Cooktop Burner & Related Parts

What you will need: * replacement parts * small and regular Phillips screwdrivers * small wrench * soapy water in a spray bottle or leak detection spray Take apart the top of the stove control unit 1) turn off the gas to the stove, in my case I cannot get to the shutoff valve easily so I ended up turning off the electricity to the stove at the fuse box as that forces an emergency shutdown of the gas supply internally of the stove. 2) remove all 5 knobs, the grates at the top and open the oven... Read more

In an attempt to clean the range from the grease-gunk build-up, I had to remove the burner heads. Unfortunately, the 2 most used burner heads had immovable screws that locked them into the orifices underneath. After numerous hours in attempts to salvage the old burner heads and orifices attempting to remove the immovable screws, I gave up. Checked Maytag's website for parts and found nothing. Turned to AppliancePartsPros.com and found the correct parts for reasonable price in a matter of... Read more

Found web site. Called the 800 number. Placed the order. 2 days later, they were at my door. Read more

I examined the inner burner heads and determined that two of the most frequently used burners were warped and were not making good contact with the burner base. It's a GE Profile series stove about 10 -12 years old. I checked the GE Parts website, and they wanted almost $100 for the large burner head but didn't even have the small one at all, saying it was no longer available. By Googling the parts numbers, I found Appliance Part Pros, and they had both burner heads available. They were still a... Read more

Ordered new/replacements, excellent chat on line, Quick turn around delivery. Thank you Will recommend to friends. Read more

• Gas igniter glows, but will not light

Went to AppliancePartsPros.com as I have used them in the past for other parts. Parts were easy to identify and find on their website. Very reasonably priced. They shipped out right away and I received them and installed them in time to accommodate out of town guests on the weekend. I have a happy wife. This is a good thing. Read more

I bought new parts, but in black, so that any future staining over time would not be as noticeable. I was able to find everything I needed through AppliancePartsPros.com, and even though I only paid for economy delivery (3-6 working days), I was amazed that they turned up within 24 hours of my order being submitted! Replacing the parts was a 3 minute job, & my 14 year-old Kenmore cooker looks brand new. Read more

Conversion kit said put propane orifice .109 in to correct the problem but I had to use the .102 orifice. Read more

Ordered replacements Read more

I bought a new orifice and installed it. Read more

After turning off the gas and unplugging the electricity, I removed all the burners from the stove top using a 3/16" hex socket. Then used a 1/4" socket to removed two or three screws under each burner which hold the burner base to the bottom of the top panel. Then pulled all the knobs and removed the front panel which was held in by two Phillips screws accessible from underneath the panel. It helps to open the oven door to get at these screws. With the knob panel gone, I removed two screws... Read more

Found that the gas line did not have a dirt trap put in it. So I put one in. I think the regulator valve was not closing off. To be safe, I replaced the gas safety valve and regulator. Read more