Cooktop Igniter

This replacement top burner ignitor produces the spark needed to light gas on surface cooktops, restoring reliable ignition so burners light consistently. Ideal for repair of a single surface burner assembly. What it does:

• Generates the spark that ignites gas at a surface/top burner
• Replaces a cracked, broken, or non-sparking electrode
• Helps correct symptoms such as continuous clicking with no ignition, burners that won't light, or intermittent sparking
• Works as the electrode/ignition source mounted next to the burner cap

• Always disconnect power to the range and turn off the gas supply before servicing
• Handle the ceramic/porcelain insulator and electrode tip carefully to avoid damage
• Use basic hand tools;

This single surface burner spark electrode generates the spark that lights the gas on your cooktop or range. Replacing a worn or cracked electrode restores reliable ignition and reduces "click with no flame" at that burner.

• Creates a high-voltage spark at the burner to ignite gas
• Positions the spark at the burner head via a ceramic-insulated tip
• Common symptoms: burner won't light, no spark at that burner, or intermittent ignition
• Visual clues of failure can include cracked/chipped porcelain or a burned electrode tip

• Disconnect electrical power and shut off gas supply before servicing
• Allow the appliance to cool; remove burner cap/head to access the electrode
• Seat the ceramic insulator fully and position the tip correctly near the burner
• Reassemble and test ignition before finalizing the repair

This igniter top is the spark electrode that produces the spark to light a gas cooktop burner, restoring reliable ignition for safe cooking. It replaces the worn or damaged electrode that fails to spark or lights intermittently. What it does:

• Sends the spark to ignite the burner when the control is turned on.
• Commonly used when burners click but do not light or flame is slow to ignite.
• Helps stop continuous sparking caused by cracked or misaligned electrodes.
• Works with the burner cap and gas valve to ensure consistent ignition.

• One igniter top (spark electrode) as shown

• Disconnect power and shut off gas supply before attempting replacement.
• Handle the ceramic insulation carefully to avoid cracking; inspect wiring and connectors for damage.
• Verify correct part number and fit with your appliance diagram before ordering.

By Frigidaire. Flat Norton style oven igniter. Length - 5.53 inches. Replaces any flat oven igniter with a 3.2 to 3.6 amperage draw (excluding blue ceramic igniters). Includes 2 ceramic wire connectors.

This surface igniter is the replacement spark electrode used on gas cooktop burners to create the spark that lights the burner. It restores reliable ignition so burners light when you turn the control knob. What it does:

• Produces the spark that ignites the gas at a surface/burner element
• Replaces a cracked, worn, or non-sparking electrode
• Common fix for burners that click but won't light or that fail to spark
• Works with the existing electrode wiring and mounting location

• Disconnect power to the range and turn off the gas supply before starting
• Handle the ceramic tip gently to avoid chipping; do not touch the tip with bare hands
• Confirm correct orientation and secure mounting; match wiring to original connections

This surface ignitor is the replacement part that creates the spark to light a cooktop burner, restoring reliable ignition for your gas range so burners light when knobs are turned. What it does:

• Generates the spark needed to ignite a surface burner
• Helps when a burner clicks but fails to light or only lights intermittently
• Addresses ignition problems caused by a cracked, worn or non-sparking ignitor
• Can reduce repeated clicking or delayed ignition

• Turn off the appliance power and shut off the gas supply before beginning service
• Handle the ceramic/porcelain ignitor carefully—it is fragile and can break if dropped
• Verify electrical connector is fully seated and free of corrosion before reassembly

This replacement igniter knob kit restores the ignition control and user knob for gas range burners, letting you safely operate the burner and re-establish reliable spark control. Designed as a direct-replacement style kit. What it does:

• Replaces the burner igniter control and the user knob assembly used to ignite and adjust a gas burner.
• Helps resolve symptoms such as inability to ignite a burner, intermittent or weak spark, or a loose/missing control knob.
• Restores proper knob feel and control indexing for accurate burner selection.
• Matches OEM form and function for straightforward replacement when the existing knob/igniter assembly is damaged.

