Washer Hinge Parts

Left side hinge

This lid hinge pad fits between the washer lid hinge and the cabinet. It cushions the joint to reduce squeaks and metal wear, helping keep the lid aligned and operating smoothly.

• Provides a protective wear surface between the hinge and cabinet/lid
• Reduces squeaks, creaks, and rattling when opening or closing the lid
• Helps maintain proper lid alignment and smooth movement
• Common signs it's worn or missing: squeaking lid, rubbing/scuff marks at the hinge, loose or wobbly lid

• Disconnect power to the washer before servicing
• Support the lid to relieve hinge tension and access the hinge area per your model
• Remove the worn pad and press the new pad fully into the hinge location
• Test lid operation; inspect the opposite hinge and replace its pad as needed if your model uses two

This left-hand lid hinge mounts to the washer top and lid, allowing the lid to pivot smoothly and sit square. Replacing a worn or cracked hinge restores smooth opening/closing and helps the lid lock align correctly for reliable cycle starts. What it does:

• Supports and pivots the lid on the left side
• Maintains proper lid-to-top alignment and spacing
• Helps the lid lock/switch engage correctly
• Common symptoms: lid misalignment or wobble, binding/squeaking at the hinge, visible cracks, lid won't close flush or lock

• One left-hand lid hinge

• Disconnect power before servicing; protect the lid (especially glass) from stress
• Support the lid while removing hinge fasteners to prevent damage
• Move the lid carefully to install the new hinge; do not overtighten screws
• Verify alignment and lid lock operation before running a cycle (left/right is referenced facing the appliance front)

Note: Can also use equivalent part# WP34001192.

The Dryer Hinge Guide is essential for maintaining the smooth operation of your Samsung dryer. This genuine OEM part ensures a perfect fit, restoring the functionality of your appliance with ease. Designed specifically for Samsung dryers, the Dryer Guide Hinge provides reliable support and stability, allowing the dryer door to open and close smoothly. Its durable construction helps prevent wear and tear, extending the lifespan of your dryer. Installing this guide hinge can resolve issues such as door misalignment or difficulty in opening the dryer, enhancing your overall user experience. Trust in the quality of a genuine OEM part to keep your Samsung dryer performing efficiently and effectively. Whether you're replacing a damaged hinge or upgrading your appliance, the Dryer Guide Hinge is a dependable solution for maintaining your dryer's performance.

This door latch assembly secures the appliance door closed so cycles can start and run safely. A worn or damaged latch can prevent the door from locking, stopping the unit from operating or causing it to pause mid-cycle.

• Engages with the door strike to keep the door closed and locked during operation
• Faulty latches can lead to the door not locking, cycle not starting, or errors indicating an open door
• Also cause intermittent stopping if the latch doesn't stay engaged

• Disconnect power before servicing
• Handle wiring connectors carefully; note their positions for reassembly
• Align the latch with mounting points and tighten fasteners securely
• Test door closure and operation before returning to service

This lid bumper cushions the contact point between a washer lid and the top panel to reduce slamming noise and protect the finish. Replacing a worn or missing bumper restores smooth, quiet lid operation and helps prevent paint damage.

• Provides a soft stop between the lid and top to minimize noise and vibration
• Helps prevent chips, scratches, and rust where the lid meets the cabinet
• Maintains proper lid spacing for a solid, rattle-free close
• Common signs it's needed: missing/flattened bumper, louder closing, rattling, or visible wear at contact points

• Disconnect power before servicing
• Open the lid, remove the old bumper, and clean the mounting area
• Seat the new bumper fully in the mounting location as designed
• Open/close the lid to ensure quiet, secure contact

This top hinge supports the hinged top or upper panel, allowing it to lift for service and close securely. Replacing a worn hinge restores smooth motion and proper alignment to help eliminate wobble, scraping, or gaps.

• Provides the pivot point for lifting the top/panel
• Maintains alignment and helps the top seat flat when closed
• Restores smooth opening/closing without binding or rubbing
• Common signs of failure: loose or uneven top, squeaks, difficulty lifting/closing, visible bending or cracks at the hinge

• Disconnect power; also shut off gas and allow all surfaces to cool
• Support the top/panel while removing and installing the hinge to prevent strain
• Transfer and tighten existing mounting screws unless new hardware is provided
• After installation, check alignment and clearances; replacing hinges in pairs can improve fit

This replacement hinge supports and guides the appliance door for smooth opening and closing, restoring proper alignment and helping the door seal correctly. Ideal when a worn hinge causes sagging, noise, or improper latching. What it does:

• Provides a secure pivot point so the door opens and closes smoothly.
• Keeps the door aligned to maintain a proper seal and prevent gaps.
• Reduces hinge noise, scraping, or binding during door movement.
• Common symptom indicators: door sagging, door doesn't stay closed, uneven gap, or noisy operation.

