Damper & Related

The Refrigerator Insulation Damper Assembly is an essential component designed to regulate airflow within your Samsung refrigerator. This assembly plays a crucial role in maintaining optimal temperature balance between different compartments, ensuring your food stays fresh and properly stored. By controlling the cold air distribution, it helps enhance the overall efficiency of your appliance, contributing to energy savings and consistent cooling performance. Constructed from high-quality materials, this genuine OEM part guarantees durability and reliability, matching the exact specifications of your Samsung refrigerator model for a seamless fit. Installation is straightforward, allowing you to replace a faulty or damaged insulation damper assembly with ease, restoring your fridgeGÇÖs functionality without the need for professional assistance. Whether you're experiencing uneven cooling or noticing increased energy consumption, the Refrigerator Insulation Damper Assembly offers a practical solution to maintain the performance and longevity of your appliance. Trust in this genuine OEM part to keep your Samsung refrigerator operating smoothly and efficiently.

This damper is the vent backdraft flap that opens to let exhaust out and closes to keep outside air and odors from coming back into the appliance. It restores proper airflow control for venting systems. What it does:

• Opens when the fan runs to allow exhaust to flow through the vent
• Closes when the fan is off to prevent cold air, smells, and pests from entering
• Stops rattling or restricted airflow caused by a stuck or damaged flap
• Works as the airflow control element inside the vent housing or duct

• One damper assembly

• Disconnect power to the appliance before starting any repair
• Access the vent or hood housing per the appliance service instructions; removal of grille or access panel may be required
• Remove the old damper and any mounting hardware; install the new damper in the same orientation
• Check that the damper moves freely after installation and that duct connections are secure

This upper vent cover replaces the visible duct cover on a range hood to restore proper appearance and help channel exhaust air. It provides a finished look and protects ductwork from grease and debris. What it does:

• Covers the vent duct above the hood for a clean, finished appearance
• Helps direct exhaust up into the duct while protecting internal components from dust and grease
• Use when the original chimney is dented, cracked, or cosmetically damaged
• Reduces visible gaps between the hood and ceiling when properly installed

• Designed to mount to the hood body or chimney assembly; follow OEM mounting points
• May require removal of the hood's grease filters or upper panel for access
• Ensure power is off to the appliance before starting work to avoid electrical hazards
• Replace damaged ducting or fasteners as needed for a secure fit

This adapter is a small connector used to join compatible appliance lines or fittings, restoring a secure connection and preventing leaks or loss of function. It's a direct replacement when the original adapter is cracked, corroded, or damaged. What it does

• Connects two mating hoses, tubes, or fittings to re-establish a sealed pathway
• Restores proper flow and helps stop leaks from worn or broken adapters
• Commonly used where a compact, durable coupling is required
• Works as a like-for-like replacement when the original adapter is missing or damaged

• One adapter

• Disconnect power and shut off water or supply lines before servicing
• Verify matching thread type/orientation before installation to avoid cross-threading
• Hand-start threads, then tighten to manufacturer torque; do not overtighten
• Inspect for leaks after restoring power/supplies and running the appliance

This flue directs exhaust and heat away from the oven cavity to the range vent path, helping maintain proper ventilation and combustion airflow. It replaces damaged or corroded flue components to restore safe venting and oven performance. What it does:

• Channels heat, smoke and combustion exhaust from the oven cavity toward the vent path
• Helps prevent heat buildup behind the oven control area and adjacent panels
• Can reduce visible soot, odors or poor venting caused by a cracked or bent flue
• Supports proper burner combustion airflow in gas models when correctly installed

• One replacement flue

• Disconnect the appliance from power (and gas supply on gas models) before starting work
• Access typically requires removing the oven back panel or drop-in cooktop; keep track of mounting screws and gaskets
• Wear gloves to protect from sharp sheet-metal edges and use caution aligning the flue to vent openings
• After installation, restore power/gas and verify normal oven operation and proper venting; check for signs of leaks or loose fasteners

The Refrigerator Cover Assembly is an essential component for maintaining your Samsung refrigerator's integrity and appearance. This genuine OEM part ensures a perfect fit and seamless integration with your appliance, restoring both functionality and aesthetics. Crafted from durable materials, the cover assembly protects your refrigerator's interior from spills and debris, making cleaning easier and keeping your fridge looking new. Its easy installation process allows you to replace a worn or damaged cover assembly without hassle, saving you time and effort. Compatible with a wide range of Samsung refrigerator models, this cover assembly provides reliable performance and long-lasting durability. By choosing this genuine OEM part, you can trust in the quality and reliability that Samsung is known for, ensuring your refrigerator operates smoothly and maintains its optimal condition. Enhance your fridgeGÇÖs functionality and appearance with the Refrigerator Cover Assembly .

The Air Damper is an OEM part for Whirlpool refrigerators. It is a component located inside the fridge behind the evaporator cover that controls the flow of cold air circulating throughout the fridge compartment. The damper opens and closes to direct air as needed to efficiently maintain set temperatures.

Symptoms of a bad air damper include:

• Inability to achieve or maintain proper fridge temperatures 
• Condensation buildup inside 
• Frosted evaporator cover
• Warm or cold spots in different areas of the fridge

Causes of a bad damper can be wear and tear of the movable parts over time, failure of the actuator motor that powers it, or damage from accidental blocking of the damper mechanism.

