General Electric Drawer, Shelf, Pan

This refrigerator crisper drawer (vegetable pan) is the produce bin that slides into the fresh food section. Replacing a cracked or missing bin restores organized storage and smooth drawer operation for your fruits and vegetables.

• Holds produce in the crisper compartment and contains minor spills
• Slides on the refrigerator's drawer rails for easy access
• Helps support the crisper system when used with the cover and settings
• Common symptoms: cracked or broken bin, won't slide smoothly, falls off track, missing drawer

• Empty the compartment and remove the old bin straight out; release stops if present
• Clean and inspect drawer rails before installing the new bin
• Align the bin with the tracks and slide in until fully seated
• Handle plastic carefully; do not force into place

Refrigerator meat pan drawer for the fresh food section. It replaces a cracked or missing drawer to restore organized storage and smooth, gliding access to meat items. What it does:

• Provides a dedicated storage bin in the fresh food compartment
• Slides into the existing shelf rails for easy access
• Replaces cracked, broken, or warped pans to restore smooth operation
• Common symptoms: drawer cracked, broken tabs, falls off rails, or won't slide smoothly

• 1 meat pan drawer

• Empty the old pan and pull it straight out of the rails
• Align the new pan with the rails and push straight in until fully seated
• If clearance is limited, lift or remove the shelf above before installing

This flip-up dairy door covers the refrigerator's dairy compartment. Replace a cracked or missing cover to keep butter, cheese, and other small items organized and protected while restoring a clean, finished look to the fresh food door.

• Attaches to the dairy bin on the fresh food door and flips up/down for access
• Helps keep contents contained and protected during door opening/closing
• Restores proper hinge/latch engagement so the bin stays closed
• Common symptoms: cracked cover, broken hinge tabs, loose hinge, or missing door

• Empty the dairy bin and remove the old cover
• Align hinge tabs with the bin's pins and snap into place; no tools typically required
• Handle carefully; if very cold, let the plastic acclimate to room temperature before installation
• Open and close to confirm smooth operation and full seating

2 Per Kit

This top pan cover sits above the refrigerator's crisper drawers, creating a flat shelf surface and supporting the bins below. Replacing a damaged cover restores usable space and helps the drawers slide, align, and close properly.

• Forms the shelf surface over the produce/crisper drawers
• Supports food items and the crisper bins beneath
• Helps drawers open/close smoothly and seat correctly
• Replaces cracked, warped, or broken covers that cause sagging or misalignment

• Disconnect power and clear items from the shelf area
• Remove the crisper drawers to access the cover
• Lift out the old cover; transfer any slides or trim from the original if needed
• Set the new cover in place and reinstall drawers; handle any glass carefully

Color: white. Measures about 26 inches wide by 20 inches deep.

This shelf support is the small rear rail clip that secures a refrigerator shelf or drawer rail in place. A worn or broken support can let the shelf tilt or drop, making storage unstable.

• Holds the rear of the shelf or rail securely to the cabinet wall
• Helps correct issues like a sagging, tilting, or loose shelf
• Replaces cracked, missing, or deformed supports causing poor fit
• Restores proper alignment so bins and shelves slide/seat correctly

• Unplug refrigerator before service
• Remove the shelf/bin to access the support
• Depress locking tabs and slide the old support out; snap the new one into the cabinet slot
• Ensure it's fully seated before reinstalling the shelf

This crisper cover glass is the removable glass panel that fits into the crisper pan cover. It restores a flat, sturdy surface above the drawers and helps keep small spills contained for easier cleanup.

• Forms the shelf surface above the crisper drawers within the cover frame
• Helps contain minor spills and supports stored food items
• Replace if cracked, shattered, bowed, or missing
• Symptoms include broken glass, items tipping, or drawers rubbing the cover

• Disconnect power and clear the shelf area before starting
• Remove crisper drawers and lift off the cover frame to access the glass
• Carefully remove the old panel and seat the new glass fully in the frame channels
• Reinstall the cover and drawers, then restore power

This is the clear glass that sits atop the crisper/vegetable drawers, creating a sturdy shelf and sealing the bins to help maintain proper humidity. Replacing damaged glass restores a flat, clean surface for food storage.

• Forms the shelf surface over the crisper/vegetable drawers
• Helps seal the produce bins for better moisture control
• Replace if cracked, shattered, sagging, or missing
• Common symptoms: broken glass, unstable or uneven shelf, items tipping in the crisper area

• Unplug the refrigerator and wear cut-resistant gloves
• Remove food from the shelf, lift out the old glass carefully
• Clean the frame/ledges before setting the new glass in place
• Ensure the glass is fully seated and supported on all edges

This slide-out freezer shelf restores a smooth, stable storage surface and easy access in the freezer compartment. Replace a cracked, hard-to-slide, or missing shelf to regain capacity, organization, and the spacing your freezer was designed for.

