Carburetor

This genuine carburetor repair kit is designed for use in select trimmer engines. The carburetor is responsible for combining the gas and air mixture that will go into the engine. Fuel and air flow into the carburetor through filters to remove any potential debris or particulates. Then, they are passed through a series of tubes and diaphragms and mixed together in the inner tube before being released into the engine through a butterfly valve. Over time, the high heat and constant pressure can damage the gaskets, diaphragms, and other parts of the carburetor. It may be necessary to replace everything with this carburetor repair kit that includes multiple components. This genuine OEM carb kit is compatible with select lawn and garden trimmers from Craftsman, Poulan, Weed Eater, and Jonsered. There are more than 50 compatible models available that can use this kit. This carburetor repair kit comes with 16 pieces in total, including the gaskets and diaphragms, the primer bulb and primer bulb assembly, and other necessary hardware. It is sold as a single unit. Always cool the engine completely and work in a well-ventilated area when performing carb rebuilds and replacements or other engine repairs.

The genuine replacement primer bulb covers the primer base and plunger on specific leaf blower models. Before starting the leaf blower, the primer is pushed to allow fuel to flow into the carburetor to assist in a smooth engine start. It can also make starting the equipment easier after it has been sitting for a period of time. The bulb is made of plastic and exposed to the elements, so over time it can become cracked, worn, or even completely lost. Without it, the engine cannot be properly primed before operating and therefore will not run as well. Replacing the bulb with a genuine OEM model like this should be done as soon as possible. This OEM primer bulb is manufactured by Husqvarna and can be used for a variety of leaf blowers that are manufactured by the brand. This model is also compatible with Poulan, Craftsman, and Weed Eater products. The bulb is made of durable rubber and may require a screwdriver for replacement to assist in fitting the bulb into place. This unit is sold individually and does not include the primer base assembly or any hardware.

This kit includes all parts necessary to repair the carburetor on certain models of small engine outdoor power equipment.Internal combustion engines require a proper ratio of air to fuel in order to run. The carburetor is responsible for sending a combination of fuel and air to the motor for ignition. Because the carburetor is used every time the engine is started, it can deteriorate over time and may need to be repaired or replaced. Signs of a worn-out or deteriorating carburetor include backfiring, overheating, excessive black smoke, and reduced engine performance. This carburetor repair kit is a genuine OEM replacement part that has been sourced directly from the manufacturer. This carburetor repair kit can be used to fix various different models of Husqvarna, WeedEater, and Poulan blowers, trimmers, and hedge trimmers. Please note this part is sold individually.

This carburetor kit is a genuine Husqvarna part that can be used as a replacement part inside snowblowers, wood-chippers, lawn mowers, and other outdoor appliances. The function of the carburetor kit in a small engine is to mix the air and the fuel together at a proper ratio for combustion before they are both passed into the engine via the network of valves. This carburetor kit includes the carburetor and the primer bulb. If the carburetor kit is indeed malfunctioning or in a state of disrepair, there are signs to look for in confirming the issue. Pour a spoonful of fuel directly into the carburetor and try to start the engine with the recoil starter. If the engine fails after a quick false start, the carburetor kit might be in need of repair or total replacement. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This carburetor kit is compatible with the brands Husqvarna and Weed Eater.

This OEM carburetor is designed as a replacement for compatible leaf blowers. The carburetor takes in air and fuel and mixing them together before sending the mixture onto the engine to power the machine. The air comes in through an air filter to remove any impurities and then it passes into a smaller inner chamber, where fuel is injected through small holes in the chamber after also being filtered. Then, the two mix and are passed into the engine through an adjustable butterfly valve. If the engine isn't performing well or will start but won't stay running, the carburetor could be in need of replacement. It’s usually easier to replace the entire assembly than individual parts, and this genuine OEM part can provide the solution for machines it fits. This carburetor replacement is specifically designed to be compatible with select Craftsman, Poulan, and Husqvarna leaf blower engines. The carburetor does not include any gaskets or hardware required for replacement, so those will need to be purchased separately if they are required. Be sure that the engine is completely cool before beginning repairs and wear gloves for hand protection whenever performing engine work on any machines.

This part is a replacement choke lever. This is a genuine OEM part made by Husqvarna and has been sourced directly from the manufacturer. The intended use for this part is to properly replace a defective or broken choke lever in line trimmers.The choke lever enables the choke plate to open or close within the carburetor, which helps to power on the engine. The engine may not start if this part is faulty, so if damaged, it should be replaced. Always ensure that the equipment is completely powered off and is cooled down before attempting to start the repair process. For more accurate information on the installation of this particular choke lever, reference the owner's manual or equipment diagrams for specific instructions and part location. This is an authentic OEM part and as such is sold individually and made from durable and high-quality plastic. This choke lever can be used with a variety of line trimmer models manufactured by Husqvarna, Poulan, and other brands.

This is a replacement spring cap that will ensure the spring retains the correct position between the spring and the diaphragm. It is sometimes called a carburetor diaphragm spring cap. If there is an issue with the spring cap, it could cause issues with the placement of the spring, along with carburetor problems. The engine may not run properly, and it could be more difficult to start. Owners should check the spring cap if they notice issues with their engine, as well as during maintenance check-ups. In some cases, the spring cap could become corroded or broken, and getting a replacement becomes essential. The spring cap is a genuine OEM replacement part for small engines including lawn mowers, tillers, leaf blowers, generators, chippers, and log splitters. The cap is compatible with a range of brands including Craftsman, Toro, Briggs & Stratton, Cub Cadet, Lawn-Boy, and Simplicity.

