Jenn-Air Parts

Best Seller

Genuine Whirlpool part

Jenn-Air Defrost Timer

By: Whirlpool

Part Number: W10822278

The Whirlpool Defrost Timer is an OEM replacement part for Whirlpool refrigerators. The defrost timer regulates the automatic defrost cycle, which prevents ice buildup on the evaporator coils in the freezer compartment by sending a signal to the defrost heater to turn on and melt any ice buildup on the coils.

Causes of a bad defrost timer can include mechanical wear over time, electrical failures, or internal component damage. Prolonged usage and voltage spikes can also affect the timer's functionality.

Symptoms of a bad Defrost Timer include:

Excessive frost buildup in the freezer compartment
The refrigerator or freezer not maintaining the set temperatures
Unusual noises coming from the appliance
The appliance running continuously without cycling off

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Too warm
Fridge runs too long
Fridge too cold
Frost buildup

Do-It-Yourself Stories from Customers like You Defrost not working on upright 20 year old freezer W D D. • Spring , TX • September 19, 2014

A word of thanks to AppliancePartsPros - they delivered in one day. Ordered at 4PM CDT and received the part by noon the next day. Also, Alicia in the help department was able to locate an electrical diagram for my old freezer. This was essential for proper setup and her persistence in tracking down the diagram was top notch. Now on to my problem. One day I opened the freezer and found frost and thawing food. I attributed this to the door hitting an item in the freezer and not completely... Read more

$33.95

Compare At:: $40.06
You Save:: $6.11

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Thermal Fuse

4.9 (234)

By: Whirlpool

Part Number: W10258275

The Thermal Fuse Kit is a genuine OEM Replacement part. This kit is designed to cut off power to the dishwasher if it overheats. The fuse ensures that your appliance operates safely and effectively. If your dishwasher is not starting, it may be due to a failed thermal fuse. Investigate what caused the dishwasher to overheat before replacing the thermal fuse.

This Kit Includes:

(1) Thermal Cutoff (TCO)
(1) Harness Assembly
(2) Zip Ties
Instructions

Specs:

Electrical specs: 86°C, 187°F fuse
Construction: metal/plastic
Fuse dimensions: 5/8""L x 5/8""W x 1-1/4""H
Harness and plug dimensions: 4-7/8""L
Zip tie dimensions: 6-3/4""L

Repair your dishwasher today with the Thermal Fuse Kit and ensure that your appliance operates safely and efficiently for years to come.

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Thermal fuse and control panel for my maytag dishwasher both failed and needed to be replaced Richard C. • Cape Canaveral , FL • November 01, 2014

Ordered a new thermal fuse from your website last week and installed it three days ago. This is the second fuse in one year that needed to be replaced. The dishwasher was purchased new in 2012. Relatively easy to replace. Your website had a you tube video that showed how to replace it. Power came back on the control panel, but the start button (not a button, but a touch screen) would not work. This is the second time in two years that the control panel had to be replaced because the start... Read more

$30.95

Compare At:: $36.83
You Save:: $5.88

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Top Burner Receptacle Kit

4.9 (246)

By: Whirlpool

Part Number: 330031

The Top Burner Receptacle Kit is an OEM part for Whirlpool ranges and cooktops designed to provide a reliable electrical connection between the stove's top burners and the power source. This kit typically includes receptacles, wire terminals, and mounting hardware necessary for the installation, ensuring that each burner receives the proper electrical current to heat efficiently.

Causes of a bad top burner receptacle can include corrosion due to spills or moisture, physical damage from heavy use, or natural wear and tear over time.

Symptoms of a bad Top Burner Receptacle Kit include:

A burner that doesn't heat up
Intermittent heating or fluctuating temperatures
Visible signs of damage or corrosion on the receptacle
Sparks or short circuits when attempting to use a burner

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

Personally I have experience working with electricity and knowing if I bought the part required this would be an easy fix. I got my model number and contacted Appliance Parts Pros and placed my order for the new elements, terminal blocks, and for appearance purposes 4 new Drip Pans. Excellent service and quick shipping. I ordered my parts on Sunday and received them on Tuesday. This was a simple repair that only required a screwdriver to remove the old terminal block from the range hood, wire... Read more

$15.66

Compare At:: $18.79
You Save:: $3.13

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Oven Igniter

4.9 (251)

By: Whirlpool

Part Number: 74007498

The Oven Igniter is an OEM part for Whirlpool ovens, designed to ignite the gas in the oven burner, allowing it to heat. This crucial component is responsible for creating the spark that starts the combustion process, enabling your oven to reach the desired temperature for baking or broiling.

