Dryer Control Board

The Timer is an OEM part for GE dryers. It controls the length of the drying cycles by advancing through the cycle's various stages, including drying, cool down, and finish. This component ensures that the dryer operates for the correct amount of time based on the selected settings.

You should replace this timer if it malfunctions or fails to progress through the cycle stages properly. Common causes of a bad timer include electrical failures, worn contacts within the timer mechanism, or damage from repeated use over time.

Symptoms of a bad timer include:

• Dryer not advancing through cycles
• Dryer stopping prematurely or running continuously
• Inconsistent drying times
• Timer not moving or making unusual noises

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. This timer controls the length of the drying cycle by regulating the electrical components of the dryer, such as the heating element and motor. It ensures that the appliance runs for the set amount of time and shuts off automatically at the end of the cycle.

Causes of a bad Dryer Timer can include wear and tear over time, electrical faults such as short circuits, or damage to internal gears or contacts. A malfunctioning timer can result in improper cycle timing or failure to start or stop the dryer.

Symptoms of a bad Dryer Timer include:

• The dryer not starting or stopping as expected
• Inability to switch between cycle settings
• The timer knob not advancing or getting stuck
• Inconsistent drying results due to premature shutoff or extended cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Timer is an OEM replacement part for GE dryers, essential for controlling the duration of drying cycles. This component ensures that your dryer operates efficiently, allowing for customizable drying times based on the type and volume of laundry being dried.  

Causes of a bad timer can vary, including electrical issues that prevent the timer from advancing, physical damage from wear and tear, or a malfunction in the internal gears that control the timer's movement. 

Symptoms of a bad Timer include:

• The dryer fails to start or stop at the designated times.
• Drying cycles that run too long or not long enough, leading to either under-dried or over-dried clothes.
• Inability to select or change drying cycles, affecting the dryer's versatility and efficiency.
• Unpredictable dryer behavior, which can include random starts or stops.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Timer is an OEM replacement part for Whirlpool dryers. It accurately sequences drying functions during programmed cycles.

Symptoms of a faulty timer include:

• Inability to start or complete dry cycles  
• Drying not fully finishing within expected times
• Unexpected shutoff or prolonged run times 

Causes can be stripped internal gears or disconnected wiring terminals from extended operation.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Dryer Timer is an OEM replacement part for Whirlpool dryers. It electronically controls the different stages of the drying cycle, from initial heat up to final cool down. The timer allows for programmed cycles and ensures clothes are dried thoroughly and efficiently.

Causes of a bad dryer timer include water intrusion leading to corrosion, physical abuse from impact or overloading, or standard wear and tear on integrated circuits over many cycles.

Symptoms of a bad dryer timer include:

• Inability to start or continue drying programs
• Premature ending of cycles
• Erratic stopping and starting of drum rotation
• No heat function during drying
• Fault codes and shutdowns

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore dryers.

The Timer is an OEM part for Whirlpool dryers. This part manages the duration of the drying cycles by controlling the electrical components that power the dryer. The timer ensures that each cycle runs for the correct amount of time, enabling effective and efficient drying of clothes.

Causes of a bad Timer can include internal electrical malfunctions, wear from regular use, or damage resulting from power surges or electrical issues within the dryer.

Symptoms of a bad Timer include:

• The dryer not advancing through cycles
• The dryer running longer or shorter than expected
• The dryer not turning off at the end of the cycle
• Inconsistent drying times or cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Timer is an OEM component for Whirlpool electric dryers. It is the electronic component responsible for regulating preset drying cycles and automatic shutoff functions according to manufacturer specifications.

Causes of a faulty timer often involve general wear from years of extended use. Exposure to high internal temperatures within the dryer drum can degrade surface-mounted circuitry as well.

Symptoms of a problematic timer include:

• Inconsistent or incomplete cycles
• The washing machine not advancing to the next cycle
• The machine not starting at all

Compatible brands include Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore electric dryer models too. 

The Timer is an OEM part for Whirlpool dryers. This part manages the duration of the drying cycle. This part plays a role in the operation of your dryer, ensuring that clothes are dried efficiently and thoroughly within the predetermined time. 

Common issues include cycles that end too soon or run much longer than necessary, which can lead to clothes being damp after a cycle or excessively dry and potentially damaged. 

