Refrigerator Parts

The Compressor Run Capacitor is an OEM replacement part for Frigidaire refrigerators. This electrical component is essential for providing the necessary torque to start and maintain the operation of the compressor motor, which is responsible for cooling the refrigerator.

Symptoms of a failing compressor run capacitor include:

• The refrigerator not running or cooling properly
• The compressor failing to start or running intermittently
• Humming or buzzing noises coming from the compressor area

Causes of needing to replace the compressor run capacitor can include normal wear over time, exposure to high temperatures or electrical surges, or physical damage to the capacitor itself.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore refrigerator models. 

The Water Inlet Valve is an OEM part for Frigidaire refrigerators. It is designed to manage the flow of water to the ice maker and water dispenser. This solenoid-operated valve responds to commands from the refrigerator's electronic control, opening to allow water in and closing to stop the flow, ensuring proper operation of both ice production and water dispensing functions.

Symptoms of a bad Water Inlet Valve include:

• No water being dispensed or ice being made
• Leaking water at the back or bottom of the refrigerator
• An unusually noisy operation when the valve is activated

Causes of a bad water inlet valve can include mineral buildup, which may obstruct the flow of water, mechanical failure of the solenoids, or wear and tear that leads to leaks or failure to open/close properly.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Refrigerator/Freezer Door Handle Kit is an OEM replacement part specifically designed for GE refrigerators. This kit includes handles for both the refrigerator and freezer doors, providing a comfortable and efficient opening and closing of the refrigerator and freezer doors, ensuring easy access to your food and beverages. 

Causes of a bad Door Handle can include physical damage from impacts or excessive force, wear and tear that leads to loosening or breaking over time, and normal use, which can cause the handles to crack or become discolored.

Symptoms of a bad Door Handle include:

• Loose handle that makes opening the door difficult 
• Cracked or broken handle 
• Discoloration or wear

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Refrigerator Meat Pan Hanger, Right Side is an OEM part for Frigidaire refrigerators. It is specifically designed to support the meat pan on the right side, ensuring it hangs securely and slides smoothly when accessed. This component is crucial for maintaining the structural integrity of the refrigerator's internal organization, allowing for efficient storage and easy access to meats and other perishables.

Symptoms of a bad Refrigerator Meat Pan Hanger include:

• The meat pan drooping or not holding in place,
• Difficulty in sliding the pan in or out,
• Visible damage or breakage of the hanger.

Causes of meat pan hanger failure typically involve excessive weight in the pan, frequent and forceful use, or physical impacts that could weaken or break the hanger.

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

The Water Tank Assembly is an OEM part for GE refrigerators, designed to store and chill water before it's dispensed through the refrigerator's water dispenser. This integral component ensures that you have immediate access to cold, fresh water without the need to open the refrigerator, helping to conserve energy and maintain the internal temperature. 

Over time, the water tank assembly can experience issues such as leaks, cracks, or the buildup of contaminants, all of which can affect the quality and taste of your water. 

Symptoms of a bad Water Tank Assembly include:

• Leaks or puddling water beneath the refrigerator
• A noticeable drop in water flow from the dispenser
• Unpleasant taste or odor in the dispensed water
• Visible cracks or damage to the tank or its connections

This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Deli Drawer Shelf Frame is an OEM part for Whirlpool refrigerators. This frame serves as the structural support for the deli drawer, holding it in place and providing a smooth surface for the drawer to slide in and out easily. Additionally, it acts as a shelf for items stored above the drawer, maximizing space utilization within the refrigerator. 

Symptoms of a bad Deli Drawer Shelf Frame include:

• Cracks or breaks in the frame that compromise its structural integrity.
• The drawer sagging or sticking due to a misaligned or damaged frame.
• Difficulty in sliding the drawer in and out smoothly.
• Unstable storage as items on the shelf above the drawer shift or fall.

Causes of a bad shelf frame can include overloading the drawer or shelf with too much weight, general wear and tear from frequent use, or environmental factors such as moisture and temperature changes that can warp or degrade the materials.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

NOTE: The small wire connector features three wires for easy setup. If your original ice maker has 6 wires then order part number AEQ73110205.

The Ice Maker Assembly Kit is an OEM replacement part for LG French door refrigerators. As a comprehensive repair solution, it includes the ice maker, drive motor, assembly, and all necessary mounting hardware. 

Symptoms of a bad ice maker assembly include:

• Inability to produce cube ice automatically  
• Grinding noise coming from the ice maker area
• Ice not dispensing when the oven is engaged
• Error codes or malfunctions shown on the display

Causes relate to high demand on icemaker parts like mold heating elements or drive motors which cycle 100 times per day. Constant use exceeding 10 years contributes to breakdown in precise fit and function of components.

The Defrost Timer is an OEM replacement part for Frigidaire upright freezers. It serves as a crucial component responsible for regulating automatic defrost cycles.

Causes of a faulty defrost timer relate to 20,000+ hours of constant exposure to freezer temperatures as low as -10 degrees Fahrenheit. Such extremes can compromise electrical switching mechanisms over prolonged usage periods.

Symptoms of a failed defrost timer include:

• Inability to initiate automatic defrost modes  
• Excessive ice and frost accumulation inside cabinet
• Warm areas detected due to impaired fan circulation
• Diagnostic codes indicating defrosting problems

This genuine Frigidaire replacement part is compatible with Kelvinator and some Kenmore units as well.

The Door Shelf Bin is an OEM part for Whirlpool refrigerators. It provides storage space on the refrigerator door, allowing for easy organization and access to frequently used items like condiments, beverages, and smaller containers. The bin measures approximately 17" wide x 7" deep x 4" high.

