Kitchenaid Control Board

The Electronic Control is an OEM replacement part for Whirlpool gas ranges. It controls various functions such as temperature regulation, timer settings, and cooking modes.

A bad oven control board can occur due to electrical malfunctions, power surges, or general wear and tear. If you notice symptoms such as the oven not reaching the desired temperature, erratic temperature fluctuations, or unresponsive controls, it may be time to replace the control board.

Symptoms of a bad oven control board include:

• Oven not reaching desired temperature
• Erratic temperature fluctuations
• Unresponsive controls

Restore the functionality and precision of your Whirlpool gas range by replacing the faulty or worn-out oven control board with this genuine OEM part.

This Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This console flat kit restores the flat control-panel trim on a stove or range for a clean, finished appearance and protection for the controls. Designed as a direct replacement for the damaged or worn console surface. What it does:

• Replaces a cracked, scratched, faded, or missing flat console trim to restore appearance
• Covers and protects the control area from spills, grease, and debris
• Helps ensure proper alignment of front-facing control components and buttons
• Reduces chance of foreign objects entering the control cavity through damaged trim

• Disconnect power to the appliance before starting any work to avoid shock or injury.
• Some models require removing trim screws or control knobs; save and reuse original hardware.
• Align the part carefully with existing mounting points; do not force—check for hidden clips or fasteners.
• Take care around wiring and electronic controls.

The Inverter Box is an OEM component specifically designed for Whirlpool French door refrigerators. Located inside the refrigerator compartment top behind removable panels, the inverter box houses electronic components that control the compressor motor and refrigeration systems.

Causes of a bad inverter box include failure of internal circuit boards over several years of regulating refrigeration cycles or damage from liquid spills inside the unit.  

Symptoms of a bad inverter box include:

• Failure of the refrigerator section to adequately cool and maintain temperatures
• Erratic fluctuations in cold air dispensing from vents     
• Repeated triggering of defrosting modes unnecessarily 
• Inability to regulate between freezer and refrigerator settings

This Whirlpool replacement part is compatible with Maytag, Jenn-Air, Amana, Magic Chef, and Kenmore side-by-side refrigerators.
 

The Microwave Inverter Board is an OEM part for Whirlpool brand microwaves. This board works with the magnetron to convert voltage and power the cooking elements. 

Causes of a bad inverter board can include failure of electronics over time, shorts or current leaks, or improper installation.

Symptoms of a bad inverter board include:

• The microwave will not power on or heat food properly  
• Sparking or burning smells are detected inside the microwave cavity
• The display console does not illuminate or function correctly
• Error codes are frequently displayed

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore models.

Color: Stainless

The Dispenser Control Board is an OEM part for Whirlpool refrigerators. It is responsible for controlling the various functions of the refrigerator dispenser, such as ice dispensing and water flow. It communicates with other electronic components to ensure accurate dispensing of ice and water, as well as controlling the display and lights associated with the dispenser.

A bad dispenser control board can occur due to electrical malfunctions, damage from power surges, or wear and tear over time. If you notice symptoms such as the dispenser not working, the display not lighting up, or erratic behavior from the dispenser, it may be time to replace this part.

Symptoms of a bad dispenser control board include:

• Dispenser not working
• Display not lighting up
• Erratic behavior from the dispenser

Restore your Whirlpool refrigerator's dispenser by replacing the faulty or damaged dispenser control board with this genuine OEM part.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The UI Control Board is an OEM part for Whirlpool fridge displays. It processes inputs from touch buttons to manage temperature zones, lighting, and dispenser functions. 

Causes of failure relate to damage from prolonged exposure to ambient temperatures inside fridges. Regular thermal stresses can degrade sensitive electronic connections.

Symptoms of a bad UI control board include:

• Non-functional touchpad buttons   
• Inability to select temperatures or modes
• Faulty or blank control screen 
• LED lights or dispensers stopped working

This OEM replacement is compatible also with Maytag, KitchenAid, Jenn-Air and Kenmore fridges.

The Control-Electric Assembly is an OEM component specifically designed for Whirlpool refrigerators. It plays a vital role in regulating and controlling the electrical functions that power the refrigerator and its components. 

Symptoms of a bad control-electric assembly include:

• The refrigerator failing to turn on or encountering temperature control issues 
• Fault codes or error messages being continuously displayed
• Inability to regulate temperature zones
• Intermittent or unreliable operation of internal lighting and fans

Causes of a bad control-electric assembly can include water damage from potential leaks, failure or malfunction of electronic components over time, or issues with power distribution circuits.  

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. It serves as the central hub for managing various functions and settings of the refrigerator, including temperature regulation, defrost cycles, and energy-efficient operations. This critical component ensures that all electronic and mechanical parts are synchronized for optimal performance.

Causes of a bad Electronic Control Board can include power surges, exposure to moisture, or general electronic failures. Such issues can impair the board's ability to send and receive signals correctly, affecting the refrigerator's functionality.

