Tub Or Basket

This 27" basket assembly replaces a damaged or worn dishwasher rack so you can securely load dishes and slide the rack smoothly. It restores stable support for plates, bowls and glassware and improves rack alignment. What it does:

• Provides the main lower/upper dish support surface so items sit securely during wash cycles
• Restores smooth in-and-out rack travel when original basket is bent or worn
• Prevents dishes from shifting or contacting each other due to damaged tines or walls
• Helps reduce clattering, scraping or poor wash coverage caused by a misshapen rack

• One 27" basket assembly as shown

• Disconnect power to the appliance and shut off the water supply before beginning any work
• Remove remaining dishes and carefully lift out the old basket; handle edges and glassware with care
• Align the basket on the rack rails and slide into position; verify rollers/wheels engage the track
• If the basket is large or awkward, have a second person assist to avoid dropping or damaging the part

This balance ring assembly helps stabilize the washer tub during spin cycles to reduce vibration and noisy operation. Replaces a worn or damaged counterweight to restore smoother, more balanced spinning. What it does:

• Acts as a counterweight around the washer tub to help reduce vibration and wobbling during high-speed spins
• Helps decrease noise caused by an unbalanced load or damaged tub support
• Can prevent excessive movement that may cause wear to suspension components
• Commonly replaced when you see persistent shaking, loud knocking during spin, or visible damage to the ring

• One balance ring assembly

• Designed for use with compatible top-load washer tubs; confirm fit for your model before ordering
• Basic mechanical skill and common hand tools required; larger repairs may require tub removal
• Disconnect power and water supply before starting any repair to avoid injury or damage

This part is a replacement drum assembly. This part's intended use is to repair a broken or defective drum assembly in washing machines.The drum is a perforated tub that holds the laundry inside the washing machine and rotates to efficiently wash and clean clothes and materials. This part is essential and will need to be replaced if it becomes worn, bent, dented, or otherwise unable to function properly. It's important that the appliance is unplugged before any attempt is made to replace this part. Work gloves are recommended for proper safety and protection.This is a genuine OEM part made by LG and has been sourced directly from the manufacturer. This is an authentic OEM replacement part made of high-quality materials. This drum assembly can be used with different models of washing machines that have been manufactured by LG, Kenmore, and some other brands. It is sold individually.

Kit Includes Front & Rear Outer Tubs with bearing Plus One Gasket. Bearings not available seperate.

This balance ring assembly stabilizes the washer's inner tub to reduce vibration and wobbling during spin cycles, helping the washer run smoother and quieter when the original ring is cracked, worn, or leaking. What it does:

• Dampens and balances the inner tub to reduce shaking and excessive movement during high-speed spins
• Helps minimize noise caused by an unbalanced load or damaged ring
• Prevents persistent wobble that can stress suspension and other components
• Restores proper tub alignment when an original balance ring has separated or deteriorated

• Disconnect power (and water, if applicable) before starting any repairs.
• This part typically requires partial drum disassembly; follow the manufacturer's service instructions.
• Use appropriate tools and take care handling the tub—parts can be heavy and awkward.

This tub front is the front bulkhead that supports the dryer drum and front drum seal, restoring proper drum alignment and helping reduce rubbing, squeaks, and wear on rotating components. What it does:

• Supports the dryer drum at the front and provides a mounting surface for the front drum seal.
• Keeps the drum centered to allow smooth, even tumbling.
• Prevents clothes from catching or rubbing on the cabinet by maintaining correct drum clearance.
• Commonly replaced when the front surface is cracked, warped, or the seal area is damaged, causing noise or rubbing.

• One tub front (front bulkhead) as shown.

• Disconnect power to the appliance before starting any repair.
• Replacement typically requires removing the dryer front panel and drum; keep fasteners and note seal orientation.
• Use basic hand tools; some models may require lifting the drum slightly to set the tub front.
• If seals, bearings, or felt guides are worn, replace them at the same time for best results.

This outer tub replaces the washer's outer wash tub that holds the inner drum and directs water during cycles. Installing a new outer tub restores the washer's ability to contain water and maintain proper drum alignment. What it does:

• Houses and supports the inner tub/drum so laundry spins safely
• Directs wash and rinse water to the drain path
• Prevents leaks when intact; cracks or damage can allow water to escape
• Helps maintain correct drum alignment to reduce noise and vibration

• One outer tub

• Disconnect power and water supply before starting work
• May require disassembly of the cabinet, inner tub, and associated seals; follow OEM instructions
• Inspect and replace related seals, gaskets, or fasteners as needed

Note: Comes with rear bearing (not available separately)

This top load washing machine outer tub assembly includes the tub bearing and the integral spinner clutch system. The clutch bearing is incorporated into the main housing. NO additional shipping fee required due to weight or size.

The Washer Tub Cover Assembly is an essential component for your Samsung washer, ensuring optimal protection and performance. This genuine OEM part is specifically designed to fit a range of Samsung washer models, providing a secure and seamless installation. Made from durable materials, the cover assembly safeguards the washer tub from everyday wear and tear, helping to extend the lifespan of your appliance. By replacing a cracked, damaged, or missing cover with this genuine OEM part, you can restore your washer's functionality and maintain its efficiency. The Washer Tub Cover Assembly not only enhances the appearance of your washer but also ensures that all components remain protected and operate smoothly. Trust in this high-quality, genuine OEM part to deliver reliable performance and keep your Samsung washer running like new, offering you a hassle-free laundry experience.

Outer tub assembly includes: outer tub, tub seal, drive shaft and bearings. To rebuild the tub, order the bearing and tub seal kit W10435302 and the bearing installation tool W10447783.