Range / Cooktop / Oven Switch
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9758060
Burner stuck on high heat or only working at maximum setting? This infinite control switch regulates burner temperature. DIY-friendly, 10-15 minute repair.
Do-It-Yourself Stories from Customers like You
One cooking element would only go on high Aaron H. • Sumas , WA • February 13, 2017
Replaced the switch in the back panel, SUPER easy!!
Read more
More
$64.22
- Compare At:
-
$75.78
- You Save:
-
$11.56
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10312185
Burner stuck on high heat or won't regulate temperature? This infinite switch restores precise control. Straightforward DIY repair with a screwdriver.
Do-It-Yourself Stories from Customers like You
Burner stuck on high setting too hot. Steven R. • Merrick , NY • November 28, 2022
Replaced the Infinite Switch. Simple fix using only a screwdriver.
Read more
More
$85.33
- Compare At:
-
$102.40
- You Save:
-
$17.07
Genuine Ge part
By: Ge
Part Number: WB18X23942
If your gas cooktop burners won't ignite or igniters click continuously, the switch harness may be faulty. Moderate DIY repair with basic tools.
Do-It-Yourself Stories from Customers like You
No spark or red led gas cooktop working with a lighter. Devang R. • San Ramon , CA • June 23, 2022
The ordeal began after wiping around burner knobs with a moist paper towel with cleaner and wrapping the towel around the burner knob shaft to clean around it. The cooktop stopped sparking on all the 5 burners and no red LED light. There was gas flow and I could light the burner using a lighter. I looked up and found a couple of good youtube videos on troubleshooting and also came upon the AppliancePartsPros.com site. I opened the cooktop (youtube video helped) after turning off the gas supply...
Read more
More
$46.33
- Compare At:
-
$55.60
- You Save:
-
$9.27
Genuine Bosch part
By: Bosch
Part Number: 00189968
The Vent Switch is an OEM replacement part for Bosch range hoods. It is an electronic control device located inside the range hood that regulates the internal vent and fan functions.
Causes of a faulty vent switch can include long-term use in high-heat cooking environments, damage from accidental spills or impacts, or normal component degradation over time.
Symptoms include:
- Failure of the fan or vents to engage during cooking
- Variable or inconsistent fan speeds that don't adequately vent smoke
- Electrical shorting or sparking noises from within the hood control unit
This genuine Bosch replacement part is also compatible with Thermador, Gaggenau, and some Kenmore range hood models.
Do-It-Yourself Stories from Customers like You
Thermador cvs36r cook'n'vent vent won't go down Martha M. • Los Altos , CA • January 17, 2015
I replaced the switch
Read more
More
$125.69
- Compare At:
-
$148.31
- You Save:
-
$22.62
Genuine Frigidaire part
By: Frigidaire
Part Number: 318293825
If your burner won't turn off or stays on high heat, this surface burner switch restores proper temperature control. Straightforward 30-minute repair.
Do-It-Yourself Stories from Customers like You
My ceramic surface cooktop had a large burner that would stick in the full on setting regardless of the control position Hugh H. • Duluth , GA • August 01, 2016
I replaced the Switch for the burner. Works fine.
Read more
More
$72.38
- Compare At:
-
$86.86
- You Save:
-
$14.48
Genuine Ge part
By: Ge
Part Number: WB24T10071
The Switch Gas Valve is an OEM part for GE ranges. It is responsible for controlling the flow of gas to the burners, allowing them to ignite and maintain a steady flame for cooking.
Causes of a bad switch gas valve can include wear and tear over time, buildup of debris or grease, or damage from repeated use or accidental impact. These issues can hinder the valve's ability to regulate gas flow effectively.
Symptoms of a bad switch gas valve include:
- Burners not igniting
- Irregular or weak flame
- Gas odor near the stove
- Inconsistent burner performance
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
Do-It-Yourself Stories from Customers like You
One of my gas range's was not igniting Mark M. • Centennial , CO • June 23, 2014
Bought this switch gas valve for the non-functional burner, and it cleared right up.
Read more
More
$44.95
- Compare At:
-
$53.49
- You Save:
-
$8.54
Genuine Whirlpool part
By: Whirlpool
Part Number: WP9761048
If your dual burner is stuck on high or won't adjust temperature, this infinite switch is likely the cause. Easy DIY repair takes under an hour.
Do-It-Yourself Stories from Customers like You
Burner was stuck on high William M. • Mountaintop , PA • June 23, 2014
Replaced dual element switch.
Fixed the problem.
All is good
Read more
More
$117.77
- Compare At:
-
$140.15
- You Save:
-
$22.38
Genuine Whirlpool part
By: Whirlpool
Part Number: WP8283288
Comes with jumper wire.
Do-It-Yourself Stories from Customers like You
Drier would not start when i set it to diagnostics code said 6e all display lights turned on Randal B. • Salt Lake City , UT • December 21, 2014
Searched internet for answers. Decided to replace the door switch. Drier now runs great!
Read more
More
$81.95
- Compare At:
-
$97.52
- You Save:
-
$15.57
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10391743
Fix burners stuck on high heat or won't adjust temperature with this infinite switch. Common issue with multi-ring burners. Easy DIY repair in under 30 minutes.
Do-It-Yourself Stories from Customers like You
Front two burners were heating out of control Garrey P. • Rogers , TX • December 11, 2018
Replaced two switches that controlled two front burners. One controlled three different burner sizes options in one burner. The other was the speed burner, basically three different burner options in one burner.