This OEM Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This vent tube directs heated air and moisture from the appliance to its exhaust path, maintaining proper airflow around internal components. Replace a cracked, warped, or missing tube to restore safe ventilation and help prevent heat and condensation buildup. What it does:

• Channels hot air and steam from the cavity to the outlet
• Helps prevent heat accumulation around controls and adjacent surfaces
• Reduces moisture/condensation at the vent outlet
• Common symptoms: excessive warmth near the console, persistent odors/steam, visible damage, or rattling from a loose/broken tube

• 1 vent tube

• Disconnect power; shut off gas. Allow the appliance to cool completely before servicing.
• Access and attachment points vary by model; refer to your service manual or diagram for location.
• Note the tube's orientation and routing; transfer any brackets or seals from the old part if present.
• Reuse existing screws/clamps and ensure the vent path is clear after installation.

NOTE: The factory has removed the catalyst (honeycomb) from this tube adapter. The catalyst is no longer available.

This damper controls airflow between compartments to help maintain proper temperatures and consistent cooling. It replaces a worn or broken damper to restore normal airflow and temperature balance inside the appliance. What it does:

• Regulates air flow between compartments so the refrigerator can maintain set temperatures
• Helps reduce uneven cooling and temperature swings caused by a stuck or broken damper
• Works as part of the appliance's air distribution system to route cooled air where needed
• Common symptom: compartment temperature too warm or inconsistent airflow noise from the damper area

• One damper assembly

• High-level replacement; access usually requires removing interior panels or duct covers
• Disconnect power before any repair to avoid shock or injury
• Handle with care to avoid bending or damaging mounting tabs and linkage

This vent tube directs exhaust airflow from the appliance to the vent outlet, helping maintain proper ventilation and reduce leaks. Replace a damaged or crushed tube to restore safe exhaust routing and steady airflow. What it does:

• Channels exhaust air from the appliance to the vent outlet to prevent backflow into the cabinet
• Helps maintain consistent ventilation for efficient operation
• Prevents leaks and reduces the chance of moisture or lint buildup in the appliance cavity
• A worn or damaged vent tube can contribute to poor venting or unusual odors

• One replacement vent tube

• Disconnect power and unplug the appliance before beginning work
• Remove any access panels or obstructions to reach the existing tube; note routing before removal
• Secure the new tube with appropriate clamps or retainers; ensure there are no kinks or sharp bends
• If lint or debris is present, clean the vent path before installing the new tube

This replacement chimney is the exterior cover that hides the hood's ductwork and mounting hardware, restoring the finished look of your kitchen range hood and protecting internal components from grease and dust. Fits the upper section of select chimney-style hoods. What it does:

• Covers and protects ductwork and mounting brackets for a clean, finished appearance
• Helps prevent grease and dust from settling on internal hood components
• Replaces damaged, dented, or missing chimney pieces that affect appearance or fit
• Restores proper alignment of the hood's upper housing for secure installation

• One chimney upper cover

• High-level replacement — basic hand tools typically required; lift and support the chimney during installation
• Consider a second person for safe handling and alignment of the cover
• Turn off power to the hood before removing or working near electrical components

This is a replacement vent tube designed to route exhaust air and restore proper ventilation in the appliance. Replacing a damaged or clogged vent tube helps maintain airflow and reduces the risk of moisture buildup or heat retention. What it does:

• Channels exhaust or vented air away from the appliance to maintain proper airflow
• Helps prevent moisture buildup and related odors when ventilation is impaired
• Can reduce overheating or performance issues caused by restricted venting
• Restores a secure path for airflow when the original tube is cracked, collapsed, or disconnected

• Disconnect power to the appliance before beginning work; for gas appliances, turn off the gas supply.
• Use basic hand tools and avoid sharp edges on sheet-metal near the vent opening.
• Ensure all connections are seated and sealed per the appliance diagram to prevent air leaks.

This chimney is the exterior cover that finishes and protects the range hood's vertical duct area, restoring a clean, finished look and proper airflow path for vented hoods. It replaces damaged or missing hood chimneys. What it does

• Covers and conceals the hood's ductwork for a finished appearance
• Helps direct exhaust from the hood up into the household ducting
• Replaces bent, dented or missing chimney panels that expose ducts
• Restores proper fitment and alignment of the hood's upper section

• Disconnect power to the hood before servicing electrical or internal components
• May require two people to hold and align the chimney during installation
• Use original mounting hardware when possible; inspect screws/brackets and replace if damaged
• Check for proper sealing to the duct and adjust alignment for a snug fit

This damper heater is the heater element used with the refrigerator air-damper assembly to help prevent frost and condensation buildup around the damper. Replaces a failed heater to restore proper damper operation and airflow. What it does:

• Warms the damper area to reduce ice and condensation that can block the damper
• Helps ensure the fresh-food and freezer compartments share airflow as intended
• Commonly replaced when frost or ice accumulates near the damper or when the damper fails to open/close smoothly
• Works as part of the damper/air control system; does not include the full damper housing or actuators unless specified

• Disconnect power to the appliance before replacing this part to avoid shock or injury
• Access may require removing interior panels or the damper housing; follow OEM instructions for your model
• Inspect the damper housing and actuator for damage or ice buildup when replacing the heater