• Disconnect power and turn off gas supply before starting any service; follow gas-safety precautions.
• Basic hand tools required; do not force parts—align components before tightening.
• Inspect surrounding components (switch, electrode, wiring) for damage while installing.

The Range Oven Hot Surface Igniter Assembly is an essential component for maintaining the performance of your Samsung range. This genuine OEM part ensures reliable ignition, allowing your oven to heat efficiently and consistently every time you cook. Designed specifically for Samsung range models, it guarantees a perfect fit and seamless integration with your appliance. The hot surface igniter plays a crucial role in igniting the gas, providing steady and controlled heat for baking, roasting, and other cooking needs. Replacing a faulty igniter with this high-quality assembly can restore your ovenGÇÖs functionality, preventing delays and ensuring safe operation. Easy to install, the Range Oven Hot Surface Igniter Assembly offers a durable solution to keep your kitchen running smoothly. Trust in this genuine OEM part to deliver dependable performance and enhance your cooking experience with your Samsung range.

This glow-bar oven igniter lights the gas burner. When energized, it heats and draws current through the safety valve so the bake or broil flame ignites reliably and the oven reaches the set temperature. What it does:

• Heats and ignites the oven's bake or broil burner
• Draws the correct current to open the gas safety valve
• Can address no-heat or no-ignition conditions
• Helps resolve very slow preheat or inconsistent oven temperatures
• Useful when the igniter glows but the burner never lights

• 1 glow-bar igniter

• Disconnect power and shut off gas supply before servicing
• Access from the oven cavity; remove racks, oven bottom, and flame spreader as needed
• Handle the igniter carefully—element is fragile; avoid touching the carbide/ceramic tip
• Secure connections and route wires away from flames and high-heat areas; test operation after reassembly

The Electrode & Harness Assembly is an OEM part for GE gas ranges. It features ignition electrodes and a wiring harness that facilitates oven ignition. This assembly is responsible for sending high-voltage sparks to light the oven's pilot and main burners on command.

Symptoms of a bad electrode and harness assembly include:

• Oven pilot or burners failing to ignite properly
• Delayed ignition or repeated ignition attempts needed 
• Indicator lights signaling ignition errors

Causes can be cracks, wear, or damage to the insulated electrodes from repeated heating cycles. Over time this may lead to arcing or shorting of electrical connections.

Proper sparking ensures safe and reliable cooking functions. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement spark electrode for gas burners creates the spark at the burner head to ignite the gas. It helps restore quick, reliable lighting when a burner won't ignite or only lights intermittently. What it does:

• Generates a high-voltage spark at the burner to ignite gas
• Replaces cracked, fouled, or shorting electrodes that prevent proper arcing
• Can help resolve a burner that won't light, clicking without ignition, or weak/no spark at one burner
• Supports consistent burner ignition when properly aligned and connected

• 1 ignition spark electrode

• Disconnect power and shut off gas supply before servicing
• Allow the appliance to cool; remove grates/caps and access the electrode at the burner
• Transfer any mounting hardware; seat the electrode securely and avoid stressing the ceramic insulator
• Route the lead away from heat/sharp edges and ensure all connections are fully seated

This surface burner igniter creates the spark that lights a gas cooktop or range burner. The attached wire lead simplifies hookup and helps restore quick, dependable ignition when a burner won't light or only lights intermittently.

• Generates a high-voltage spark at the burner to ignite gas
• Restores reliable burner lighting and consistent flame startup
• Common symptoms: burner won't ignite, no visible spark, intermittent lighting, or a chipped/cracked ceramic insulator
• Replaces a worn or damaged electrode to eliminate the need for manual lighting

• Disconnect electrical power and shut off gas before servicing
• Allow the cooktop/range to cool; handle the ceramic tip carefully to avoid damage
• Match the igniter position/orientation to the original for proper spark at the burner
• Route the lead away from sharp edges and heat; make a secure connection to the harness, then test for spark before reassembly

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.