General Electric Drawer, Shelf, Pan

This is the front trim/retainer for a full-width refrigerator shelf. Replacing a cracked or missing bar restores a secure front edge so items stay in place and the shelf installs and functions correctly.

• Attaches to the front of a full-width shelf to act as the retaining/trim piece
• Helps keep items from sliding off the shelf during normal use
• Supports proper fit and stability of the shelf assembly
• Typical failure signs: cracked, broken, or loose/missing front bar

• Disconnect power to the refrigerator and remove the shelf before servicing.
• Release the damaged front from its side supports; note orientation.
• Align and slide/snap the new front into the supports until fully seated, then reinstall the shelf.

Color: white. Measures about 15 inches wide by 4-1/2 inches high by 7-1/2 inches deep.

This is the glass insert for the refrigerator pan cover, creating the flat shelf above the drawers. Replacing cracked or missing glass restores a stable, easy-to-clean surface and helps contain spills from reaching the storage areas below.

• Forms the flat shelf that tops the pan cover assembly over crisper/deli drawers
• Provides a sturdy surface for storing food items
• Helps contain small spills so they don't drip into drawers below
• Replace if the glass is cracked, shattered, chipped, bowed, or missing

• Disconnect power and remove food from the affected shelf area
• Lift out the pan cover frame and slide out the old glass
• Clean the frame's channels; seat the new glass fully and evenly
• Handle glass carefully and wear cut-resistant gloves

This is the front door shelf for the freezer compartment. It provides a sturdy ledge to hold smaller frozen items on the freezer door and helps keep contents organized and in place.

• Holds and supports items stored on the freezer door
• Replaces a cracked, warped, or missing shelf
• Common symptoms: items falling off the door, reduced storage capacity, broken or loose shelf
• Restores proper organization and containment on the freezer door

• Unplug the appliance before servicing
• Remove any items from the affected shelf area
• Lift out the old shelf/guard and align the new shelf with the door slots
• Press or snap firmly into place; verify a secure fit before reloading items

This freezer shelf module replaces a broken or missing shelf to restore stable, level storage in the freezer. It installs in the factory side supports to help keep frozen foods organized and easy to access. What it does:

• Provides a sturdy, level surface for storing items in the freezer
• Replaces shelves that are cracked, warped, broken, or missing
• Helps prevent items from tipping or falling between levels
• Restores intended spacing and organization inside the freezer

• Disconnect power before starting
• Clear the area; let the cavity warm slightly to reduce plastic brittleness, and wear gloves—handle any glass with care
• Remove the old shelf. Align the new shelf with the side support slots/tabs and seat it fully so it sits level
• Do not force into place; ensure it's fully engaged in the supports

This part is a genuine OEM replacement crisper drawer intended for use with refrigerators. This crisper drawer is intended to properly store fruits, vegetables, and produce at the correct temperature and humidity in order to keep it fresh for as long as possible. Crisper drawers can become cracked or broken over time or if subject to damage, requiring replacement. No tools are needed to replace this part and installation is straightforward. Simply remove the old crisper drawer carefully and slide the replacement part into place. This part has been made by General Electric and has been sourced directly from the manufacturer. It is made out of high-quality, durable, non-corrosive plastic to ensure high quality and durability. This crisper drawer is sold individually. It is intended for use with various different refrigerator models manufactured by General Electric, Hotpoint, RCA, and some other compatible brands.

This replacement vegetable pan cover assembly forms the shelf above your refrigerator's crisper drawers and helps the drawers operate correctly while supporting produce humidity. Replace a cracked or warped cover to restore stability and smooth drawer function. What it does:

• Creates the shelf surface over the crisper/vegetable bins
• Helps maintain humidity in the crisper area for fresher produce
• Provides support and tracks for crisper drawers to slide properly
• Replaces damaged or missing covers causing sagging shelves, sticking drawers, or poor crisper performance

• 1 vegetable pan cover assembly

• Unplug the refrigerator and clear the affected shelf area
• Remove crisper drawers; lift out the old cover carefully
• Seat the new cover on the support ledges and ensure it sits flat; reinstall drawers
• Handle components carefully to avoid damage, especially any glass

This freezer shelf restores lost storage and organization inside your freezer. Replace a broken or missing shelf to add a stable level for stacking and separating items so food stays accessible and easy to arrange.

• Provides an additional storage level inside the freezer
• Helps organize and separate frozen foods for quicker access
• Replaces a cracked, bowed, or missing shelf
• Seats into the freezer's existing side supports for a secure fit

• Remove food from the area before replacing the shelf
• Handle carefully; edges and corners can be sharp
• Align with the side supports and ensure the shelf is fully seated on both sides
• Distribute weight evenly; avoid overloading the shelf

This shelf module assembly restores a sturdy, level storage surface inside your refrigerator. Replace a damaged or missing shelf to recover usable space and keep items organized and easy to access. What it does

• Provides a flat, stable surface to support food containers in the refrigerator compartment
• Restores storage capacity when the original shelf is broken, warped, or missing
• Helps keep contents organized and accessible
• Addresses issues like sagging, instability, or a shelf that won't stay seated in its rails