Causes of a bad oven igniter include wear and tear from regular use, a buildup of residue that can inhibit the igniter's ability to heat properly, or electrical issues that prevent the igniter from drawing enough current.

Symptoms of a bad Oven Igniter include:

Oven not heating up at all
Oven takes longer than usual to heat up
Gas smell when the oven is turned on, indicating gas is not igniting

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Little to no heat when broiling
Gas igniter glows, but will not light
Gas smell
Little to no heat when baking

Do-It-Yourself Stories from Customers like You Oven ignigter not working. Joan R. • Mount Judea , AR • March 20, 2014

I used the little video clip shown under the part and replaced it myself. Read more

$52.95

Compare At:: $84.49
You Save:: $31.54

IN STOCK

Ships Today Guaranteed

Add to Cart

Do you need help?

Get Questions Answered Instantly.

1-877-477-7278 Online

Live Help

Best Seller

Genuine Whirlpool part

Jenn-Air Washer Drive Belt

4.9 (239)

By: Whirlpool

Part Number: WP21352320

The Washer Drive Belt is an OEM part for Whirlpool washing machines. It is crucial for transmitting the power from the motor to the drum, enabling the washing machine to tumble and spin during the wash and spin cycles. The drive belt wraps around the motor and drum pulleys, providing the necessary traction and tension to operate efficiently.

Causes of a bad Washer Drive Belt can include stretching over time, which reduces its efficiency to grip the pulleys properly, or fraying and cracking due to age and normal wear and tear. Misalignment or improper installation can also lead to premature belt failure.

Symptoms of a bad Washer Drive Belt include:

The washing machine failing to spin or agitate.
A burning smell or unusual noises during operation, indicating slippage or rubbing.
Visible signs of wear like cracks, fraying, or noticeable looseness on the belt.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This part fixes the following symptoms

Burning smell
Will not agitate
Spins slowly
Pumps but will not spin

Do-It-Yourself Stories from Customers like You The drive belt on my maytag washing machine was worn out Donnie B. • Campobelly , SC • July 23, 2014

I Purchased a new belt and replaced it. If I had not watched the video telling me how it is done the job would have been much more difficult. After watching the video I changed the belt in less than 2 minutes. I ordered the belt from Appliance Parts Pros and got it the next day. I am thankful that when I started my search I landed on your web site. Thanks for the quick service and the video. Read more

$15.95

Compare At:: $23.33
You Save:: $7.38

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Compressor Start Relay

4.9 (73)

By: Whirlpool

Part Number: W10613606

The Compressor Start Relay is an OEM part for Whirlpool refrigerators. This component helps to kickstart the compressor, facilitating the refrigeration cycle that cools the interior of the fridge.

Such issues can stem from electrical failures within the relay, physical damage, or wear and tear from regular use. When the relay does not function correctly, it can lead to inconsistent cooling and, in severe cases, cause the compressor to overheat and fail prematurely.

Symptoms of a failing Compressor Start Relay include:

The refrigerator not cooling properly or not cooling at all
A noticeable clicking sound emanating from the back of the refrigerator, indicating the relay is trying to start the compressor but failing
The refrigerator starts and stops frequently, unable to maintain a constant temperature

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Clicking sound
Won't start
Freezer section too warm
Fridge too warm

Do-It-Yourself Stories from Customers like You Fan would run but compressor would not start-resulting in no cooling. Thomas F. • De Soto , WI • March 14, 2014

Removed back cover and installed new start device. Plugged in refridgerator and it runs like new. Read more

$53.27

Compare At:: $74.44
You Save:: $21.17

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Oven Bake Element

4.9 (251)

By: Whirlpool

Part Number: WP74010750

The Oven Bake Element is an OEM part for Whirlpool ovens. This crucial component is responsible for providing the heat necessary for baking. Located at the bottom of the oven, the bake element heats up when electricity passes through it, allowing your oven to reach the desired cooking temperature. This OEM Replacement Part has push-on terminal ends and measures approximately 23-5/8"wide x 15-3/8" long, with 3-3/8" inserts

Symptoms of a failing oven bake element include:

Lack of heat production when the oven is turned on
Uneven baking results
Visible damage to the element such as blistering or splits
A trip in the circuit breaker when the oven is activated

Causes of bake element failure typically include thermal stress causing material fatigue, accidental damage during cleaning, and electrical issues such as short circuits.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you are unable to use your old connectors order TJMA02875-1.

