Frigidaire Parts

Keep your appliance protected and performing as designed. This replacement filter sits in the unit's filtration path to capture debris and contaminants, helping guard internal components and support consistent operation. What it does:

• Captures particles per your model's design to reduce internal buildup
• Helps maintain proper performance and circulation within the system
• Common failure signs include reduced performance, unusual odors, or visible residue
• Replace if torn, warped, saturated, or excessively dirty

• 1 filter

• Disconnect power before servicing; allow any hot surfaces to cool
• Open the access panel or grille and note the filter's orientation
• Fully seat the new filter and engage any tabs/clips as designed
• Follow your owner's manual for cleaning/replacement intervals; do not operate without a required filter

This is not a filter. Use this bypasss if don't want to use the PureSource 2 Water Filter WF2CB or the Pure Advantage Water Filter EWF2CBPA.

This air filter features a durable plastic frame and screens airborne particles from intake air to help protect internal components. Replacing a cracked or heavily clogged filter helps maintain proper airflow and keep the appliance running efficiently. What it does

• Captures dust and lint from incoming air to reduce buildup inside the unit
• Helps maintain airflow and overall system efficiency
• Replaces a missing, damaged, or saturated filter
• Common symptoms: weak airflow, longer run times, visible dirt buildup or damage to the filter

• 1 air filter with plastic frame

• Disconnect power to the appliance before servicing
• Open the front grille or filter access panel per your owner's manual
• Slide out the old filter and insert the new filter in the same orientation
• Ensure the filter is fully seated; do not operate the unit without a filter

This water filter housing secures and seals the refrigerator's filter cartridge, routing water to the dispenser and ice maker. Replace it if the filter area leaks, the filter won't seat, or water/ice flow is reduced. What it does:

• Holds and seals the filter cartridge to the water system
• Directs water through the filter to the dispenser and ice maker
• Helps maintain proper pressure and a leak-resistant connection at the filter head
• Typical symptoms: leaking at the filter area, slow/no water from the dispenser, no ice production, filter won't lock in place

• 1 water filter housing assembly

• Disconnect power and shut off the water supply before servicing
• Dispense water to relieve line pressure; place a towel to catch residual water
• Note tube routing; use the quick-connect collets to release/insert water lines fully
• Restore water and power, check all connections for leaks, and flush the dispenser to clear air

This replacement filter helps capture airborne particles during normal operation, protecting internal components and supporting proper airflow and performance. Replace a damaged or clogged filter to keep your appliance working efficiently and safely.

• Traps dust, grease, and debris from the airstream to protect the blower and internal parts
• Helps maintain proper airflow for effective ventilation and performance
• Replace if the filter is torn, saturated, misshapen, or heavily clogged
• Common symptoms of a worn filter include reduced airflow, lingering odors, and increased fan noise

• Disconnect power to the appliance before servicing
• Allow hot surfaces to cool; wear cut-resistant gloves—edges can be sharp
• Note the orientation of the old filter and seat the new one the same way
• Restore power and verify airflow after installation

This replacement filter restores clear airflow through your appliance's venting system. It captures airborne particles so the fan can exhaust efficiently and helps protect internal components from buildup.

• Traps grease and other particulates in the air stream
• A clogged or damaged filter can reduce airflow and strain the blower
• Replace when torn, warped, or heavily saturated
• Common symptoms: weak venting performance, lingering steam/odors, visible residue on or around the filter

• Disconnect power to the appliance before servicing
• Access the filter from the intake grille or bottom panel and release the retaining tabs/screws
• Install the new filter in the same orientation; ensure it seats fully and locks in place
• Restore power and test fan operation on each speed

The Drain Filter is an OEM component specifically designed for Frigidaire dishwashers. It is designed to trap food particles and debris from exiting the dishwasher and entering plumbing drains.

Causes of failure usually stem from normal wear and potential mineral deposits reducing pore size over many years of use. Hard water areas present additional stress. 

Symptoms of a clogged or ineffective drain filter include:  

• Slow or incomplete draining after cycles
• Gurgling noises from drain line blockages
• Potential plumbing backups and repairs from unfiltered waste

This OEM part fits Electrolux, Gibson and Kenmore models as well.

This Filter is an OEM part for Frigidaire range hoods. It plays a vital role in maintaining the efficiency and cleanliness of your range hood by trapping grease, smoke, and other airborne particles during cooking. 

The effectiveness of a range hood filter can diminish over time due to the accumulation of grease and debris, which can impede airflow and reduce the hood's ability to extract unwanted cooking fumes.

Symptoms of a dirty or failing filter include:

• Reduced suction and efficiency in smoke and odor removal.
• Grease buildup on the filter is visible upon inspection.
• The range hood becoming noisier, indicating strain on the motor.
• Persistent odors in the kitchen, not effectively cleared by the hood.
• Poor overall air quality in the cooking area.

This Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator, and some Kenmore models.
 