Symptoms of a bad Timer include:

• The dryer not starting when the timer is set and the start button is pressed.
• The dryer stops mid-cycle, which indicates that the timer contacts aren’t working properly.
• Unusual or no ticking sound from the timer.
• Clothes not drying properly due to the dryer not adhering to the selected time.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Control Board is an OEM replacement part for Frigidaire dryers. It is the central processing unit that controls all functions and operations of the dryer. The board receives input from sensors, activates heating elements and motor controls, and determines dryness levels based on temperature, moisture, and time settings. 

Causes of a bad control board can include failure due to wear and tear over time, exposure to heat and electrical stresses during normal operating cycles, as well as damage due to external impact or moisture intrusion. 

Symptoms of a bad control board include: 

• The dryer not starting or powering on
• Display/touchpad malfunctions 
• Failure to progress through cycles
• Inability to achieve set heat or time settings
• Erratic programs or operation

This OEM replacement is also compatible with Electrolux and some Kenmore model dryers.

The Timer is an OEM part for Whirlpool dryers. It controls the electrical components and the timing of the dryer cycles, ensuring that clothes are dried for the appropriate amount of time.

Over time, timers can become faulty due to normal wear and tear, electrical surges, or internal mechanical failure. If the timer motor fails or the contacts inside the timer wear out, it will no longer be able to accurately regulate the dryer’s cycle duration.

Symptoms of a bad timer include:

• Dryer not starting
• Dryer running continuously without advancing through the cycle
• Dryer stopping mid-cycle
• Inaccurate cycle times

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM replacement part for Frigidaire dryers. It is the central component responsible for regulating and monitoring all functions of the dryer. The control board monitors temperatures, runs diagnostic tests, controls the timers and cycles, and ensures proper operation of components like the drum motor, heating element, and moisture sensor. 

Symptoms of a bad control board include: 

• Dryer not turning on or operating
• Dryer not heating
• Dryer functions and cycles not working properly
• Error codes appearing 

Causes of a control board failure can be due to issues like electrical faults, moisture damage, or general wear and tear over time. 

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

60Hz

The  Dryer Timer is an OEM component specially designed for Speed Queen brand clothes dryers. This timer controls the various timed cycles - normal, delicate, fluff - as well as the automatic dryness sensor if equipped. 

Causes of a bad timer can include malfunctions due to repeated activations over time, moisture exposure damaging electronic components, or improper voltage input.

Symptoms of a bad timer include:

• Inability to select or start any drying cycle  
• Constantly running or failing to shut off automatically
• Unresponsive touch/knob controls
• Error codes or flashing lights related to timer operation

This timer is also compatible with select Asko and Crosley dryers.

The Timer is an OEM part for GE electric clothes dryers. As a central processing unit, it operates all timed drying cycles and ensures automated progression through heat, cool-down, and anti-wrinkle phases. 

Symptoms of a faulty timer include:

• Inability to advance cycles or switch settings  
• Premature ending or constant running of cycles
• Fault codes related to timing/programming errors
• Potential safety issues from uncontrolled heating 

Causes can be physical damage, moisture intrusion into electronic components, or simply regular wear over extended use. Reset buttons may no longer initialize new cycles.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Control Board is an OEM replacement part for Whirlpool dryers. As the central processing component, it works to operate all dryer functions through programmed instructions. The circuit board receives inputs to control temperature settings, cycle selections, sensors, and more.

Causes of a bad control board can include moisture damage corroding circuitry, component failures due to power surges, or normal component wear over time.

Symptoms of a bad control board include:

• Inability to select or change dryer settings/cycles
• Dryer not heating properly or venting air as expected
• Cycles failing to complete or restarting unexpectedly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board Dryer is an OEM replacement part for Frigidaire electric dryers. As the central processing unit, the control board is responsible for operating all electronically controlled systems and components that enable the drying process. It precisely coordinates heating times and temperature, drum rotation, airflow, sensors, and more.

Causes of a bad control board can include damage due to moisture intrusion, defective electronic components, or general wear and tear over extended use.  

Symptoms of a bad control board include:

• The dryer failing to start, heat or tumble clothes
• Random restarting or stopping during cycles  
• Burning smells coming from the control board area
• Error codes flashing on the display

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore electric dryer models.