Read more
More
$87.24
- Compare At:
-
$102.94
- You Save:
-
$15.70
Genuine Ge part
By: Ge
Part Number: WB24X29364
Burner stuck on high or can't regulate heat? This infinite switch controls cooktop element temperature. DIY-friendly repair in under an hour.
Do-It-Yourself Stories from Customers like You
Element temperature would only work on high and there was no adjustment to the heat Joann S. • Lennox , SD • October 26, 2015
Ordered the element control for my dual front right burner and a infinite heat switch for my left front large single burner. Removed cooktop and followed the instructions video given with the parts online. Process was simple and everything on my cooktop is working like it is brand new. The only problem I have is with the online chat, save time by calling in and talking to someone as the people I talked to online (4 of them) are in such a hurry to get to the next call they gave conflicting part...
Read more
More
$72.38
- Compare At:
-
$86.86
- You Save:
-
$14.48
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10167742
If your range burner stays on high and won't adjust temperature, the infinite switch likely failed. This control switch regulates element power levels.
Do-It-Yourself Stories from Customers like You
Burners were working correctly most of the time but would stay in the on position (high )periodically and would not shut off automatically for the temperature you set the burner for Daryl B. • Gloucester , VA • August 12, 2021
Replaced the burner Infinite switches for the burners having the issue. Here are the latest part numbers for this model Maytag. Left rear (LR) and right rear (RR) burners are both 6" and use the same switch. Part # WP3149404. Left front (LF) is an 11 1/2" burner Part# W10167742. The right front (RF) burner is a double burner 6" center and 9 1/2" outside burner Part #WPW10149355. Very simple repair. Unplug the stove, remove the rear panel, remove the switch knob, remove the 2 switch screws,...
Read more
More
$73.61
- Compare At:
-
$87.60
- You Save:
-
$13.99
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10185286
Burner stuck on high or won't heat? This infinite switch controls electric cooktop burner temperature. Moderate DIY repair restores heat control.
Do-It-Yourself Stories from Customers like You
Right front burner was out Jimmie L. • Pelion , SC • August 29, 2016
So I ordered the burner and Ithe switch because I wasn't sure what part was defective. I pulled the oven out and I removed the 6 1/4 inch screws on each side of the glass top as well as the 2 Phillips head screws on the back, removing the 2 1/4 screws on the shield on the back gIves you easier access to them, then lifted the glass top up on the front to access the switch and burners. Make sure you turn the power off before beginning this process. When lifted up the wires connected to the...
Read more
More
$147.64
- Compare At:
-
$175.69
- You Save:
-
$28.05
Genuine Frigidaire part
By: Frigidaire
Part Number: 5304527842
The Switch Rocker is an OEM part for Frigidaire ranges. This switch is used to control various functions of the range, such as turning on heating elements or activating specific cooking modes. It provides a reliable and straightforward interface for managing the range's features.
You should replace the range switch rocker if it becomes faulty. Causes of a bad switch rocker can include wear and tear from frequent use, exposure to high temperatures, electrical malfunctions, or physical damage from impacts or mishandling. A defective switch rocker can result in unresponsive controls, making it challenging to operate the range effectively.
Symptoms of a bad Range Switch Rocker include:
- The switch not responding when pressed
- Inconsistent or flickering performance of the heating elements
- Physical damage or looseness in the switch
- Intermittent operation or complete failure to activate the desired function
This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.
Do-It-Yourself Stories from Customers like You
The rocker switch for to adjust the size of the heating element for the stove broke as well as the rocker switch to adjust the oven light broke Benjamin G. • West Sacramento , CA • January 07, 2017
I purchased 2 new light rocker switches, Because the heating element rocker switch was unavailable. First I removed the power source for safety. Then I simply pulled each switch out individually with a flathead screwdriver for leverage. I simply unplugged the wires from the old rocker switch, discarded the old rocker, plugged the wires into the new rocker switch, and pushed the new switch appropriately back into the control panel. I used the same steps for both rocker switches. Once...
Read more
More
$15.50
- Compare At:
-
$18.60
- You Save:
-
$3.10
Genuine Whirlpool part
By: Whirlpool
Part Number: 4392027
Microwave won't start or runs only when door is pulled? Replace faulty door interlock switches. This 2-pack covers top and bottom switches. DIY repair.
Do-It-Yourself Stories from Customers like You
Kitchen aid architect ii microwave turntable stopped rotating Stephanie M. • Colorado Springs , CO • March 25, 2017
First, it was going to cost $95 for an appliance guy just to look at it! I figured there would be an upcharge on the parts + labor on top of the $95, so I took a chance & decided my husband & I could fix it cheaper; we were right, but it was a 3 week process (luckily, we have another microwave in the basement we were able to use in the meantime). I googled the microwave model #, then price checked the same item I thought we needed; printed off the diagrams of the various microwave "systems" &...
Read more
More
$87.64
- Compare At:
-
$103.42
- You Save:
-
$15.78
Genuine Bosch part
By: Bosch
Part Number: 00189008
Burner won't spark or ignite? This spark switch signals the ignition module to light gas burners. Common DIY repair with basic tools, 15-30 minutes.
Do-It-Yourself Stories from Customers like You
Ignition spark would not work n one burner Shenton O. • Seattle , WA • September 28, 2017
Took out igniter module and porcelain was cracked. Replaced with ordered part and it worker fine!
Read more
More
$33.95
- Compare At:
-
$40.74
- You Save:
-
$6.79
Genuine Whirlpool part
By: Whirlpool
Part Number: W10917724
Burner stuck on high or won't adjust temperature? This infinite switch controls heat levels for surface elements. Common DIY fix, 15-30 minutes.
More
$75.95
- Compare At:
-
$90.38
- You Save:
-
$14.43