Frigidaire Touch Pad

This replacement panel forms the finished control area of your appliance. It provides a sturdy mounting surface for the user interface and protects the electronics behind it, restoring proper alignment, appearance, and protection when the original panel is damaged. What it does:

• Covers and protects the control compartment and wiring
• Provides mounting points for the control board, switches, knobs, and/or overlay
• Keeps controls aligned and secure for proper operation
• Common signs it's needed: dents, cracks, broken tabs, sharp edges, or controls that won't sit flush or stay secured

• One panel

• Disconnect power at the breaker; shut off gas supply if applicable
• Wear cut-resistant gloves—panel edges can be sharp
• Transfer existing control components, brackets, and hardware from the old panel to the new one; label wires or take photos for reference
• All screws and harness connections are secure before restoring power and testing

Fix unresponsive water or ice buttons, stuck dispenser, or blank display. This control board processes touchpad inputs. Easy 10-minute DIY repair.

Adhesive control panel overlay that restores faded, peeling, or bubbled button labels on your range. Replace when graphics become unreadable or worn.

Replace worn or faded dispenser control labels that make settings hard to read. This overlay restores clear ice/water markings. Simple peel-and-stick fix.

Replaces the thin faceplate over your range control panel. Restores clear button labels when original is worn, peeling, or faded. Easy peel-and-stick.

This is the electronic control board that governs the appliance's cooling system. It interprets sensor input and user settings to run key components, helping maintain consistent temperatures when the original controller becomes faulty or erratic.

• Monitors temperature sensor feedback and executes cooling cycles to hold the selected setpoint
• Controls major components on applicable models
• May manage additional functions like defrost timing or alarms depending on model design
• Failure can present as warm or unstable temperatures, unit not starting, short-cycling/running constantly, or unresponsive temperature adjustments

• Disconnect power before service; observe ESD precautions and handle the board by its edges
• Note wire/plug locations; transfer connectors to the new board one at a time
• Secure the board in its mounting and ensure all harnesses are fully seated
• Reassemble covers/panels before restoring power and checking operation

Restores printed labels and icons on your range's electronic control panel. Replace when overlay is worn, peeling, faded, or cracked for easy-to-read settings.

Replacement touch pad overlay for range control panels. Restores clear button labels and refreshes appearance when original is cracked, peeling, or worn.

Electronic control board with integrated touch pad for freestanding freezers. Replaces failed boards with unresponsive buttons, cracked touch panels, or damaged controls.

Front-mounted dishwasher control panel with touch pad buttons and display. Replace when buttons stop responding, panel is cracked, or display is damaged.

Adhesive graphic overlay that covers the electronic control panel with printed button labels. Replace when the original becomes worn, faded, or damaged.

This is the touchpad membrane switch used on the refrigerator's dispenser control panel. It registers button presses for selecting water, ice, or other dispenser functions. Replace this part if the dispenser buttons are unresponsive, require excessive pressure, or activate the wrong function when pressed.

This is an electronic control board that mounts inside the freezer or refrigerator compartment and regulates temperature, defrost cycles, and other system functions. It receives input from thermistors and sensors to manage compressor and fan operation. Replace this board if the unit is not cooling properly, displays error codes, runs constantly, or fails to maintain the correct temperature.

Electronic touch pad control board that mounts on the freezer door. Replace if cracked, unresponsive, or damaged by power surge. Plug-in installation.

Bisque clock overlay that covers the range control panel display area. Replaces cracked, faded, or missing overlay to restore appearance and readability.

Replaces the control panel overlay on your range. Install this part when the original is faded, scratched, peeled, or has illegible markings. Restores cosmetic finish.