Cooktop Parts

My tenant thought that the oven safety valve was bad, but after some research, I found that the transfer of heat from the igniter had to be sufficient enough to cause the valve to open.Your agent confirmed this and reassured me that even if the igniter was glowing, there was a 99% chance that it wasn't getting hot enough. I ordered the igniter, and also the safety valve just in case, as we were going to be fixing this on Christmas eve, so the oven could be used for Christmas dinner. Your agent... Read more

Put in a new infinite switch behind the knob to control temp level. Read more

• Little to no heat when broiling
• Element will not heat

I ordered the replacement part; after it arrived, I turned off the power to the oven - watched the video on how to replace the part, which was fantastic as it told me to make sure when I disconnect the old element not to let the wires fall behind the oven (that would have been a big problem b/c it's a wall oven) - However, one wire still slipped back a little - so I used needle nose pliers to retrieve it. Was able to plug the new one in - screw it into place with the original screws. I made... Read more

Replaced Read more

• Little to no heat when broiling

I needed to replace the oven broil element on my 15 year old GE range/oven unit. The broil element was broken in half during an oven self-cleaning cycle. Due to the age of the oven, I decided to replace both the broil and bake elements. I ordered the elements from Appliance Parts Pro. Their web site made it very easy to identify and locate the correct replacement parts. The parts arrived in 2 days. I watched the repair demo videos available for each element. Although the oven used in the demo... Read more

Looked up the part number at Appliance Part Pros, ordered the window pack (received it the next day), and replaced the glass assembly. Was generally able to follow illustrated parts breakdown as a guide. Read more

• Element will not heat
• Won't start

Full disassembly of removable tray into top plate (stainless) and lower pan taking care not to loose fasteners. Removal of terminal blocks using lubrication on rusted screws and, if necessary, drill out technique. Unclip wires from edges of the tray on both sides without losing the clips for future re-use. Top plate is now completely free of connections and may be cleaned/scrubbed separately in advance of re-assembly. Unfasten spade insulation block (located in the front of the tray) after... Read more

• Touchpad does not respond

Ordered all the parts needed, replaced them and the Jenn Air worked just fine. Read more

Order the part from you all. Watched the video how to install, which was easy to understand. the part arrived A DAY EARLIER than we expected! How nice is that? and installed part, stove /oven works. everybody's happy. Read more

I checked a couple stores for a new filter but no one had the exact size I needed, so I went online and ordered one from Appliance Parts Pros. I ordered it late one night and by the morning of two days later, I received a brand new one. I popped in place and it looks great. I was really impressed with the fast service. Read more

Replaced defective/worn surface unit and burnt receptacle! Read more

Turned off the power. Pulled out the stove. Removed back of upper part of stove. Removed old control board. Took photos with phone to make sure I got wires back on correctly. Only 1 wire was difficult to remove and required gentle rocking with pliers. Put the overlay on the new board. Placed all the clips and wires back on the new board. Turned on power to test. Tested ok. Turned power off and resecured the board and back on the stove. Repositioned the stove. Turned power back on. I... Read more

I removed all the individual burners so I could lift the stainless cover to expose the igniter wires. I cleaned all the wire connections and the 4 good igniters and replaced the one bad igniter. Reassembly was easy and everything worked properly when done. Video of repair was helpful and all parts ordered were correct and shipped promptly and I will definitely use AppliancePartsPros again. Read more

I removed the oven door, removed all screws, detached the front from the rear, carefully took out broken glass, replaced with new (smaller sized than original, but worked), reattached front and rear panels, replaced screws, and replaced door to finish. Read more

Oven door would no longer close completely, ordered replacement hinges, 30 minute repair. Read more

I unplugged the stove ,cut the 50 amp cord off from the terminal block as it was burned took out the terminal block as it to was all melted .installed the new terminal block with a new stove cord back in business Read more