine OEM LP Conversion Kit. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Orifice Holder is an OEM part for Whirlpool gas cooktops. This part is responsible for securely holding the orifice, which controls the flow of gas to the burners. The gas cooktop orifice holder ensures proper gas flow and safe operation of the burners. It is designed to withstand high temperatures and regular use.

A bad orifice holder can occur due to wear and tear over time, exposure to heat, or accidental damage. If you notice symptoms such as gas leaks, weak flame, or inconsistent burner performance, it may be time to replace this part.

Symptoms of a bad orifice holder include:

• Gas leaks
• Weak flame
• Inconsistent burner flame

Restore your Whirlpool gas cooktop by replacing the worn or damaged orifice holder with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This orifice spud controls gas flow to a stove or range burner so the flame lights reliably and burns evenly. It's a small but critical gas-delivery fitting for proper burner performance. What it does:

• Directs and meters gas from the valve to the burner for a steady flame
• Restores normal ignition when a damaged spud causes weak or uneven flames
• Helps correct burners that stay low or fail to sustain a flame
• Works with the burner and valve assembly to maintain consistent heat output

• Turn off gas supply and power to the appliance before servicing
• Replace only with the exact part number or verified equivalent for safe operation
• Thread by hand then tighten to manufacturer torque—do not overtighten
• After installation, check for leaks with a safe leak-detection method;

The LP Conversion Kit is an OEM part for Whirlpool gas cooktops. This kit allows a range designed for natural gas to be safely converted for use with liquid propane gas.

The conversion kit includes all necessary components to modify the gas valve, burner heads, and airflow to accommodate propane fuel. This ensures proper gas-air mixture and optimal combustion when operating on liquid propane.

Causes of needing conversion include switching to propane fuel when the range was originally set up for natural gas.

Symptoms of needing an LP conversion include:

• Inability to ignite burners or oven pilot light on propane
• Yellow burner flames and decreased heat output
• Gas smell from the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This ignitor orifice assembly routes and meters gas to the oven burner ignitor so the oven lights reliably and reaches cooking temperature. It's a direct-replacement part used when ignition is inconsistent or the burner won't light. What it does:

• Controls gas flow from the manifold to the oven burner ignitor for proper ignition
• Helps ignition occur quickly and consistently so the oven can reach set temperatures
• Common symptoms: oven won't light, delayed or intermittent ignition, or weak/uneven heating
• Works with the oven's ignition system; replaces worn or damaged orifice assemblies

• Turn off electrical power and shut off the gas supply before starting work
• Use proper tools; do not force fittings or over-tighten connections
• After installation, restore power/gas and test the oven for proper ignition and operation

LP orifice / size #1.18 (16k)

LP orifice / size #1.09 (14k)