Dishwasher Handle

Note: Check Serial Number for correct part

The Door Latch Handle is an OEM replacement part for Whirlpool dishwashers. It is used to release the door latch and open the dishwasher door. This handle enables you to disengage the latch, allowing the door to open smoothly.

If the handle is damaged, it may become challenging to release the latch, making it difficult or impossible to open the door. Over time, this component can wear out due to frequent use or break due to accidental mishandling.

Color: White

Symptoms of a damaged door latch handle include:

• Difficulty opening the dishwasher door
• The door not opening at all
• Handle feeling loose or unresponsive

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Includes door latch, strike plate and microswitch.

This replacement door handle restores a secure grip and normal door operation on compatible Whirlpool appliances. It provides a like-for-like fit and finish to replace a damaged, loose, or worn handle so doors open and close reliably. What it does:

• Replaces a broken, cracked, or missing door handle to restore normal use
• Provides a solid grip so the door opens and closes smoothly
• Matches the original mounting points for straightforward fit
• Helps eliminate rattling or loose-handle symptoms

• One replacement handle

• Intended to be installed with the original mounting screws and hardware; only included items ship
• Turn off and unplug the appliance or shut off power at the breaker before servicing electrical appliances
• Use moderate force when aligning the handle to avoid damaging trim or fasteners

This replacement handle restores a secure, comfortable grip so you can open and close your appliance smoothly. It replaces a cracked, broken, or loose handle to bring back reliable operation and a clean, factory look.

• Provides sturdy leverage to open and close the unit's door or drawer
• Attaches to existing mounting posts or screws on compatible models
• Helps resolve issues like a loose, wobbly, cracked, or missing handle
• Restores appearance when the original handle is scuffed or damaged

• Disconnect power before servicing; also shut off water
• Protect the surface with tape or a cloth to avoid scratches during removal/installation
• Align the handle carefully; start fasteners by hand to prevent cross-threading
• Tighten evenly and only until snug to avoid damage to threads or trim

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

Color: Grey

Color: Black. Dishwasher door latch handle. For the latch order WP99002292.

Color: Black

This door latch and strike plate secure the door closed and engage the safety interlock so the appliance can start and run reliably. Replacing a worn latch restores consistent door closure and prevents nuisance cycle interruptions.

• Locks the door by engaging the strike, keeping it closed during operation
• Ensures the door-closed interlock/microswitch is actuated so cycles can start
• Helps prevent the door from popping open mid-cycle
• Common symptoms: door won't latch or stay closed, unit won't start, cycle stops when the door is jostled

• Disconnect power before servicing
• Open the door and remove the inner-panel screws to access the latch area
• Remove the old latch/strike; align and install the new components
• If your model uses a separate microswitch, transfer/reuse it as required and test door engagement before reassembly

Restore a secure, reliable door closure. This replacement door latch engages the door mechanism so the appliance recognizes the door is closed and can operate as intended, preventing nuisance "won't start" issues caused by a broken latch. What it does:

• Keeps the door closed and properly aligned with the catch
• Engages the door mechanism/switches so the unit can run when shut
• Replaces worn or broken latch hook tabs
• Common symptoms: door won't close or stay latched; unit won't start; must push/hold door to run; visible broken latch hook

• 1 door latch

• Disconnect power before servicing; wear cut-resistant gloves
• Access the door's inner panel/trim to reach the latch; protect glass and finishes
• Note spring/clip orientation if present and transfer any reusable hardware
• Test door latching and proper operation before final reassembly

The Rotating Handle is an OEM part for Whirlpool mixers. It allows you to raise and lower the mixing bowl for convenient access during the mixing process.

A bad rotating handle can be caused by regular use, accidental damage, or excessive force applied during operation. If you notice cracks, a loose or wobbly fit, or difficulty in rotating the handle smoothly, it may indicate a problem with the handle itself.

Symptoms of a bad rotating handle include:

• Cracked or damaged handle surface
• Loose or insecure fit of the handle on the mixer
• Inability to raise or lower the mixing bowl 

Replace your faulty handle with this genuine OEM part to restore your mixer. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This stainless-steel dishwasher door handle replaces a worn or damaged handle and restores a clean, flush grip on the front of the dishwasher door. It provides a durable, easy-to-grasp surface for everyday use. What it does:

• Replaces the exterior door handle so you can open and close the dishwasher smoothly; common symptom is a loose, cracked, or broken handle.
• Restores the appliance's appearance by matching stainless finishes.
• Provides a secure, comfortable grip for normal operation.
• Mounts to the door with factory fastening points.

• Always disconnect power to the appliance before servicing.
• Installation typically requires removing the inner door panel or access cover; keep track of mounting hardware.
• Use the correct hand tools and avoid overtightening fasteners to prevent damage.

This is a genuine door strike that is a replacement for several models of dishwashers. The door strike catches and latches the door so that the computer knows that it is safe to run the cycle and seal the unit. This door strike works by bending to catch the latch when closed, and can become worn over time. It may also be damaged by an object or bent in a way that affects its operation. If the door strike fails, the dishwasher may not operate until it is replaced. The unit may continue to work, but leak or not work properly. In any case, replacing the door strike with this OEM part will resolve the issue. This genuine door strike is made of durable metal and sold as an individual part. Hardware is sold separately. This door strike is manufactured to exact standards for use in select models by General Electric, including their Hotpoint brand. Be sure to wear gloves when working on appliances. A screwdriver will be needed to make this repair.

Door strike catches the door latch to keep the appliance door closed, restoring secure closure and proper operation. Replaces a worn or broken strike to help prevent the door from popping open and losing temperature control. What it does:

• Catches and holds the door latch so the door stays closed during normal use — common repair for doors that won't latch reliably
• Restores consistent door sealing to help reduce drafts and temperature loss
• Replaces the original strike at the latch assembly and mounting points
• Helps prevent issues caused by a loose or damaged strike, such as frequent door openings or poor sealing

• Disconnect power (unplug or shut off the breaker) before servicing the appliance
• Basic hand tools (screwdriver) are typically required; access may require removing inner door trim or a small access panel
• Handle the door and strike carefully; align the latch before tightening screws and avoid overtightening

This door catch and strike work together to keep the door securely closed and engage the safety interlock switch. Replacing worn pieces restores a firm latch and reliable operation when the door is properly shut.

• Aligns and engages the latch so the door stays closed during operation
• Activates the door switch so cycles can start
• Helps prevent the door from popping open mid-cycle
• Common symptoms: door won't latch without force, unit won't start, visible wear or a bent strike

• Disconnect power to the appliance before servicing
• Open the door and remove mounting fasteners to swap the catch and strike
• Adjust strike alignment/depth so the latch engages fully and the door sits flush
• Restore power and test for smooth closing and proper cycle start