Washer Hose Or Tube

This flexible replacement hose routes water inside the appliance to restore proper water flow and prevent leaks. Built to match the original shape and connections for a direct-fit repair when the original hose is damaged. What it does:

• Transfers water between internal components to enable normal operation
• Prevents leaks caused by cracks, splits or worn material
• Helps stop intermittent or reduced water flow when the original hose is compromised
• Restores secure connections at existing fittings when installed correctly

• One replacement hose

• Disconnect power and shut off the water supply before starting the repair
• Inspect matching fittings and clamps; reuse only compatible hardware or replace as needed
• Seat hose fully on fittings and secure with appropriate clamps to prevent leaks
• After installation, restore power/water and run a short cycle while checking for leaks

This pump hose channels washer tub water to the drain pump, restoring proper drainage and preventing leaks at the pump connection. Durable flexible tubing designed to match factory fit and routing. What it does:

• Transfers wash water from the tub to the drain pump for normal draining
• Replaces cracked, collapsed, pinched, or leaking pump hoses that cause poor drainage
• Helps stop leaks that can occur where the tub outlet connects to the pump
• Restores reliable water flow when the original hose is brittle or damaged

• Disconnect power and water before installing; follow all safety precautions
• Inspect clamps and surrounding fittings; replace clamps if damaged or corroded
• Ensure proper routing and secure clamps to avoid kinks or contact with moving parts
• Test a short cycle after installation to check for leaks

This vent hose directs dryer exhaust from the appliance to the home vent, helping remove moisture and lint so clothes dry efficiently and the dryer runs safely. It replaces a worn or damaged exhaust connection. What it does

• Channels hot, moist air from the dryer to the exterior vent to prevent moisture buildup.
• Helps reduce drying times when unrestricted and properly installed.
• Prevents lint accumulation at the appliance connection when intact.
• Common symptom: longer drying cycles or dryer overheating when the hose is crushed, disconnected, or damaged.
• Common symptom: visible lint buildup around the dryer outlet or exhaust connection.

• One vent hose.

• Disconnect power (and gas, if applicable) before servicing the dryer.
• Inspect clamps and the vent path; replace any damaged clamps or crushed ducting.
• Avoid sharp bends or kinks; maintain a smooth, short run for best airflow.
• Wear gloves to protect hands from sharp edges and lint; follow all manufacturer safety instructions.

This replacement drain hose routes wastewater away from the appliance to the household drain so your unit can empty reliably and avoid standing water. Designed to match the original fit and flow path for easy replacement. What it does:

• Carries waste water from the appliance to the home drain or pump outlet
• Helps prevent water backup, pooling, or slow draining when functioning correctly
• Replaces cracked, split, or deteriorated hose that can cause leaks
• Restores the intended water flow path to reduce the risk of overflow or damage

• Disconnect power and shut off water supply before beginning any repair
• Remove and replace the old hose, using existing clamps or new clamps rated for appliance use
• Route the hose to match the original path; avoid kinks or tight bends that restrict flow
• After installation, restore power/water and run a short cycle to check for leaks

This flexible drain hose routes wastewater from the appliance to the household drain, preventing standing water and enabling normal drain cycles. Use it to replace a cracked, leaking, kinked, or clogged discharge line. What it does:

• Carries drained water from the appliance to the house drain or garbage disposal
• Stops leaks and drips caused by damaged or cracked hoses
• Restores proper draining when blockages or kinks have restricted flow
• Helps prevent water backup inside the appliance

• One drain hose

• Disconnect power to the appliance and turn off water before starting any work
• Remove and replace hose; secure both ends with proper clamps
• Avoid sharp bends or tight loops that can restrict flow; route hose per OEM routing
• Inspect connections and run a short test cycle to check for leaks after installation