• Disconnect power (and water, if applicable) before starting any repair.
• Support the door while removing or installing the hinge to prevent the door from falling.
• Use the correct hand tools; snug fasteners securely but avoid overtightening.

Right hand side. For screws use WPW10119828.

This door hinge secures and lets the refrigerator door pivot for smooth opening and reliable closing. Replacing a worn or damaged hinge helps restore proper door alignment and prevents rubbing, sagging, or uneven gaps. What it does:

• Holds the door to the cabinet and provides the pivot point for opening and closing.
• Restores correct door alignment to stop scraping, binding, or uneven sealing.
• Helps eliminate door sag that can cause gaps or improper closing.
• Matches the OEM fit and mounting points when replacing a failed hinge.

• Disconnect power to the appliance and remove food and shelves from the door before starting.
• Support the door while removing the old hinge to prevent dropping or damage.
• Reuse or replace mounting hardware as needed; tighten fasteners securely and check alignment after installation.

This metal door hinge secures and guides the refrigerator door, restoring proper alignment and smooth opening. Replace a worn or damaged hinge to stop sagging doors and reduce binding or uneven gaps for a reliable seal and easy access. What it does:

• Provides pivot support so the door opens and closes smoothly
• Keeps the door aligned to maintain an even gasket seal and consistent cooling
• Replaces bent, worn, or noisy hinge hardware that causes door sagging or rubbing
• Helps prevent further wear to the cabinet and door by restoring correct movement

• One door hinge

• Unplug the appliance and empty or support the door before removing hinge hardware
• Use the correct tools and keep track of screws and any shims or spacers
• Check door alignment and gasket sealing after installation; adjust as needed

Door hinge that restores proper door alignment and smooth pivoting for your refrigerator. Replacing a worn or bent hinge helps stop door sag, rubbing, and uneven gaps so the door seals and closes reliably. What it does:

• Supports and pivots the refrigerator door to keep it aligned and moving smoothly
• Helps stop door sagging, rubbing, sticking, or uneven gaps around the door
• Reduces door noise and wear by restoring stable pivot action
• Helps maintain a consistent door seal to limit moisture and cold-air loss

• Disconnect power and remove food and loose items from the door before starting work
• Support the door while removing fasteners to prevent dropping or damage
• Compare the new hinge to the old one for orientation before installing; tighten fasteners securely but avoid over-tightening

Left hand side.

A hinge pin assembly that secures and aligns an appliance door to its cabinet, restoring proper fit and smooth opening and closing while reducing hinge noise. What it does:

• Secures the door pivot and maintains proper door alignment for a consistent seal.
• Can correct door sag, uneven gaps, or doors that stick, scrape, or fail to close fully.
• Can reduce grinding, clicking, or binding noises caused by worn or bent hinge pins.
• Replaces worn, broken, or bent hinge components that affect door motion.

• Disconnect power to the appliance before beginning any repair.
• Support the door (use a helper or suitable block) to prevent it from dropping when removing the hinge.
• Basic hand tools are typically required; follow the manufacturer's service instructions for safe removal and reinstallation.
• Inspect adjacent hinge mounts and fasteners during installation; replace damaged mounting hardware as needed.

This right-hand lid hinge secures and guides the appliance lid for smooth, controlled opening and closing—restoring proper alignment and preventing the lid from sagging or binding. What it does:

• Supports the lid on the right side and maintains alignment during use
• Guides smooth opening and closing to prevent sudden drops or catches
• Replaces cracked, bent, or worn hinges that cause uneven gaps or misalignment
• Helps restore lid stability so it stays open or closes evenly

• Disconnect power before beginning any repair and work on a dry, stable surface
• Support the lid while removing and installing the hinge to prevent injury or damage
• Typical installation uses common hand tools (screwdriver/socket); follow OEM diagram for correct fastener locations
• Inspect mounting screws and mating surfaces; replace any damaged hardware for a secure fit

This door hinge secures and guides a refrigerator/freezer door, restoring smooth swinging and proper alignment so the door seals correctly and operates reliably. What it does:

• Provides a pivot point to open and close the appliance door
• Restores correct door alignment and prevents sagging or uneven gaps
• Eliminates rubbing or binding that can cause noise during operation
• Helps the door close fully to maintain proper cooling and seal

• One door hinge

• Disconnect power and remove food from door areas before starting
• Support the door while removing fasteners to prevent drop or damage
• Use appropriate hand tools; avoid overtightening fasteners when installing
• Check door alignment and gasket seal after installation; make adjustments as needed