This replacement part is a float bowl. This part is a small part of the carburetor and is able to hold a small amount of liquid gasoline. This serves as a reservoir for fuel.If the engine is unable to run due to lack of fuel, it might be because of a malfunctioning float bowl. Be sure to wear work gloves during this repair as working near the carburetor might be dangerous in certain situations. This is a genuine replacement part made by Midwest Engine. It is an OEM replacement part which will ensure a proper fit. This part is sold individually.

This replacement part is a carburetor overhaul kit. This kit includes multiple parts that are needed to rebuild or repair a damaged carburetor.Be sure to diagnose the issue before purchasing this kit to ensure that the needed parts are included. A damaged carburetor may cause hard starting or black smoke exhaust during use. Wear work gloves when working with the carburetor. The engine should be powered down and cooled off before starting this job.This is a genuine OEM replacement part manufactured by Midwest Engine. This part is sold individually.

This carburetor assembly is an original OEM part sourced directly from the manufacturer, MTD. It is sold individually. It is designed for use with pieces of outdoor lawn and garden power equipment that have small engines, such as a log splitter, a chipper, a shredder, and a snow blower. It is compatible with products by brands such as MTD.The carburetor assembly part mixes air and fuel for internal combustion engines in the proper air-to-fuel ratio for combustion. The replacement or repair process is necessary when the carburetor fails to perform as expected. A number of symptoms could indicate a faulty carburetor, ranging from poor engine performance to black smoke from the exhaust. Other indicators of a bad carburetor include backfiring, overheating, and hard-starting.When replacing the carburetor assembly, be sure to complete the work in a well-ventilated area. It is essential that anyone involved in the rebuild knows to drain any leftover fuel from the tank and fuel lines prior to beginning the rebuild process. It's also important that the repair person or repair team wears proper safety equipment throughout the installation process, such as work gloves to protect the hands.

This non-vented primer assembly is a replacement part that can work with a range of lawn and garden equipment. This assembly features the push-bulb that is used to create a vacuum that draws fuel into the carburetor, so it can help to start the engine. If the primer assembly is damaged, it will not create a vacuum to pull the fuel from the tank. This can result in equipment that does not start.The primer assembly is made from plastic and rubber. Although it is built to last, it can wear down. The bulb might crack, or it might not connect correctly, for example. If there are any issues with the primer assembly, the part should be replaced right away.The non-vented primer assembly will work with select models of trimmer and mower from Yard Machines, Husky, Troy-Bilt, and MTD. This assembly is sold individually. It is an authentic part that has been sourced from the OEM.

This carburetor assembly is a genuine MTD part. It is a replacement part for several models of lawn mowers and trimmers. The carburetor is the part of the engine that balances the amount of air and fuel in the engine. Even if the carburetor has malfunctioned, the mower or trimmer may still run but at reduced capacity, which may cause damage to the engine. This replacement can be done at home with pliers, a screwdriver, and basic safety equipment. Be sure the engine is completely cooled, disconnect the spark plug, and empty the fuel tank before beginning.This carburetor is a genuine OEM part sourced directly from the manufacturer. It is compatible with machines made by MTD and Troy-Bilt.

This replacement part is a carburetor assembly and is intended for use in different types of lawn equipment. This is a genuine replacement part made by MTD. This carburetor assembly is found in appliances that contain and engine. The carburetor is responsible for supplying the internal engine with the air and fuel mixture. This part is able to regulate the air flow in the specific compartments and allows the engine to run smoothly and effectively.A new carburetor assembly might be needed if the current carburetor is malfunctioning or not working at all. The user might be able to tell if the part needs replacing if there are noises coming from inside the engine. This might reveal that the carburetor is not connected correctly or is damaged. Be sure the device is completely shut down prior to starting a repair as the engine can be dangerous if it is powered on.This part is sold individually and is compatible with lawn equipment made by MTD. Note that this part is a genuine OEM replacement part.

This carburetor repair kit is a genuine OEM replacement part for a wide variety of tiller and chipper engines. The carburetor is one of the most essential parts of an engine. It is responsible for mixing a balance of oxygen and fuel for combustion. If the carburetor is damaged, the engine will not produce the right about of combustion and may not start. This kit is for service the carburetor if it becomes damaged. This kit contains a valve needle, jet nozzles, a float and float pin, o-rings and gaskets, and fuel drain plug—everything needed to fix a carburetor. To make repairs to the carburetor, you will need a set of screwdrivers and socket wrenches. The repair will depend largely on what appliance you are fixing, so be sure to follow the instructions in the user's manual. Before making any repair, be sure to allow the engine to cool completely and drain it of excess fuel. This part is designed for tiller and chipper engines made by Cub Cadet, MTD, Troy-Bilt, and Yard Machines. This part is sourced direct from its original manufacturer and ships individually.

This is a genuine replacement carburetor rebuild kit designed for use with select snowblower engines. The carburetor is responsible for mixing the air and fuel that flows into the engine to initiate combustion and start the engine. It has many moving parts and gaskets, and is exposed to high heat and vibrations during use, which can lead to damage and wear over time. A damaged carburetor can cause the engine to die or fail to start. If the carburetor fails, it is often cheaper to rebuild it than to replace the unit or the entire machine. When replacing the components of the carburetor, each part should be done one at a time and the areas around the parts should be cleaned before installing new pieces. Be sure to work in a well ventilated area and allow the engine to cool completely before performing any repairs.This OEM carburetor rebuild kit is manufactured by MTD and designed for use in certain snowblowers from the brand. The kit is also compatible with select engines from Yard Machines, Yard Man, and Troy-Bilt. It includes all of the gaskets, pins, and other components that are needed to do a major carburetor overhaul. It is sold as an individual set.