• One shelf module assembly

• Disconnect power to the refrigerator before servicing
• Remove items from the area and slide/lift out the old shelf
• Transfer any reusable trims or components from the old shelf
• Fully seat the new shelf in the side rails; ensure it's level and secure before reloading

This bin door assembly is the flip-up cover for a small door bin compartment on your refrigerator. Replacing a cracked or missing cover keeps items contained and restores convenient access and a clean, finished look. What it does:

• Covers the door bin compartment and flips up for easy access
• Helps keep items from falling out when the door opens and closes
• Restores proper function when the original cover is cracked, warped, or missing
• Typical symptoms include broken hinge tabs, a cover that won't stay closed, or a loose/misaligned lid

• Includes 1 bin door assembly

• Remove items from the affected bin
• Release the old cover from the hinge tabs or pins and lift it off
• Align the new cover's tabs with the bin hinges and press/snap into place
• Do not force parts; verify smooth open/close after installation

This fresh food shelf module replaces the fixed shelf assembly inside your refrigerator's main compartment. It restores a sturdy, level storage surface and proper fit when the original shelf is cracked, warped, or no longer seats securely.

• Provides a rigid, level platform for food storage in the fresh food section
• Restores intended spacing and organization between shelves and bins
• Seats securely on side supports to prevent tipping or falling
• Common symptoms: cracked frame, broken mounting tabs, shelf won't sit level, shelf falls or is missing

• Remove all items from the shelf and lift out the damaged shelf
• Align the new shelf with the side rails/slots and set or snap it into place
• Handle edges carefully to avoid damage or injury during installation

This replacement gallon door bin restores sturdy, convenient storage on the fresh food door of your refrigerator. Use it to keep large containers and everyday items organized and easy to reach. What it does:

• Mounts on the fresh food door to hold bottles, jars, and many gallon-size containers
• Replaces cracked, warped, or missing door shelf bins to restore capacity
• Helps keep items upright and accessible, reducing clutter on interior shelves
• Common symptoms: broken or loose bin, worn tabs, bin won't stay seated, items tipping or falling

• 1 door bin assembly

• Open the door fully; lift the old bin straight up and out of the liner slots
• Align the new bin with the slots and press down until fully seated
• Distribute weight evenly and avoid overloading, especially with gallon containers
• Wear gloves and handle plastic carefully to prevent damage

This half-width crisper drawer is used with the Hammer Head shelf design. It replaces a cracked or missing bin so you can organize produce and other fresh items and slide the drawer smoothly on the shelf rails.

• Holds produce and other items in the fresh-food compartment
• Slides on the side rails under the Hammer Head shelf to restore proper drawer operation
• Common symptoms: cracked or broken bin, won't slide/seat correctly, falls off rails, missing drawer
• Helps contain spills and keep items organized

• Empty the old drawer and pull it straight out; lift slightly to clear the stops
• Align the new pan with the rails and slide it in until fully seated—do not force
• Verify the shelf and rails are correctly positioned and level
• If removing shelves or working near lights or wiring, disconnect power for safety

This shelf slideout assembly replaces the sliding rail that lets a refrigerator shelf glide in and out, restoring smooth, stable movement and easier access to stored items. Fits factory shelf mounting locations and installs without altering the cabinet. What it does:

• Provides the sliding support for a refrigerator shelf so it extends and retracts smoothly
• Replaces worn, cracked, or misaligned slide rails that cause sticking or uneven movement
• Stops shelves from catching, binding, or falling when pulled out
• Helps restore proper shelf alignment and load support

• Disconnect power to the appliance and remove food and the shelf before starting
• Installation typically requires removing the old slide, aligning the new rail in the shelf track, and securing with existing screws or clips
• Use basic hand tools; avoid forcing broken plastic tabs—inspect and replace damaged retainers if present

A replacement module shelf assembly that supports and secures a refrigerator's electronic control module and wiring inside the cabinet, helping maintain proper component position and reduce vibration-related connection issues. What it does:

• Provides a stable mounting surface for the main control module and related wiring harness
• Keeps the module correctly positioned to prevent loose connections or intermittent electrical symptoms
• Helps reduce vibration and rattling that can occur when the original shelf is cracked or broken
• Maintains proper spacing to avoid contact with other components that might cause wear or shorting

• One module shelf assembly

• Disconnect power to the appliance before beginning any service
• Handle the shelf and electrical connectors gently to avoid damaging clips or wiring
• Installation typically requires basic hand tools and removing interior panels for access
• Module and harness are fully seated and secured before restoring power

This outer drawer slide supports and guides a refrigerator drawer or pantry pan so it opens and closes smoothly. Replacing a worn or cracked slide restores alignment and helps prevent sticking, tipping, or spills.

• Attaches as the outer rail for the sliding drawer assembly
• Provides smooth gliding action and supports the drawer/pan
• Helps keep the drawer level and properly aligned
• Common symptoms: drawer hard to move, tilts or falls, cracked/broken rail, scraping or binding

• Disconnect power; empty and remove the affected drawer
• Remove the shelf/cover if needed to access the slide
• Take out mounting screws/clips; note the slide's orientation
• Install the new slide, ensure rails are parallel, and test drawer travel