This replacement trap is a drain-path component that helps create a water seal and route water out of the unit, reducing backflow and odors. Replace a cracked, clogged, or deformed trap to restore proper drainage and leak protection.

• Forms a water seal in the drain path to help prevent air backflow and odors
• Directs water safely away from the appliance to the designated drain
• Can help alleviate leaks, standing water, or gurgling due to a damaged trap
• Typical symptoms: slow or no draining, water leaks at the drain outlet, musty odors

• Disconnect power; shut off water supply if applicable
• Place a towel or pan to catch residual water during removal
• Transfer any O-rings, seals, or fittings from the old part
• Ensure correct orientation and fully seat/secure connections; test operation and check for leaks

This replacement filter captures everyday particles so your appliance can vent and circulate properly. Replacing a torn, saturated, or clogged filter helps restore airflow, reduce buildup, and keep internal components cleaner for reliable performance. What it does:

• Traps debris from the airstream to help prevent buildup inside the unit
• Helps maintain proper airflow and ventilation performance
• Replace when saturated, damaged, or per your model's maintenance schedule
• Common symptoms: weak venting/airflow, lingering odors, residue near vents, or a visibly dirty/damaged filter

• 1 filter

• Disconnect power before servicing
• Open the grille or access panel; note the filter's orientation before removal
• Seat the new filter fully; do not operate the appliance without a filter installed
• Edges may be sharp—wear cut-resistant gloves

This refrigerator water filter removes common impurities from the ice and water supply so you get cleaner-tasting water and clearer ice. Designed to fit inline/replaceable filter housings used in many Frigidaire refrigerators. What it does:

• Reduces chlorine taste and odor for improved drinking water flavor
• Helps reduce sediment and particulates that can affect ice clarity
• Keeps water flowing properly when replaced as part of routine maintenance
• Addresses symptoms like cloudy ice, bad-tasting water, or reduced water quality

• One replacement refrigerator water filter cartridge

• Replace filter according to your refrigerator manufacturer's instructions; typically twist or push in to seat and lock
• Run several gallons of water through the dispenser after installation to flush the system and remove loose carbon fines
• If water flow is restricted after installation, check filter orientation and seating; do not force
• For safety, disconnect power to the appliance before accessing internal filter housings

Filter only. Fine filter not included.

This replacement air filter screens dust and lint before they reach the evaporator coil and blower, helping maintain proper airflow, cooling performance, and a cleaner system.

• Traps airborne dust/lint to protect the coil and fan
• Helps maintain airflow and cooling efficiency
• Supports cleaner indoor air and reduces coil fouling
• A clogged or damaged filter can contribute to weak airflow, reduced cooling, icing, or musty odors

• Disconnect power before opening the front grille or servicing the unit
• Open the grille, slide the old filter out, and fully seat the new filter in the track with the correct orientation
• Do not operate the appliance without a filter in place
• While accessible, check and gently clean the return area per manufacturer guidance

This housing assembly is the outer cabinet component that supports and protects internal appliance parts, restoring structural fit and appearance. Use it to replace cracked or damaged housings that expose internal components or cause misalignment. What it does:

• Replaces the appliance's outer housing to restore proper fit and protection
• Protects internal wiring, controls, and mechanical parts from damage and debris
• Helps correct alignment issues caused by a warped or broken cabinet
• Reduces rattles and vibration when the original housing is damaged

• 1 housing assembly

• Designed to mount to the appliance frame; some trim or panels may need temporary removal
• Inspect surrounding seals, fasteners, and clips; replace any damaged hardware
• Use appropriate hand tools and disconnect power before beginning work

The Filter is an OEM replacement part for Frigidaire range hoods. It is designed to capture grease, smoke, and airborne particles generated during cooking, helping to maintain clean air in your kitchen and protect the internal components of your range hood. The filter plays a critical role in ensuring the efficiency and longevity of the appliance.

Causes of a bad filter can include prolonged use without cleaning, saturation with grease and dirt, or physical damage such as tears or warping. Over time, a clogged or damaged filter will lose its effectiveness, leading to diminished performance of the range hood.

Symptoms of a bad filter include:

• Reduced airflow or poor suction
• Lingering cooking odors in the kitchen
• Excessive grease accumulation on nearby surfaces
• Visible damage or deformation in the filter

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

Replacement grill trim that restores your appliance's exterior finish and helps direct airflow. Use this grill when the original piece is cracked, missing, loose, or cosmetically damaged to regain a clean, finished appearance. What it does:

• Covers and protects internal components behind the appliance front or vent area.
• Helps direct airflow and reduce drafts around the appliance opening.
• Prevents debris or fingers from contacting internal parts.
• Stops rattling or vibration caused by a bent or loose grill.
• Restores the appliance's original look when the factory grill is damaged.

• Disconnect power at the breaker and allow the appliance to cool before starting any work.
• Remove existing fasteners or clips; retain original screws if they are reusable.
• Align the new grill, then secure with the original hardware; avoid over-tightening to prevent cracking.