Symptoms of a failing Electronic Control Board include:

• The refrigerator not cooling properly
• Irregular or inconsistent temperatures
• The display panel malfunctioning or displaying incorrect information
• Unusual noises due to relays clicking on and off irregularly

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Electronic Control Board is an OEM part for Whirlpool refrigerators. This component acts as the brain of the refrigerator, managing and regulating various functions such as temperature control, defrost cycles, and the operation of fans and compressors. By processing inputs from sensors and user settings, the control board ensures that the refrigerator operates efficiently and maintains the desired temperature.

Causes of a bad control board can include power surges, electrical component failures, or damage from moisture or debris. A malfunctioning control board can lead to various operational issues and inconsistent performance.

Symptoms of a bad electronic control board include:

• The refrigerator not cooling properly
• The freezer or refrigerator compartments being too warm or too cold
• The refrigerator not running at all
• Erratic or unresponsive control panel
• Unusual noises or failure to start the defrost cycle

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Control Board is an OEM part for Whirlpool dishwashers. As the central processing unit, this board regulates all cycles and component functions including wash and rinse settings, heating controls and the digital display.

Symptoms of a failed control board include:

• Inability to select or change wash/rinse options
• Cycles failing to complete through all settings
• Error codes displayed or unresponsive controls

Causes can be normal wear of electronic components over extended use. Exposure to fluctuating internal temperatures may also deteriorate electrical connections over time.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.

The OEM Electronic Control Board is an OEM replacement part for Whirlpool dishwashers. It is a circuit board that controls all of the functions of the dishwasher, including the wash cycles, water temperature, and detergent dispensing.

Causes of failure involve damage from liquid intrusion shortening circuits or component deterioration over extended use reducing precision.

Symptoms include:

• Dishwasher fails to start selected cycle
• Lights, displays or programming malfunctions
• No response from control buttons
• Dishwasher appears dead or powerless

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air and some Kenmore models.

This electronic control board is the appliance's central controller. It interprets user inputs and sensor signals to power components at the right time, restoring reliable operation when the original board fails.

• Interprets user settings and manages cycle timing and temperature control
• Switches relays/outputs to run motors, heaters, valves, fans, and lights
• Interfaces with sensors and safety switches to protect the appliance
• Symptoms can include no display or response, won't start, cycles that won't advance, or erratic operation
• Logs diagnostic error codes to aid troubleshooting

• Disconnect power before servicing; follow ESD precautions and handle the board by the edges
• Access the control area, then note/photograph wiring and move connectors one at a time to the new board
• Mount securely, ensure no wires are pinched, reassemble, and restore power
• Run a diagnostic or test cycle to confirm normal operation

This electronic control board is the appliance's main brain. It manages cycles and powers key components based on sensor and user input, restoring normal operation and responsive controls when the original board fails.

• Directs the appliance's operations by processing inputs from sensors and the user interface
• Distributes power to motors, valves, heaters, fans, and other loads as needed
• Monitors system status and logs/communicates fault or error codes
• Typical failure symptoms: won't start, unresponsive controls, stops mid-cycle, intermittent power, or recurring error codes

• Disconnect power to the appliance before servicing
• Use ESD protection and handle the board by its edges
• Photograph wire/connector positions; transfer connectors one at a time to the new board
• Ensure all harnesses are fully seated and the board is secured; run a diagnostic or test cycle after installation

This electronic power supply board converts incoming AC power to the low-voltage DC used by the refrigerator's controls and components. Replacing a failed board restores stable power to the UI, fans, lights, and cooling functions.

• Converts line voltage to regulated low-voltage DC for control electronics
• Distributes power to the main control, display, sensors, fans, and valve/relay circuits
• Common signs include a blank or non-responsive control panel, no interior lights or dispenser, intermittent power/clicking, or the unit not running even though the outlet has power
• Failures may follow electrical surges or shorted loads

• Disconnect power at the breaker or unplug before servicing; capacitors may hold a charge
• Use ESD protection and handle the board by its edges
• Photograph/label all connectors; transfer wires one by one and ensure full seating
• Mount securely and inspect for pinched/shorted wires before restoring power

This replacement insert restores the proper fit and finish of the appliance where a small trim or mounting piece is missing or damaged. It helps secure adjacent panels and prevents gaps or rattling for a cleaner, quieter cabinet. What it does

• Replaces a damaged or missing trim/mounting insert to restore fit and appearance
• Secures panels or components to reduce movement and rattling
• Helps maintain proper alignment of surrounding parts
• Addresses symptoms like visible gaps, loose trim, or vibration noises

• One insert

• Disconnect power before accessing panels or internal areas
• Remove the surrounding trim or panel to access the insert; basic hand tools may be required
• Handle carefully to avoid scratching finished surfaces; do not force parts into place
• Replace fasteners or clips to ensure a secure fit