Burner & Related Parts

Replace missing, cracked, or worn black burner caps on your gas cooktop. This kit restores proper flame direction and appearance. Easy installation.

Replaces a cracked, corroded, or damaged burner base on your gas cooktop or range. Routes gas from the orifice to burner ports and supports the cap.

This burner lid is the top cover for a slim two-piece gas cooktop burner, protecting the burner head and helping direct flame. It restores proper burner appearance and helps maintain even ignition and heat distribution. What it does

• Covers the burner head to protect internal parts from spills and debris
• Helps direct gas flow for a consistent flame pattern during cooking
• Can reduce ignition issues caused by food or liquid obstruction on the burner head
• Restores the cooktop's finished look where the original lid is cracked, warped, or missing

• One burner lid (slim 2-piece style)

• Turn off the appliance and gas supply (or unplug) before servicing; allow all parts to cool completely
• Lift off the existing lid and position the replacement so it seats securely on the burner base
• Do not force or overtighten—ensure proper alignment to avoid damaging the burner head

Gas range burner cap sits on top of the burner head to direct gas flow and shape the flame. Replace if cracked, chipped, worn, or missing. Sold individually.

The Burner is an OEM part for Frigidaire gas ranges and cooktops. It is a stainless steel component that emits radiant heat from below the cooktop grates, facilitating safe, efficient cooking. 

Proper burner operation is essential for dependable cooking performance. The burner utilizes a gas control valve and orifice to deliver a precisely regulated flame that heats pots and pans quickly and evenly.

Causes of a bad burner can include cracks or holes developing from use over time, or damaged brass burners from spills or heat exposure.

Symptoms of a bad burner include: 

• Irregular or uneven cooking temperatures
• Burner flames that are too high or low  
• Yellow flame tips instead of blue
• Non-selective control or inability to adjust flames

Replacing the burner with a genuine Frigidaire part restores robust heat output. This ensures safe, efficient operation. It is also compatible with Gas ranges by Electrolux, Gibson, Kelvinator, and Kenmore.
 

Converts your natural gas range to liquid propane. Includes orifices and parts needed for proper fuel type changeover in propane-supplied homes.

Simmer ring for gas range burners. Installs around the burner to control flame focus for low-heat cooking. Replace if cracked, warped, or missing.

Holds the surface burner assembly in place and routes gas safely. Replace if cracked, warped, or damaged to restore proper burner positioning on your cooktop.

Converts your gas range from natural gas to liquid propane fuel. Includes all orifices and instructions. Needed when switching fuel types or missing parts.

Medium burner crown for gas cooktops and ranges. Sits atop the burner base to shape and distribute flame. Replace if cracked, chipped, or damaged.

Orifice spud secures the burner orifice to the gas valve/manifold and directs fuel to the burner for proper flame performance. Replaces a damaged or corroded spud to help restore correct gas flow at the burner. What it does:

• Holds the burner orifice in place and channels gas from the valve to the burner.
• Helps maintain consistent flame size for even heating and cooking.
• Commonly used when a burner has weak, uneven, or intermittent flame performance.
• Replace if the spud is cracked, corroded, damaged, or leaking.

• Turn off the appliance's gas supply and disconnect power before beginning any repairs.
• Remove burner components per the service manual and install the spud in the same orientation as the original.
• Hand-start threads, then snug with the appropriate wrench—do not overtighten.
• After installation, check fittings for leaks with an approved leak-detection method; if you smell gas or suspect a leak, stop.

Surface burner cap sits over the burner head to shape the flame. Replace if cracked, chipped, or worn to restore even heating and proper flame distribution.

Holds and positions the burner orifice above the surface burner on gas ranges. Replace if cracked, broken, or damaged to restore proper burner alignment.

Converts your gas range between natural gas and LP propane fuel sources. Includes orifices and components needed for safe fuel type conversion.

Controls gas flow to your range burner for proper flame size. Replace if orifice is worn, clogged, or damaged to restore accurate gas metering.

Surface burner head for gas ranges. Sits above the gas burner to distribute flame evenly. Replace if cracked, warped, or clogged from repeated use.