This part fixes the following symptoms

Little to no heat when baking
Oven not heating evenly
Element will not heat
Oven is too hot

Do-It-Yourself Stories from Customers like You The baking element was on fire Charles M. • Bandera , TX • March 30, 2014

I finally found the right serial number and found the part at Appliance Parts Pros. I was skeptical that they would send the element that had the correct rear brace fixture. when it came 2 days later i opened the box the Part was correct and it took about 15 minutes to replace since there are only two screws. My oven works fine now. THX Read more

$39.95

Compare At:: $47.14
You Save:: $7.19

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Oven Igniter

4.9 (150)

By: Whirlpool

Part Number: W11596211

The Oven Igniter is an OEM part for Whirlpool ovens. It is responsible for igniting the gas to start the oven heating process. This igniter is crucial for ensuring that the oven reaches and maintains the desired temperature for baking and cooking.

Over time, the igniter can suffer from wear and tear, leading to inefficient ignition or complete failure. Causes of a bad igniter can include repeated heating cycles, electrical issues, or physical damage to the igniter element.

Symptoms of a bad igniter include:

The oven not heating up or taking too long to preheat
A noticeable gas smell due to incomplete ignition
The igniter glowing without igniting the gas

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Baking igniter burned out. Christopher C. • Pittsboro , NC • December 19, 2020

On my Jenn-Air downdraft range, the oven stopped heating. The broiler still worked. So pulled the pan off the bottom so I could see and found the igniter wasn't glowing to start the gas. I had replaced the full electronic control panel using Appliance Parts Pros so knew they had the full breakdown of parts for my model. I found the igniter and ordered. But frankly, I wasn't sure about doing the repair myself. It looked easy enough from videos and discussions here. Still, dealing with the... Read more

$61.95

Compare At:: $73.72
You Save:: $11.77

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Gasket

4.9 (30)

By: Whirlpool

Part Number: W10443320

The Refrigerator Gasket is an OEM replacement part for Whirlpool refrigerators. This gasket forms a tight seal around the refrigerator or freezer door, helping to maintain the internal temperature and preserve energy efficiency. By keeping warm air out and cold air in, it ensures the freshness of your stored food.

Symptoms of a bad Refrigerator Gasket include:

The door not sealing tightly, leading to temperature fluctuations
Increased energy consumption or the refrigerator running more frequently
Visible cracks, tears, or warping in the gasket material
Moisture or frost buildup inside the fridge or freezer

Causes of a failing Gasket can include wear and tear from regular use, exposure to temperature changes, improper cleaning methods, or accidental damage. Over time, these factors can reduce the gasket’s effectiveness.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Due to bad door seal ice built up in bottom of freezer water then leaking out Christopher K. • Alexandria , VA • July 19, 2016

Door gasket was easy to remove and reinstall. Original gasket was penetrated while cleaning food stuff from folds in the seal below the frig doors. (Gasket is very fragile so don't try to expand the folds while cleaning. I used my finger and a paper towel but in hindsight should have used a Q-Tip. Also, when installing the new gasket you have to be sure the seam folds over the edge of the door and doesn't get caught underneath. Read more

$86.95

Compare At:: $122.60
You Save:: $35.65

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Charcoal Filter

4.9 (262)

By: Whirlpool

Part Number: 8206230A

This Charcoal Filter is an OEM replacement part for Whirlpool microwaves. The charcoal filter is responsible for improving the air quality in the kitchen by removing impurities and odors from the air. It is used to remove smoke, grease, and cooking odors as it is drawn up through the vent fan. By trapping these particles, the filter helps maintain cleaner air in the kitchen and prevents odors from recirculating and affecting the taste and smell of your food.

Causes of a bad Charcoal Filter include saturation from absorbing smoke and odors over time, accumulation of grease and particles that clog the filter, leading to decreased effectiveness, and physical damage that compromises its ability to filter air properly.

Symptoms of a bad Charcoal Filter include:

Persistent odors in the kitchen after cooking.
Smoke not being effectively vented out during microwave use.
Reduced airflow from the microwave's venting system.

Replacing the charcoal filter at regular intervals or when these symptoms are noticed ensures that your microwave continues to operate efficiently and keeps your kitchen air clean. This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

Description- Color: metallic. Measures about 5 inches wide by 5 inches deep.

