Range / Cooktop / Oven Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9758060
Burner stuck on high heat or only working at maximum setting? This infinite control switch regulates burner temperature. DIY-friendly, 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
One cooking element would only go on high Aaron H. • Sumas , WA • February 13, 2017
Replaced the switch in the back panel, SUPER easy!!
Read more
More
$65.74
- Compare At:
-
$78.23
- You Save:
-
$12.49
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293827
Burner won't turn on or heat properly? This range burner control switch restores heat level adjustment. Moderate DIY with wiring terminal labels.
Do-It-Yourself Stories from Customers like You
Large burners would go to high when turned on Charles H. • Prestonsburg , KY • October 25, 2016
Replaced infinite switch on large burners and just went ahead and replaced the infinite switch on the small burners while I had it apart and installed all new surface elements as well...parts were shipped the next day and I received them within 2 days...
Read more
More
$80.26
- Compare At:
-
$96.31
- You Save:
-
$16.05
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917724
Burner stuck on high or won't adjust temperature? This infinite switch controls heat levels for surface elements. Common DIY fix, 15-30 minutes.
More
$78.27
- Compare At:
-
$93.92
- You Save:
-
$15.65
Genuine Ge part
By: Ge
Part Number: WB23K5027
Burner won't stay at set temperature or jumps to high? The infinite switch controls power to heating elements. Easy DIY repair, takes under 30 minutes.
Do-It-Yourself Stories from Customers like You
Control element burnt out Arthur S. • Leesburg , VA • September 25, 2017
Very easy replaced switch.
Read more
More
$108.95
- Compare At:
-
$128.56
- You Save:
-
$19.61
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
$89.31
- Compare At:
-
$105.39
- You Save:
-
$16.08
Genuine Bosch part
By: Bosch
Part Number: 00189968
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
- Failure of the fan or vents to engage during cooking
- Variable or inconsistent fan speeds that don't adequately vent smoke
- Electrical shorting or sparking noises from within the hood control unit
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
Do-It-Yourself Stories from Customers like You
Thermador cvs36r cook'n'vent vent won't go down Martha M. • Los Altos , CA • January 17, 2015
I replaced the switch
Read more
More
$132.31
- Compare At:
-
$156.13
- You Save:
-
$23.82
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293825
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$78.95
- Compare At:
-
$93.95
- You Save:
-
$15.00
Genuine Ge part
By: Ge
Part Number: WB24X29364
Burner stuck on high or can't regulate heat? This infinite switch controls cooktop element temperature. DIY-friendly repair in under an hour.
Do-It-Yourself Stories from Customers like You
Element temperature would only work on high and there was no adjustment to the heat Joann S. • Lennox , SD • October 26, 2015
Ordered the element control for my dual front right burner and a infinite heat switch for my left front large single burner. Removed cooktop and followed the instructions video given with the parts online. Process was simple and everything on my cooktop is working like it is brand new. The only problem I have is with the online chat, save time by calling in and talking to someone as the people I talked to online (4 of them) are in such a hurry to get to the next call they gave conflicting part...
Read more
More
$81.56
- Compare At:
-
$97.87
- You Save:
-
$16.31
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
$83.95
- Compare At:
-
$99.90
- You Save:
-
$15.95
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185286
Burner stuck on high or won't heat? This infinite switch controls electric cooktop burner temperature. Moderate DIY repair restores heat control.
Do-It-Yourself Stories from Customers like You
Right front burner was out Jimmie L. • Pelion , SC • August 29, 2016
So I ordered the burner and Ithe switch because I wasn't sure what part was defective. I pulled the oven out and I removed the 6 1/4 inch screws on each side of the glass top as well as the 2 Phillips head screws on the back, removing the 2 1/4 screws on the shield on the back gIves you easier access to them, then lifted the glass top up on the front to access the switch and burners. Make sure you turn the power off before beginning this process. When lifted up the wires connected to the...
Read more
More
$158.77
- Compare At:
-
$188.94
- You Save:
-
$30.17
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10167742
If your range burner stays on high and won't adjust temperature, the infinite switch likely failed. This control switch regulates element power levels.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$75.35
- Compare At:
-
$89.67
- You Save:
-
$14.32
Genuine Whirlpool part
By: Whirlpool
Part Number: W10911303
Burner won't heat or stuck on one temperature? This infinite switch controls your range surface element heat levels. DIY repair restores precise cooking.
Do-It-Yourself Stories from Customers like You
Oven fan code & all knobs needed to be replaced. Craig L. • Avon , CO • November 08, 2020
I was able to clean the Oven Temp Sensor with 99% alcohol. Then replaced All switches (after breaker was isolated). Put it all back the way I found it. Turned on breaker. Tested all functions and had no reports of Fan Code re-appearing since.
Read more
More
$73.95
- Compare At:
-
$88.00
- You Save:
-
$14.05
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
$120.56
- Compare At:
-
$143.47
- You Save:
-
$22.91
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304526190
Burner not heating or stuck on? This surface element switch controls power to individual cooking elements. Moderate DIY repair requires lifting cooktop.
More
$69.95
- Compare At:
-
$83.24
- You Save:
-
$13.29
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9762215
If your range burner won't respond to settings or produces erratic heat, this surface element infinite switch restores precise temperature control.
Do-It-Yourself Stories from Customers like You
Blew the oven switch! i hate it when that happens! Daniel F. • Miami , FL • July 18, 2015
First and foremost I UNPLUGGED THE OVEN!. I'll pass on the early morning SHOCK THERAPY! Second, I unscrewed aluminum protection plate from back of oven. Next, I unplugged the two connections behind the oven switch. Then I removed the plastic switch from the front and unscrewed the two screws that secured the oven switch to the oven. Once you've completed all these steps you take your new oven switch and do everything again but in reverse order. Hope this was informative, direct, and that your...
Read more
More
$172.74
- Compare At:
-
$203.83
- You Save:
-
$31.09
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9763762
If your cooktop burner won't heat or won't adjust temperature, the infinite switch likely failed. This part regulates burner power. DIY repair in 30-45 minutes.
Do-It-Yourself Stories from Customers like You
Broken cook top switch Joseph M. • Scottsdale , AZ • January 27, 2015
Removed control panel and replaced broken switch. Much easier then expected.
Read more
More
$141.22
- Compare At:
-
$168.33
- You Save:
-
$27.11