You should replace this door shelf bin if it becomes cracked, broken, or loses its ability to securely hold items. Over time, regular use and the weight of stored items can cause the plastic to weaken or break.

Symptoms of a bad door shelf bin include:

• Cracks or visible damage
• Difficulty in securing items within the bin
• The bin detaching or falling off the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This freezer door gasket is an OEM replacement part for Frigidaire refrigerators. The gasket measures approximately 28" wide x 18" long. This gasket is a perfect fit for your refrigerator's inner door panel.

Symptoms of a bad freezer door gasket include:

• Difficulty keeping interior cold temperatures below 0°F  
• Frost buildup around top and sides of door seals
• Defrosts required increasing in frequency
• Visible air gaps noticeable along gasket perimeter

Causes of a bad freezer door gasket can include material breakdown due to hundreds of door opening and closing compression cycles over time developing small cracks in the rubber. Spills along bottom edges may promote seal deterioration if not cleaned promptly.

This genuine Frigidaire replacement gasket is compatible with other brands such as Electrolux and Kenmore as well 

NOTE: To achieve a smooth installation, simply soak the gasket in warm water or use a hair dryer on low heat to eliminate any folds or creases.

The Crisper Cover Frame is an OEM part for Frigidaire refrigerators. This parts serves as the structural frame for the crisper drawer section of the refrigerator, providing support and a level surface for the crisper drawers. It typically sits above the crisper drawers, holding the glass shelf in place and separating the drawers from the rest of the refrigerator. 

Over time, the crisper cover frame can become damaged or wear out due to frequent use, overloading, or accidental impacts.  

Symptoms of a bad Crisper Cover Frame include:

• Visible cracks or breaks in the frame
• Difficulty fitting or securing the glass shelf properly
• The crisper drawers not sliding in and out smoothly due to misalignment or instability of the frame
• Sagging or warping of the frame, affecting its ability to support the shelf and drawers

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Color: White
Note: For RH Door. For BLACK gasket, order W11368721.

The Refrigerator Door Gasket is an OEM part for Whirlpool refrigerators. This part forms a seal around the refrigerator or freezer door, ensuring that cold air stays inside and warm air stays out. By maintaining a tight seal, the gasket plays a critical role in the appliance's energy efficiency, helping to keep food fresh and safe while minimizing energy consumption. 

Over time, door gaskets can lose their elasticity, get torn, or wear out, leading to gaps between the gasket and the refrigerator frame. 

Symptoms of a bad Refrigerator Door Gasket include:

• Visible cracks, tears, or wear in the gasket
• Condensation or frost buildup near the door edges
• The refrigerator or freezer door does not close as tightly as it should
• Increased energy consumption as the refrigerator works harder to maintain temperature

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Freezer Door Gasket is an OEM part for GE refrigerators. As the primary seal between the freezer door and the frame, it plays a critical role in maintaining proper insulation and temperature regulation within the freezer compartment. The gasket is designed with insulating materials to prevent the loss of cold air and absorption of warm air when closing the door. 

Causes of a bad gasket can include cracks, tears, or breaks that compromise the insulation over time due to regular use and door openings/closings. 

Symptoms of a bad gasket include: 

• Rising temperatures within the freezer, leading to melting or frost buildup 
• Accumulation of ice around the door seal
• Difficulty closing/sealing the freezer door tightly 
• Droplets or puddles of water forming around the base of the door

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The FreshFlow Refrigerator Air Filter is an OEM component for Whirlpool and Maytag refrigerators. Located inside the ventilation system, this filter purifies circulated air. This air filter is 3" wide by 2" high and white in color. It should be replaced every 6 months to ensure the best performance.

Causes of failure relate to clogging from trapped dust, dander and other allergens despite regular replacement intervals. Performance decreases as filter media becomes saturated over months of use.  

Symptoms of a dirty or blocked refrigerator air filter include:

• Reduced airflow causes higher compressor runtime hours  
• Odors being pulled into the fridge from unfiltered vents  
• Shortening of food storage life due to unpurified air exposure
• Reduced fan speeds or strange noises originating from the vents

This genuine Whirlpool filter is also compatible with Maytag, Jenn-Air, and Amana models as well.

The Air Filter is an OEM part for Frigidaire refrigerators designed to enhance the air quality inside the refrigerator, ensuring that food stays fresh and odor-free.

The Air Filter helps to remove unwanted odors and impurities from the refrigerator's circulating air. It absorbs and neutralizes common food odors, keeping your fridge smelling clean and pleasant. The activated carbon filter is 7 times more effective than baking soda at removing odors. 

For best results, change filter every 6 months. 
Color: Black. 
Measures about 7 inches wide by 5 inches deep. 

Symptoms of a bad air filter include:

• Lingering food odors inside the refrigerator
• Increased presence of stale or unpleasant smells
• Decreased effectiveness in eliminating odors

Replace your Air Filter with this genuine part to ensure a clean and fresh-smelling refrigerator. This OEM Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.

The Door Switch is an OEM part for Whirlpool refrigerators. This switch is crucial for controlling the interior lights and the activation of certain refrigerator functions when the door is opened or closed. 

Symptoms of a failing Door Switch include:

• Interior lights staying on when the refrigerator door is closed
• Interior lights not turning on when the door is opened
• The refrigerator unexpectedly starting or stopping
• Alarms or indicators malfunctioning, signaling an open door when it is closed

Causes of a bad door switch can involve mechanical failure due to wear and tear from frequent use, damage from impacts (such as slamming the door), or electrical issues like a short circuit or faulty wiring.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.