This part fixes the following symptoms

Exhaust fan not working

Do-It-Yourself Stories from Customers like You Low airflow through vent; filter service indicated on display Brent E. • Mountain View , CA • March 20, 2014

Replacing this filter was very easy: two screws hold in the grill cover at the top of the microwave, and then the filter just slides in and out of its holder. There was quite a bit of grease in the area, probably pulled there by the vent from the stove top. I cleaned the grease up and also hand-washed the wire-mesh filter on the bottom of the microwave with soap and warm water. Airflow when running the vent is now noticeably better. Read more

$15.66

Compare At:: $18.64
You Save:: $2.98

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Thrust Bearing Kit

4.8 (125)

By: Whirlpool

Part Number: 12002213

The Thrust Bearing Kit is an OEM part for Whirlpool washing machines. This kit is essential for the proper operation of the washer's transmission system, allowing the drive system to engage smoothly and efficiently.

Over time, components within the thrust bearing kit can wear down or become damaged due to the constant stress and movement they endure during the wash cycle. This wear can lead to issues with the washing machine's ability to agitate or spin correctly.

Symptoms of a bad Thrust Bearing Kit include:

The washing machine is noisy during operation
The washer struggles to agitate or spin
The washing machine may fail to spin at all, leaving clothes wet at the end of the cycle
Excessive vibration during use

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

This part fixes the following symptoms

Spins slowly
Pumps but will not spin
Will not agitate

Do-It-Yourself Stories from Customers like You Washer squeaked when tub is stopped during spin cycle Daniel K. • Grafton , WI • July 22, 2018

My Maytag washer make a loud screech when the washer tub needed to be stopped by the brake. Last year, I had replaced the suspension springs, the snubber ring, the drive belt and the drain pump. Those repairs worked fine, but a few weeks later, the screeching noise started. So I figured it was the brake system. I thought it would be better to replace the brake rotor and stator together as a set since I was going to disassemble both and they were 18 years old anyway. I decided to replace the... Read more

$43.95

Compare At:: $59.58
You Save:: $15.63

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Drain Pump

4.8 (21)

By: Whirlpool

Part Number: W10876537

The Pump-Drain is an OEM part for Whirlpool dishwashers. This drain pump plays a pivotal role in the dishwasher's functionality, actively pumping out used water to prepare the appliance for the next load.

Causes of a bad Pump-Drain can include obstruction by debris or food particles, wear and tear from regular use, and electrical failures that can impair the pump's ability to function.

Symptoms of a failing Pump-Drain include:

Water not draining completely after cycles
Unusual noises coming from the pump area during or after the cycle
The dishwasher not starting due to the presence of standing water
Error codes related to draining displayed on the dishwasher

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Drain pump was not working due to broken glass in the bottom of the dishwasher Stephen B. • Shelby , NC • January 14, 2019

I tipped the dishwasher over and replaced the drain pump. Very simple replacement. Read more

$61.95

Compare At:: $75.23
You Save:: $13.28

IN STOCK

Ships Today Guaranteed

Add to Cart

Shop With Confidence

Over 15 million customers served!

365-Day Returns

Hassle-free Returns

Fast Delivery

1.7 Days on Average!

Free Tech Support

On all purchased parts!

Best Seller

Genuine Whirlpool part

Jenn-Air Stove Top Drip Pan

4.9 (224)

By: Whirlpool

Part Number: WPW10196405

The Stove Top Drip Pan is an OEM replacement part for Whirlpool ranges. It is the shallow metal pan located below the stove burner elements that collects grease and food particles. The drip pan helps direct spills and drips away from the burner area to the bottom drawer for easy cleanup.

Symptoms of a bad drip pan include:

Grease or food spilling below the burners outside of the pan
Burner elements showing signs of corrosion or damage from drips
The drip pan no longer fitting properly or securely in place

Causes can be warping or damage of the drip pan over time due to exposure to heat. Dents and structural changes compromise its ability to direct drips properly.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

If you require a compatible 6-inch drip bowl, suggest considering our WPW10196406 model for a perfect fit. For a black option include the 6-inch W10290353RW and 8-inch WPW10290350 models.

This part fixes the following symptoms

Element will not heat

Do-It-Yourself Stories from Customers like You Our range needed 4 new range top elements due to wear Dale D. • Orlando , FL • December 05, 2014

$9.95

Compare At:: $11.94
You Save:: $1.99

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Flat Style Dryer Igniter

4.9 (316)

By: Whirlpool

Part Number: 4391996

The Flat Style Dryer Igniter is an OEM part for Whirlpool dryers. This essential component is responsible for igniting the gas in the burner, allowing the dryer to heat up and effectively dry your clothes. The igniter heats up to a high temperature to ignite the gas, starting the heating process necessary for drying.

