Washer Hose Or Tube

These replacement 6" FXF vacuum bags capture dust and debris to restore pickup performance and keep the appliance's airflow and motor compartment cleaner. Designed as a direct-fit consumable for compatible bagged upright and canister vacuums. What it does:

• Collects dirt, dust and debris so particles stay contained for easier disposal
• Helps maintain suction by keeping the vacuum's intake and motor chamber clearer
• Reduces dust and allergen re-distribution compared with a torn or overloaded bag
• Replaces worn or full bags that cause reduced capacity, visible dust escaping, or increased odor

• Always unplug the vacuum before removing or installing bags
• Remove the full bag carefully to avoid spilling debris; seal and dispose per local regulations
• Verify correct orientation and secure fit before operating to avoid leaks
• Replace bags regularly; inspect the inlet collar and seals for wear when servicing

This replacement drain hose routes wastewater from the appliance to the household drain, restoring proper draining and preventing leaks or backups. It's a direct-fit service part when the original hose is damaged or clogged. What it does:

• Carries wastewater from the appliance pump to the household drain
• Prevents leaks and reduces risk of water pooling or slow draining
• Replaces cracked, split, or collapsed tubing that causes poor drainage
• Restores proper flow when original hose is kinked or obstructed

• Disconnect power and water supply before beginning any work.
• Verify hose routing and secure clamps or fittings to prevent leaks.
• Inspect adjoining fittings and replace clamps or seals if worn.

This 6-foot rubber hose provides a flexible, durable connection for appliance water/drain routing, helping restore proper flow and reduce leaks. Designed as a direct replacement hose where a 6' rubber line is required. What it does:

• Replaces worn, cracked or brittle 6' rubber hose to stop or prevent leaks.
• Restores flexible routing for water supply or drain lines that need a 6-foot rubber connection.
• Helps eliminate kinks and restricted flow caused by damaged hoses.
• Compatible with standard hose clamps or quick-connect fittings used on many appliances.

• Turn off water and power to the appliance before starting any work.
• Inspect fittings and clamps; replace clamps if corroded or damaged for a secure seal.
• Push hose fully onto the fitting and secure with the proper clamp type; test for leaks before returning appliance to service.

This drain hose directs wastewater away from the appliance to the household drain, helping prevent standing water and poor drainage. Durable, flexible construction lets you route the hose for a secure connection. What it does:

• Carries wastewater from the appliance pump to the household drain or garbage disposal
• Restores proper draining when the existing hose is cracked, split, or clogged
• Helps prevent leaks and water pooling caused by damaged or collapsed hoses
• Allows proper routing to avoid kinks that can restrict flow

• Disconnect power to the appliance and turn off the water supply before starting
• Inspect hose clamps and connections; replace clamps if corroded or loose
• Route the hose without sharp bends or kinks and secure per the appliance's routing path

This replacement trap sits in the dishwasher's sump/filtration area and captures larger food particles before they reach the pump. It helps maintain cleaning performance and reduce clogs that can lead to poor wash results or draining issues.

• Screens debris to protect the wash and drain pump
• Helps maintain proper water circulation and draining
• Damage or warping can let debris bypass the filter system
• Symptoms include poor cleaning, standing water, unusual grinding noises, or odors

• Disconnect power and shut off water supply before servicing
• Remove the lower rack; take out the lower spray arm and filters to access the trap
• Release the trap's locking tabs/fasteners, remove, and seat the new trap fully
• Reinstall filters and spray arm; run a short cycle to check for leaks and proper operation

The Drain Hose is an OEM part for Whirlpool washing machines. It is a flexible tube that diverts water from the washer tub during drain cycles, guiding it out of the appliance and into a nearby drain source such as a sink. 

Causes of a bad drain hose can include cracks or abrasions developing over time due to repeated bending and flexing during drain cycles. Mineral or hard water buildup inside the hose can also lead to clogs. Other potential causes are physical damage from rodents, pets, or accidental punctures.

Symptoms of a bad drain hose include:

• Incomplete draining or water remaining in the washer tub after cycles  
• Leaks or drips forming around the drain hose connection point
• Puddles or water pooling under or around the washing machine
• Slow drainage during spin cycles

This replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washer models.

This replacement hose routes fluid or air within your appliance, providing a secure, leak-resistant path between components. A cracked, brittle, or kinked hose can cause leaks or performance issues—replacing it helps restore proper operation.

• Provides a sealed pathway for water or air between internal components
• Supports correct fill, circulation, draining, or pressure sensing as designed
• Prevents leaks at connections when properly clamped and routed
• Common symptoms: visible cracks or kinks, water leaks, standing water, or related fault/error codes

• Disconnect power; shut off the water supply
• Place towels or a pan to catch residual water before removal
• Note hose routing and clamp positions; take photos for reference
• Reuse or replace clamps as needed; secure connections and check for leaks after reassembly

This replacement 5-foot fill hose with elbow delivers water from the household supply to the appliance, restoring proper fill flow and helping stop leaks from worn or damaged inlet lines. Designed as a direct-replacement assembly for compatible refrigerators. What it does:

• Carries water from the supply valve to the appliance's inlet connection.
• Elbow fitting provides a low-profile connection to reduce kinking at tight inlets.
• Replaces cracked, split, or leaking hoses that can cause slow/no fill or visible leaks.
• Restores reliable water delivery for ice makers and dispensers when the original hose is failing.

• Two 5' fill hoses with elbow fittings (quantity: 2).

• Shut off the water supply and unplug the appliance before starting any work.
• Inspect fittings and replace any damaged clamps; hand-start fittings, then tighten with an appropriate wrench—do not overtighten.
• Check for leaks after turning the water back on and run a fill cycle to verify proper operation.

This replacement hose routes water where the appliance needs it, helping restore proper filling and draining to prevent leaks or poor performance. Designed to match the original fitting and flow path for a reliable repair. What it does:

• Directs water between components to enable normal fill and drain cycles
• Prevents leaks when properly connected and clamped
• Restores proper drainage and prevents standing water or slow emptying
• Helps stop symptoms like intermittent filling, error codes related to water flow, or visible leaking

• Disconnect power and shut off the water supply before servicing
• Inspect and replace any worn clamps or fittings for a secure seal
• Route hose as original to avoid kinks and ensure proper flow

This genuine replacement drain hose carries wastewater from the appliance to the household drain, restoring proper draining and preventing backups. It fits the original connection points and matches OEM flow routing for reliable performance. What it does:

• Channels wastewater from the appliance pump to the household drain line
• Helps prevent standing water and incomplete draining cycles
• Restores proper drain path after hose damage, kinks or leaks
• Works with the factory fittings and clamps for a secure connection

• Disconnect power and water supply before starting work to avoid shock or flooding.
• Inspect hose routing and clamps; replace clamps if worn and secure hose to prevent kinks.
• Ensure connections are tight and test for leaks by running a short cycle.