• Provides a level storage surface and slides forward for better visibility and reach
• Secures into the side supports/rails at the designated freezer position
• Helps maintain intended spacing and airflow between freezer sections
• Typical symptoms: cracked or broken shelf, damaged tabs, won't slide smoothly, sits unevenly, or missing shelf

• Remove items from the area and support the shelf with both hands when removing/placing
• Align with the side supports/rails and slide fully into place; verify correct front/back orientation
• Do not force; ensure it is seated in the correct slots before loading
• Handle edges carefully; wear cut-resistant gloves to prevent injury

This freezer shelf trim replaces a damaged or missing edge piece on the freezer shelf. It attaches to the shelf/frame to provide a finished lip that helps contain items and restores the shelf's original fit and appearance.

• Provides the finished edge on a freezer shelf to help keep items from sliding off
• Attaches to the shelf/frame for a secure, correct fit
• Replace when cracked, warped, loose, or missing
• Common symptoms include a broken or jagged shelf edge, trim that won't stay attached, or items slipping off the shelf

• Unplug the refrigerator and remove items from the affected shelf
• Remove the shelf if needed; release and remove the old trim
• Align the new trim with the shelf/frame and press until fully seated and secure
• Do not force parts together; inspect the shelf/frame for damage before reassembly

This vegetable pan cover frame supports the glass shelf above the crisper drawers and forms the rails the drawers slide on. Replacing a cracked or warped frame keeps the shelf stable and the crisper drawers aligned and moving smoothly.

• Supports the glass shelf over the vegetable/crisper pans in the fresh food section
• Provides slide rails and alignment for the crisper drawers
• Helps prevent shelf sagging and glass shifting
• Typical symptoms: broken tabs, drawers binding or dropping, unstable or uneven shelf

• Unplug the refrigerator and remove food from the crisper area
• Carefully remove the glass insert and set it aside; wear cut-resistant gloves when handling glass
• Lift out the old frame and set the new frame onto the side supports, fully seated and level
• Reinstall the glass and drawers; confirm drawers slide smoothly

This divider guide kit replaces the guide components that support and align an adjustable divider inside the refrigerator. It restores smooth movement and secure positioning so the divider stays put and your bin or basket stays organized.

• Guides the adjustable divider along its track and keeps it centered
• Helps the divider hold position to partition storage space
• Replaces cracked, warped, or missing guide pieces
• Common symptoms: divider falls out, won't stay in place, binds, or is difficult to adjust; visible broken plastic on the guide

• Unplug the refrigerator and remove the affected bin/basket and divider before beginning
• Note the orientation and fastener locations to aid reassembly
• Use the appropriate screwdriver or nut driver; avoid overtightening into plastic
• After installation, the divider slides and locks securely

This vegetable pan cover frame supports the crisper glass and forms the top of the crisper compartment. Replacing a damaged frame restores proper drawer fit, level shelf support, and better spill containment inside your refrigerator.

• Supports the crisper cover glass to provide a stable shelf surface
• Forms the lid over the vegetable/crisper drawers to help contain spills
• Helps maintain proper drawer alignment and smooth operation
• Common symptoms: cracked or warped frame, sagging shelf, drawers binding or not closing, broken support tabs

• Disconnect power and remove food from the crisper area
• Slide out crisper drawers; carefully lift out the glass before removing the frame
• Transfer any reusable hardware from the old frame
• Seat the new frame, reinstall the glass and drawers, and verify smooth drawer movement

This refrigerator snack pan shelf assembly supports food items and acts as the cover above the snack/deli drawer. Replace a cracked or missing shelf to restore storage space and proper drawer alignment in the fresh food section.

• Provides a level storage surface and serves as the top cover for the snack/deli pan
• Guides and supports the snack pan for smooth in-and-out movement
• Helps organize the fresh food compartment and maximize usable space
• Common symptoms: cracked or broken shelf, missing shelf, pan sticks or sits crooked, items not level

• Remove food items and the snack pan before starting
• Lift the old shelf assembly straight up and out; avoid prying on liner walls
• Handle carefully; edges can be sharp. Wear cut-resistant gloves if glass is present
• Ensure the new shelf is fully seated on side supports before reinstalling the pan

This right-hand bucket glide supports a refrigerator bin/drawer and forms the track it slides on. It restores smooth, level movement and proper alignment when the original glide is cracked, worn, or missing.

• Provides side support and a smooth sliding track for the bucket/drawer
• Helps keep the bin level and aligned so it opens and closes properly
• Replaces a cracked, warped, or broken right-hand glide
• Common symptoms: drawer sticks, binds, sags, or comes off its track

• Disconnect power and remove food from the affected drawer area
• Slide out the bucket and remove any shelf/frame as needed for access
• Remove mounting screws or tabs, note the glide's orientation, and transfer any hardware
• Position and secure the new right-hand glide; reinstall components and test drawer movement