Causes of a bad dryer igniter include wear over time due to repeated heating cycles, electrical failures that prevent the igniter from heating, and physical damage which can cause the igniter to break or malfunction.

Symptoms of a bad dryer igniter include:

Dryer not heating up despite being turned on
Gas smell indicating the gas is not being ignited
No visible glow from the igniter area when the dryer is activated

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Dryer was not heating Bob H. • Del Mar , CA • January 31, 2015

I checked repair videos on line. Put in my brand and model. You tube had a video how to dis assemble my model. Video made it really easy, I would never have figured it out. Now checked videos from Appliance Parts Pros to troubleshoot the fix. Checked all thermostats and fuses with ohm meter they checked out perfect. Finally checked the igniter found out I did not have resistance. I was also concerned I may need new coils (solenoids). In visiting with customer service he explained... Read more

$28.24

Compare At:: $33.61
You Save:: $5.37

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Gasket-Fip (Wht) Rh Door

5.0 (51)

By: Whirlpool

Part Number: W10830189

Color: White
Note: For RH Door. For BLACK gasket, order W11368721.

The Refrigerator Door Gasket is an OEM part for Whirlpool refrigerators. This part forms a seal around the refrigerator or freezer door, ensuring that cold air stays inside and warm air stays out. By maintaining a tight seal, the gasket plays a critical role in the appliance's energy efficiency, helping to keep food fresh and safe while minimizing energy consumption.

Over time, door gaskets can lose their elasticity, get torn, or wear out, leading to gaps between the gasket and the refrigerator frame.

Symptoms of a bad Refrigerator Door Gasket include:

Visible cracks, tears, or wear in the gasket
Condensation or frost buildup near the door edges
The refrigerator or freezer door does not close as tightly as it should
Increased energy consumption as the refrigerator works harder to maintain temperature

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Do-It-Yourself Stories from Customers like You Rubber seal/gasket was torn on our refrigerator Ken S. • Simi Valley , CA • November 23, 2021

The rubber seal/gasket was torn on our KitchenAid refrigerator right side door. I purchased the replacement and followed the directions/recommendations of how to prepare the new gasket for installation. When it's removed from the shipping box, it does have wrinkles and preparing it is a must. I set it out on our tile floor and then used a heat gun (low setting) to warm it up and massage it. It took me about 15 minutes, stopping and restarting as I let the rubber come back to it's desired shape.... Read more

$134.26

Compare At:: $161.11
You Save:: $26.85

IN STOCK

Ships Today Guaranteed

Add to Cart

Best Seller

Genuine Whirlpool part

Jenn-Air Upper Dishrack Track

4.9 (58)

By: Whirlpool

Part Number: WPW10195623

The Upper Dishrack Track is an OEM part for Whirlpool dishwashers. This component is essential for the smooth and stable movement of the upper dishrack, allowing it to slide in and out.

Causes of a bad Upper Dishrack Track can include accumulation of debris that impedes the track's function, wear and tear from regular use, or damage from overloading the dishrack, which can lead to warping or cracking.

Symptoms of a bad Upper Dishrack Track include:

Difficulty pulling out or pushing in the upper dishrack.
The dishrack becoming stuck or derailing during movement.
Unusual noises when moving the dishrack, such as grinding or clicking.
Visible signs of wear or damage to the track.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Do-It-Yourself Stories from Customers like You Top rack of dishwasher was falling down when pulled out Joanne P. • Andover , MA • October 13, 2014

Replaced wheel assembly because prongs were broken and replaced track because wheel assemblies were rolling out from the track when extended. Read more

$52.33

Compare At:: $62.27
You Save:: $9.94

IN STOCK

Ships Today Guaranteed

Add to Cart

Appliance

Appliance

Lawn & Garden

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Jenn-Air Parts

Jenn-Air Defrost Timer

Jenn-Air Thermal Fuse

Jenn-Air Top Burner Receptacle Kit

Jenn-Air Oven Igniter

Jenn-Air Washer Drive Belt

Jenn-Air Compressor Start Relay

Jenn-Air Oven Bake Element

Jenn-Air Oven Igniter

Jenn-Air Gasket

Jenn-Air Charcoal Filter

Jenn-Air Thrust Bearing Kit

Jenn-Air Drain Pump

Jenn-Air Stove Top Drip Pan

Jenn-Air Flat Style Dryer Igniter

Jenn-Air Gasket-Fip (Wht) Rh Door

Jenn-Air Upper Dishrack Track

Appliance Type

Popular Jenn-Air Models